31 results (0,15132 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

John Guest 15MM X 3/8" BSP Ring Main Straight Adaptor

John Guest 15MM X 3/8" BSP Ring Main Straight Adaptor

These Straight Adaptors re designed to convert from push-fit to threaded connector. The John Guest Push-fit system provides the ideal connection from compressor to air-line service components through to complete ring main and take off points. Designed for quick installation via the push-in installation, this range of adaptors can be used with most plastic and mild metal pipes. Available in a range of sizes. Features and Benefits Can be used with UPVC, ABS, polyethylene, nylon, mild steel and copper pipes for versatility of use Simple push in action to connect the piece for simplicity Can easily be disconnected, altered or moved to allow you to use the component in the way that best suits your needs Available in a variety of specifications to suit your requirements Typical Applications Plumbing DIY Engineering Notes Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar Temperature: +70C. Pressure: 7bar Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm Size: 1". Plastic threads: N/A. Metal threads: N/A PM011514E has no thread seal

GBP 3.99
1

John Guest 12MM X 3/8" BSP Ring Main Straight Adaptor

John Guest 12MM X 3/8" BSP Ring Main Straight Adaptor

These Straight Adaptors re designed to convert from push-fit to threaded connector. The John Guest Push-fit system provides the ideal connection from compressor to air-line service components through to complete ring main and take off points. Designed for quick installation via the push-in installation, this range of adaptors can be used with most plastic and mild metal pipes. Available in a range of sizes. Features and Benefits Can be used with UPVC, ABS, polyethylene, nylon, mild steel and copper pipes for versatility of use Simple push in action to connect the piece for simplicity Can easily be disconnected, altered or moved to allow you to use the component in the way that best suits your needs Available in a variety of specifications to suit your requirements Typical Applications Plumbing DIY Engineering Notes Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar Temperature: +70C. Pressure: 7bar Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm Size: 1". Plastic threads: N/A. Metal threads: N/A PM011514E has no thread seal

GBP 3.59
1

John Guest 22MM X 1/2" BSP Ring Main Stem Adaptor

John Guest 22MM X 1/2" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 3.09
1

John Guest 12MM Ring Main End Stop

John Guest 12MM Ring Main End Stop

End Stop Provides permanent or temporary shut off. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.99
1

John Guest 15MM Ring Main Straight Connector

John Guest 15MM Ring Main Straight Connector

These straight connectors are used to connect pipe end to end. With a push fit system, these fittings provide an ideal connection from compressor to air-line service components through to complete ring main and take off points. The connectors can be installed quickly and easily for convenience. The push in action provides a positive lock without needing to use solvents or sealants and can be disconnected, altered or extended with ease. The product is suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. Possesses a working temperature range of -20C to +70C. Features and Benefits Push-fit technology makes for positive locking without the need for solvents or sealants Quick disconnection without the need for tools to allow you to make the system work for your needs Food Quality and suitable for potable liquids for versatility of safe use Suitable for soft metal or plastic tubes and can be used for transporting air as well as inert gases Possesses superior flow characteristics Typical Applications Plumbing Automotive Notes Working Pressure: Temperature: +23C. Pressure: 10bar Temperature: +70C. Pressure: 7bar Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD Maximum Torque Values Size: 3/8in. Plastic threads: 3.0Nm. Metal threads: N/A Size: 1/2in. Plastic threads: 3.0Nm. Metal threads: 4.0Nm Size: 3/4in. Plastic threads: 4.0Nm. Metal threads: 5.0Nm Size: 1in. Plastic threads: N/A. Metal threads: N/A

GBP 2.69
1

John Guest 12MM Ring Main Straight Connector

John Guest 12MM Ring Main Straight Connector

These straight connectors are used to connect pipe end to end. With a push fit system, these fittings provide an ideal connection from compressor to air-line service components through to complete ring main and take off points. The connectors can be installed quickly and easily for convenience. The push in action provides a positive lock without needing to use solvents or sealants and can be disconnected, altered or extended with ease. The product is suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. Possesses a working temperature range of -20C to +70C. Features and Benefits Push-fit technology makes for positive locking without the need for solvents or sealants Quick disconnection without the need for tools to allow you to make the system work for your needs Food Quality and suitable for potable liquids for versatility of safe use Suitable for soft metal or plastic tubes and can be used for transporting air as well as inert gases Possesses superior flow characteristics Typical Applications Plumbing Automotive Notes Working Pressure: Temperature: +23C. Pressure: 10bar Temperature: +70C. Pressure: 7bar Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD Maximum Torque Values Size: 3/8in. Plastic threads: 3.0Nm. Metal threads: N/A Size: 1/2in. Plastic threads: 3.0Nm. Metal threads: 4.0Nm Size: 3/4in. Plastic threads: 4.0Nm. Metal threads: 5.0Nm Size: 1in. Plastic threads: N/A. Metal threads: N/A

