106 results (0,20526 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Kennedy Chrome/Leather Apron B&S24X36" Grey

Kennedy Chrome/Leather Apron B&S24X36" Grey

Manufactured from high-quality, specially selected chrome leather, these generous fit rugged aprons deliver excellent quality at the perfect price. Protecting users against weld spatter and grinding sparks, wearers are allowed complete freedom of movement for comfortable extended wear. Features and Benefits Spatter and tear-resistant for long product life Delivers maximum protection to the torso and upper leg Heavy-duty stitching on the seams for durability Typical Applications Workshops Foundries Standards CE certified EN470-1 CAT II Notes Available in a choice of tie or buckle fastening

GBP 10.99
1

Kennedy 4820.B 480x370x205mm Explorer Case IP67

Kennedy 4820.B 480x370x205mm Explorer Case IP67

This range of explorer cases are all watertight, waterproof, sand-proof and dust-proof, offering excellent resistance against shocks and harsh weather. They are designed specifically to transport sensitive devices such as electronics and documentation. Made of copolymer polypropylene, the cases are resistant to both cold and hot temperatures (-33C / +90C) and are durable, long-lasting transportation devices.Features and Benefits Jam-free purge valve and latches Heavy-duty cases Water, chemical and temperature resistantTypical Applications Ideal for transporting sensitive electronic devices, documentation computerised devices and other equipment

GBP 199.99
1

10x Kennedy 3818.B 380x270x180mm Explorer Case IP67

10x Kennedy 3818.B 380x270x180mm Explorer Case IP67

This range of explorer cases are all watertight, waterproof, sand-proof and dust-proof, offering excellent resistance against shocks and harsh weather. They are designed specifically to transport sensitive devices such as electronics and documentation. Made of copolymer polypropylene, the cases are resistant to both cold and hot temperatures (-33C / +90C) and are durable, long-lasting transportation devices.Features and Benefits Jam-free purge valve and latches Heavy-duty cases Water, chemical and temperature resistantTypical Applications Ideal for transporting sensitive electronic devices, documentation computerised devices and other equipment

GBP 1349.90
1

Kennedy 2MM HSS-Cobalt B/N KC3 Throwaway Cutter

Kennedy 2MM HSS-Cobalt B/N KC3 Throwaway Cutter

Ball Nose - Metric Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. *Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric Tolerances: Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020. Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated. TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity. TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

GBP 4.99
1

Kennedy 6MM HSS-Cobalt B/N KC3 Throwaway Cutter

Kennedy 6MM HSS-Cobalt B/N KC3 Throwaway Cutter

Ball Nose - Metric Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. *Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric Tolerances: Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020. Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated. TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity. TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

GBP 3.59
1

Kennedy 2.5MM HSS-Cobalt B/N KC3 Throwaway Cutter

Kennedy 2.5MM HSS-Cobalt B/N KC3 Throwaway Cutter

Ball Nose - Metric Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. *Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric Tolerances: Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020. Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated. TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity. TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

GBP 5.99
1

Kennedy 7630.B 765x485x305mm Explorer Case comes with Wheels IP67

Kennedy 7630.B 765x485x305mm Explorer Case comes with Wheels IP67

This range of explorer cases are all watertight, waterproof, sand-proof and dust-proof, offering excellent resistance against shocks and harsh weather. They are designed specifically to transport sensitive devices such as electronics and documentation. Made of copolymer polypropylene, the cases are resistant to both cold and hot temperatures (-33C / +90C) and are durable, long-lasting transportation devices.Features and Benefits Jam-free purge valve and latches Heavy-duty cases Water, chemical and temperature resistantTypical Applications Ideal for transporting sensitive electronic devices, documentation computerised devices and other equipment

GBP 439.99
1

Kennedy 7/32" HSS-Cobalt B/N KC3 Throwaway Cutter

Kennedy 7/32" HSS-Cobalt B/N KC3 Throwaway Cutter

Ball Nose - Inch. Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. *Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes. Inch Tolerances: Diameter: Over 1/16" ~ up to 1/4". Tolerance: +0.0005, -0.0013. Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated. TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity. TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

GBP 8.99
1

150x Kennedy 3MM HSS-Cobalt B/N KC3 Throwaway Cutter

150x Kennedy 3MM HSS-Cobalt B/N KC3 Throwaway Cutter

Ball Nose - Metric Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity. Suitable for slot drilling and end milling. Cutters are held in adaptors/chucks by the action of a set screw which locates on the shank flat giving quick and easy cutter change. *Except: 1mm cutters, 2mm and 1/16" ball nose cutters all of which have two flutes. Metric Tolerances: Diameter: Over 1.00 ~ up to 3.00. Tolerance: +0.013, -0.033. Diameter: Over 3.00 ~ up to 6.00. Tolerance: +0.020, -0.020. Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated. TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity. TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.

GBP 778.50
1