6 results (0,14516 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Makita GF600SE 2ND Fix Gas Nailer (2 x 1.5AH)

Makita GF600SE 2ND Fix Gas Nailer (2 x 1.5AH)

Makita GF600SE 2nd Fix Gas Nailer complete with 2 x BL7010 7.2Ah Batteries, DC07SA Charger and Carry Case The Makita GF600 is a gas driven cordless Brad nailer for 16Ga straight finish nails. Using a Lithium-ion 7.2 volt battery with a 30 minute charge time makes the Makita GF600SE four times quicker than the leading competitor. Featuring our LED low battery and error detection system, this machine will let you know when the power is going to run out. A shock absorbing battery fitting to protect the terminals is built in so the battery will not suffer vibration damage. Also has a quick release jam clearing system. Comes with a belt hook adaptable for right or left handed use. A happy customer who bought this said, "Real time saver. Excellent quality, high perfomance." Features: Best possible ergonomic handle for high maneuverability Nose tip designed to provide better visibility for quick and easy access to a desired driving point of workpiece LED job light illuminates workpiece brightly for efficient operation in dark place LED indication lamp with battery power warning and trouble detection functions for convenience in operation and repair Tool-less nail jam clearing Soft nose tip used to prevent marking the workpiece. Notched to help with alignment for accurate nailing Misfire inhibitor plate for smaller length nails Magazine window for easy confirmation on nail size in magazine Dual position hook convenient for hanging machine on rafters etc Ergonomic soft grip Depth adjustable Uses 7.2V Li-ion battery as power source for ignition spark, gas mixing, air intake/exhaust and supply of cooling air Comes With: 2 x 7.2v 1ah li-ion batteries Battery charger Safety goggles Hex wrench Carry case Specification: Nail Length/Gauge - 15-64mm/16Ga Work amount on a single battery charge - 4, 000 shots Work amount per fuel cell - 1, 000 shots Magazine Capacity - 100 Vibration K factor - 1.5 m/sec Vibration no load - 3.5 m/sec Net weight - 2.2kg

GBP 479.99
1

Makita GN900SE 7.2V First Fix Gas Nailer (2 X 1.5Ah Batteries)

Makita GN900SE 7.2V First Fix Gas Nailer (2 X 1.5Ah Batteries)

Makita GN900SE 7.2 Volt First Fix Gas Nailer complete with 2 batteries and carrying case. The Makita GN900 is a cordless clipped head framing nailer developed for a wide range of framing applications. High performance and hoseless it uses fuel gas (not supplied) as the power source to provide freedom from compressors. Makitas tried and tested Lithium-ion 7.2 volt battery system is capable of a full charge in 30 minutes. With LED low battery and error detection system, and a shock absorbing battery fitting to protect the terminals. The top of the machine is fitted with protective bumpers to protect workpiece and the nailer from knocks and scratches. This also doubles as a gripper to stop it sliding down inclined surfaces such as a sloping roof. Fitted with a dual position hook, handy for hanging from rafters or piping. Professional Builder Magazine said the GN900SE Nailer "Should reduce downtime in that it recharges 4 times faster and has the power to drive home 75mm long full ring nails and 90mm smooth nails. The nailer will deliver 1200 nails for each 80ml canister of gas and up to 4000 nails per battery charge. In timber frame applications the depth of the nail finish is dependent on the type of timber being used and can be adjusted to 5 different settings by a fingertip adjuster on the front of the machine." Features: Equipped with LED indication lamp with battery power warning and trouble detection functions for convenience of operation and repair Quick and easy loading system 7.2V Li-ion Battery allows lightweight design Chargeable in approximately 30 minutes Air filter protects cylinder from dirt and debris to prevent malfunction Gas cell chamber quick and easy load system Contact nose 5 stage depth adjustment and anti slip contact Comes With: 2 x Li-ion 7.2v 1Ah Batteries Charger Safety Glasses Carry Case Specification: Max Length: 50-90mm Gauge: 2.9 -3.3 Shots per Battery: 4, 000 Shots per gass cell: 1, 2000 Magazine Angle: 34 degrees Charging Time: 30 minutes Magazine Capacity: 44 Net Weight: 3.5kg 7.2 Volts