GBP 3.39
1

John Guest 15MM Ring Main Stop End

John Guest 15MM Ring Main Stop End

End Stop Provides permanent or temporary shut off. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 2.69
1

John Guest 15MM X 3/8" BSP Ring Main Stem Adaptor

John Guest 15MM X 3/8" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 1.59
1

John Guest 28MM Ring Main Black Plug

John Guest 28MM Ring Main Black Plug

Plug Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.09
1

John Guest 22MM Ring Main Black Plug

John Guest 22MM Ring Main Black Plug

Plug Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 2.59
1

John Guest 12mm RINGMAIN BLACK PLUG

John Guest 12mm RINGMAIN BLACK PLUG

Plug Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 1.39
1

John Guest 12MM X 1/2" BSP Ring Main Stem Adaptor

John Guest 12MM X 1/2" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 1.89
1

John Guest 12MM X 3/8" BSP Ring Main Stem Adaptor

John Guest 12MM X 3/8" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 1.69
1

John Guest 15MM X 1/2" BSP Ring Main Stem Adaptor

John Guest 15MM X 1/2" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 3.39
1

John Guest 22MM X 3/4" BSP Ring Main Stem Adaptor

John Guest 22MM X 3/4" BSP Ring Main Stem Adaptor

Stem Adaptors Converts push-fit to male thread. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range: Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure: Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8" - Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2" - Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4" - Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1" - Plastic threads: N/A. Metal threads: N/A.

GBP 3.49
1

John Guest 22MM Ring Main Stop End

John Guest 22MM Ring Main Stop End

End Stop Provides permanent or temporary shut off. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.09
1

John Guest 15MM Ring Main Black Plug

John Guest 15MM Ring Main Black Plug

Plug Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 1.99
1

John Guest 18MM Ring Main Black Plug

John Guest 18MM Ring Main Black Plug

Plug Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.69
1

5x John Guest 12MM Ring Main Collet Cover

5x John Guest 12MM Ring Main Collet Cover

Collet Covers Prevent accidental removal or tampering with piping. Can be removed to allow the pipe to be disconnected as and when required. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 1.85
1

5x John Guest 15MM Ring Main Collet Cover

5x John Guest 15MM Ring Main Collet Cover

Collet Covers Prevent accidental removal or tampering with piping. Can be removed to allow the pipe to be disconnected as and when required. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 2.30
1

5x John Guest 22MM Ring Main Collet Cover

5x John Guest 22MM Ring Main Collet Cover

Collet Covers Prevent accidental removal or tampering with piping. Can be removed to allow the pipe to be disconnected as and when required. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 2.95
1

John Guest 15MM-12MM Ring Main Reducer

John Guest 15MM-12MM Ring Main Reducer

Reducer Use with other fittings and pipe to reduce pipe sizes. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.99
1

John Guest 15MM-10MM Ring Main Reducer

John Guest 15MM-10MM Ring Main Reducer

Reducer Use with other fittings and pipe to reduce pipe sizes. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 3.79
1

John Guest 28RA Release Aid

John Guest 28RA Release Aid

Release Aid The action of pressure in a system could increase the grip of the collect. The release aid allows a firmer grip on the collect while removing the pipe. Push-fit System - Compressed Air Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard. Working Temperature Range Minimum Working Temperature -20C Maximum Working Temperature +70C Working Pressure Temperature: +23C. Pressure: 10bar. Temperature: +70C. Pressure: 7bar. Tolerances Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A. Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm. Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm. Size: 1". Plastic threads: N/A. Metal threads: N/A.

GBP 1.29
1

John Guest 15MM Ring Main Equal Elbow

John Guest 15MM Ring Main Equal Elbow

This range of equal elbows are designed to connect plain pipe at 90. With a push-fit system, the products are designed for use with compressed air systems. They are designed to provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. With a working temperature range of -20C to +70C, working pressure range of 10 bar up to +23 and 7 bar up to +70, the range is robust and versatile. Features and Benefits Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, Polyethylene, nylon, mild steel and copper making for a versatle product All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent to save you time when working Quick disconnection without the need for tools for ease Designed to allow for superior air flow Suited for air as well as inert gases depending on your needs Available in a range of sizes to suit your needs Typical Applications Automotive Engineering Notes It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard Tolerances: Size: 12mm to 28mm OD. Tolerance: +0.05 to -0.10mm OD. Maximum Torque Values: Size: 3/8". Plastic threads: 3.0Nm. Metal threads: N/A Size: 1/2". Plastic threads: 3.0Nm. Metal threads: 4.0Nm Size: 3/4". Plastic threads: 4.0Nm. Metal threads: 5.0Nm Size: 1". Plastic threads: N/A. Metal threads: N/A

GBP 2.99
1