sensitive book from GBP 660 | See the cheapest prices and offers on css.lazzaweb.dk

Norton Clipper CS451 E 14-18" Floor Saw - 415V

The Clipper CS451 E is a fully electric powered version (415V 3 phase) of this highly popular, low vibration, class leading floor saw. It is well-balanced, easy to manoeuvre and extremely user-friendly. Being electrically powered, it has a lower operating noise, does not exhaust hazardous fumes like its petrol or diesel powered counterparts and is therefore ideal for use indoors, confined spaces and in noise sensitive areas. The CS451E is easy to use, control and manoeuvre. Product refinements include an easy to read depth gauge and parking brake. The CS 451 is available in a choice of two petrol engines (Kohler or Honda) , diesel or 3-phase electric.

GBP 4999.99

1

Norton Clipper CM501 Major 18-20in - 110v

The Clipper CM501 masonry saw has been the original site workhorse since 1937. Not only does it lead its class, it is universally recognised as the industry benchmark for masonry and stone cutting saws, dominating building sites, educational institutions and industrial facilities alike around the world. When people think of brick saw, they invariably not only automatically think Clipper, they think the Clipper CM501 Major. This high-performance masonry and brick cutting saw is ideally suited for cutting a wide range of smaller and medium sized masonry materials, it is also perfect for cutting concrete products, building blocks, natural stones, roof tiles and refractories. It features both winding handle and foot pedal depth cutting control, which provides the operator with the flexibility of either fixed or step cutting materials, together with a stay level blade guard which provides excellent versatility of the work piece, whatever the elevation of the cutting head for improved operator safety. It is also conveniently equipped with a recirculating electric water pump, or can be alternatively direct to a mains water supply, providing users with the option of wet or dry cutting capability as required. The CM501-E is available with a choice of 110V, 230V or 415V electric motors. They are ideal for site and indoor use, as well as use in more noise-sensitive and poorly ventilated areas too. It is also available with a Honda petrol engine , which makes it more fully self-contained and therefore ideally suited for use on virgin sites and in remote locations with no access to a suitable electrical power supply, as well as other well-ventilated areas. The 110V CM501 is most commonly used for construction site use, whilst the 230V and 415V models more commonly used for fixed industrial applications The 415V CM501 is most commonly used for more continuous use in industrial applications. CM501 3.20.1 - Ideal for site use and in noise sensitive or poorly ventilated areas. Minimum 32A, 10kVA continuous supply. See our transformer guide for more info.

GBP 3999.99

1

Norton Clipper CPS41 16in Block Splitter - Manual

The Clipper CPS41 is a safe, strong, robust and easy to use high performance manual block splitter that quickly, easily and efficiently snaps paving blocks, masonry materials, concrete products and flat stone materials between 50 and 110mm. It has a reliable, proven, dependable design and manual operation where the manual force applied is greatly amplified by the combination of its extended handle and cam action, producing a very high splitting force which enables even the hardest brick and blocks to be split with ease - and with very little operating noise or mess, ideal for use in urban and noise sensitive areas. The particular design of the CPS 41 blockcutter is favoured by many professional installers as the bottom blade is pronounced which provides excellent visibility of the cutting line and allows product to be undercut for precise laying without uneven large gaps. The top beam is sprung loaded at either end for a more even distribution of exerted forces across the entire beam length. Both the top and bottom blades of the CPS are made from trembled, hardened steel blade for longer life. Adjusting cutting height is quick and easy thanks too, thanks to its conveniently centrally mounted large depth feed screw, reducing setup times.

GBP 659.99

1

Norton Clipper CS352B 12-14in Floor Saw - Battery

The Clipper CS352B is a compact, sturdy and highly-portable new-generation battery-powered floor saw with a smart, ergonomic, thoughtful, space-saving design and ultra-low Hand Arm Vibration (HAV) levels. It has a reliable cutting performance, even in heavy-duty cutting applications and is ideally suited for intermittent small road repair jobs, surface patching and pavement reinstatement works. It is designed for use with 12 and 14 diameter blades and features quick and easy winding handle cutting height adjustment and a 25 litre removeable water tank enabling it to be used for wet and dry cutting duties alike. Being battery-powered and fully self-contained with a noise-reduced operation, it is ideal for use in remote locations, indoors and outdoors, as well as in noise-sensitive and poorly ventilated areas too. The highly-agile and lightweight CS352B (only 75kgs excluding battery) is easy and comfortable to use. It is also additionally equipped with a lifting ring for added portability and ease of transport. It is powered by the same robust and highly-efficient Honda eGX motor and eco battery-system which is used by a multitude of construction equipment manufacturers to power their products as a more environmentally friendly alternative to petrol or diesel, meaning that the same Honda eGX 72V battery can also be used to power a variety of other compatible products for even greater utilisation. A fully charged battery will provide approx. 20 minutes of continuous cutting time +/-.