GBP 549.99
1

Makita GF600SE 2nd Fix Gas Nailer 15-64mm 7.2V 1 x 1.0Ah Li-ion MAKGF600SE

Makita GF600SE 2nd Fix Gas Nailer 15-64mm 7.2V 1 x 1.0Ah Li-ion MAKGF600SE

The Makita GF600SE 2nd Fix Gas Nailer 15-64mm is a gas driven cordless Brad nailer for 16Ga straight finish nails. This handy nailer is fitted with a slim nose to allow better visibility and manoeuvrability particularly in those tight spaces. For your convenience the nailer also comes with an LED job light to illuminate dark areas, and an ergonomically designed handle with rubberised soft grip to provide a comfortable grip therefore minimising hand fatigue and pain. This product also features a handy LED indication lamp for battery power warning and trouble detection functions for your convenience in operation and repair. The depth adjustable dial allows easy movement of the nose without the use of a wrench. The nailer also comes with a conveniently positioned hook for easy storage on rafters etc. The nailer is also equipped with a quick release tool-less nose to clear nail jams, along with a soft nose tip to prevent marking of the workpiece to ensure the perfect finish every time. A Magazine window is fitted for easy confirmation on nail size in magazine and a misfire inhibitor plate for smaller length nails. The nailer requires a 7.2V Li-ion battery as power source for ignition spark, gas mixing, air intake/exhaust and supply of cooling air. Supplied with hex wrench, case and goggles. Specification Nail Length/Gauge 15-64mm/16Ga. Magazine Capacity 100. Work Amount on a Single Battery Charge 4,000 Shots. Work Amount per Fuel Cell 1,000 Shots. Weight 2.2kg.

GBP 469.99
1

Makita DBN600ZJ 18V Finishing Nailer 16G LXT - Body Only Version - No Batteries Or Charger Supplied

Makita DBN600ZJ 18V Finishing Nailer 16G LXT - Body Only Version - No Batteries Or Charger Supplied

18V 16g 2nd fix finishing nailer designed for second fix carpenters, cabinet makers and joiners. The nailer takes 16 gauge 25 - 64mm straight brad nails. The magazine holds up to 110 brads at a time. Keep working for longer as the machine will fire up to 800 shots per battery charge (4.0Ah). The nail gun can be set to fire sequentially or in bump firing modes, selectable by an easily accessible rocker switch. LED job light makes it easier to work in low light levels. Features and Benefits: Driving depth adjustment by dial. Anti-dry fire mechanism. Sequential and bump firing modes selectable by rocker switch. Bumper protects work-piece from scratches and damage. LED job light. Tool-less nail jam clearing. Ergonomically designed grip. Window to check qty of remaining nails. For finishing applications

GBP 519.99
1

Makita DK0176G205 40Vmax Twin Pack 40V 2 x 2.5Ah Li-ion MAKDK0176G2

Makita DK0176G205 40Vmax Twin Pack 40V 2 x 2.5Ah Li-ion MAKDK0176G2

The Makita DK0176G205 40Vmax Twin Pack contains the following: 1 x 40V HP001G XGT 40Vmax Brushless Combi Drill with 2 mechanical gears, trigger controlled variable speed, and both forward and reverse rotation. A digital display provides visual confirmation of the selected torque. Provides excellent performance in continuous heavy-duty applications. Active Feedback Sensing Technology (AFT) : Shuts down the tool if the rotation speed suddenly slows down. Chuck: 13mm Keyless. No Load Speed: 0-650/0-2, 600/min. Impact Rate: 0-9, 750/0-39, 000/bpm. Torque: 68Nm/140Nm, Settings: 21/41. Capacity: Concrete/Metal 20mm, Wood 76mm. Weight: 3.0kg. 1 x 40V TD003G XGT 40Vmax Brushless Impact Driver with 4 modes of impact power selection: Max./Hard/Med./Soft for bolt) and 1 T-mode for thin metal only. The rubber grip on the handle ensures a good working grip. Bit Holder: 6.35mm (1/4in) . No Load Speed: 0-3, 700/3, 200/2, 100/1, 100/min. Impact Rate: 0-4, 100/3, 600/2, 600/1, 400/bpm. Max. Torque: 210/170/50/20Nm. Tightening Capacity: Standard Bolt M5 - M16. Also supplied with 2 x 40V 2.5Ah Li-ion XGT 40Vmax Batteries, 1 x DC40RA XGT Fast Li-ion Charger 240V and 1 x Type 3 MAKPAC Connector Case.

GBP 539.99
1

Makita LF1000 Flip Over Saw 1650W 240V MAKLF1000

Makita LF1000 Flip Over Saw 1650W 240V MAKLF1000

The Makita LF1000 Flip Over Saw is fitted with a lightweight and powerful motor which makes the conversion from mitre to table saw quick and easy whilst being able to cut tricky material and hard wood. The saw has a Soft-Start feature and maintains constant speed under load. For added safety it has a on-off switch with anti restart feature.The saw has a machined aluminium table for strength and accuracy, whilst the aluminium cast base gives superb rigidity. The fold away legs allow for easy transport in car or van. It is excellent for all aspects of site work, including 1st and 2nd fix. Supplied with a TCT blade, rip fence, bevel guide, push stick, blade guard, dust cover, dust bag and a wrench. Specifications: Input Power: 1,650W.No Load Speed: 2,700/min.Blade: 260 x 30mm Bore.Mitre Cut: @90: 68 x 155mm, @45: 50 x 140mm, @45 Left/Right: 68 x 95mm.Max. Table Cut: @90: 70mm, @45: 48mm.Accuracy: 1.5mm @ 12mtrs%.Max. Range: Mite: 45- 45, Bevel: 45- 0.Table Saw Blade Angle: 90- 45.Dimensions (LxWxH): 630 x 630 x 890mm. Weight : 36kg.The Makita LF1000 Flip Over Saw in the 240V Version.

GBP 999.99
1