GBP 3999.99

1

Norton Clipper CM350B 14in Masonry Saw - Battery

The Clipper CM350B is a compact and durable new-generation battery-powered masonry saw with a smart ergonomic design and a reliable cutting performance, even in heavy-duty cutting applications. It is designed for use with 14 diameter blades and is supplied with a plunging cutting head and built-in heavy-duty recirculating mechanical water pump, together with an optimised material height which makes it suitable for step-cutting a wide variety of refractory products, masonry materials and concrete products, wet or dry. The CM350B is also equipped with adjustable folding legs and transport wheels for added portability to and around the jobsite. Being fully battery-powered, the CM 350B is particularly well suited for use indoors, outdoors, in noise-sensitive and poorly areas, as well as remote locations, with no access to a power source. The brushless Honda motor guarantees consistent high-performance, coupled with the convenience of being maintenance-free. It is powered by the same robust and highly-efficient Honda eGX motor and eco battery-system which is used by a multitude of construction equipment manufacturers to power their products as a more environmentally friendly alternative to petrol or diesel, meaning that the same Honda eGX 72V battery can also be used to power a variety of other compatible products for even greater utilisation. A fully charged battery will provide up to 15 minutes of continuous cutting time, sufficient enough to cut up to 60, 300 x 40mm concrete floor pavers.

GBP 4999.99

1

Norton Clipper CS7, 5 E 32" Floor Saw - 415V

The Clipper CS7, 5 E is a professional electrically-powered (415V 3 phase) , low noise, emission-free large capacity floor saw with a 800mm/32 blade capacity, which is suitable for a wide variety of indoor and outdoor uses. This compact, lightweight, highly-portable, user-friendly, easy to use and environmentally friendly deep-cutting solution features a very generous cutting depth of up to 320mm/13 deep and is ideally suited for sawing floors in commercial and industrial buildings alike, as well as use in noise and pollution sensitive areas, as it is significantly quieter in operation than petrol or diesel counterparts and does not exhaust hazardous fumes either. Despite its impressive maximum cutting depth and deep cutting performance, the CS7.5E is surprisingly compact, agile and easy to use, manoeuvre, transport and store; with a conveniently removeable motor which transportation even easier. It also has low HAV levels, which makes it comfortable to use and furthermore enables it to be used safely for extended periods of operation and features a tough, heavy-duty steel frame that is built to last. The compact size of the CS7.5E (580mm) means that it is able to pass freely through doorways and be used in confined spaces, which are simply off-limits to larger petrol or diesel powered saws. The versatility of the Clipper CS7.5E is further broadened thanks to its left-and-right side cutting capabilities, adjustable handles, a convenient handle for easy cutting depth control and a water hose connector for easy connection to a suitable water supply.

GBP 14999.99

1

Norton Clipper CM501 Major 18-20in - 415v

The Clipper CM501 masonry saw has been the original site workhorse since 1937. Not only does it lead its class, it is universally recognised as the industry benchmark for masonry and stone cutting saws, dominating building sites, educational institutions and industrial facilities alike around the world. When people think of brick saw, they invariably not only automatically think Clipper, they think the Clipper CM501 Major. This high-performance masonry and brick cutting saw is ideally suited for cutting a wide range of smaller and medium sized masonry materials, it is also perfect for cutting concrete products, building blocks, natural stones, roof tiles and refractories. It features both winding handle and foot pedal depth cutting control, which provides the operator with the flexibility of either fixed or step cutting materials, together with a stay level blade guard which provides excellent versatility of the work piece, whatever the elevation of the cutting head for improved operator safety. It is also conveniently equipped with a recirculating electric water pump, or can be alternatively direct to a mains water supply, providing users with the option of wet or dry cutting capability as required. The CM501-E is available with a choice of 110V, 230V or 415V electric motors. They are ideal for site and indoor use, as well as use in more noise-sensitive and poorly ventilated areas too. It is also available with a Honda petrol engine , which makes it more fully self-contained and therefore ideally suited for use on virgin sites and in remote locations with no access to a suitable electrical power supply, as well as other well-ventilated areas. The 110V CM501 is most commonly used for construction site use, whilst the 230V and 415V models more commonly used for fixed industrial applications The 415V CM501 is most commonly used for more continuous use in industrial applications. CM501 3.55.3 - Ideal for static, more prolonged use and more forgiving than single phase. 32A 3-phase supply.

GBP 4399.99

1

Norton Clipper CM501 Major 18-20in - 230v

The Clipper CM501 masonry saw has been the original site workhorse since 1937. Not only does it lead its class, it is universally recognised as the industry benchmark for masonry and stone cutting saws, dominating building sites, educational institutions and industrial facilities alike around the world. When people think of brick saw, they invariably not only automatically think Clipper, they think the Clipper CM501 Major. This high-performance masonry and brick cutting saw is ideally suited for cutting a wide range of smaller and medium sized masonry materials, it is also perfect for cutting concrete products, building blocks, natural stones, roof tiles and refractories. It features both winding handle and foot pedal depth cutting control, which provides the operator with the flexibility of either fixed or step cutting materials, together with a stay level blade guard which provides excellent versatility of the work piece, whatever the elevation of the cutting head for improved operator safety. It is also conveniently equipped with a recirculating electric water pump, or can be alternatively direct to a mains water supply, providing users with the option of wet or dry cutting capability as required. The CM501-E is available with a choice of 110V, 230V or 415V electric motors. They are ideal for site and indoor use, as well as use in more noise-sensitive and poorly ventilated areas too. It is also available with a Honda petrol engine , which makes it more fully self-contained and therefore ideally suited for use on virgin sites and in remote locations with no access to a suitable electrical power supply, as well as other well-ventilated areas. The 110V CM501 is most commonly used for construction site use, whilst the 230V and 415V models more commonly used for fixed industrial applications The 415V CM501 is most commonly used for more continuous use in industrial applications. CM501 3.55.1 - Ideal for static, more prolonged use. 16A direct supply.

GBP 4499.99

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)