270 results (0,16377 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Notifier Honeywell SCU System Communication Unit 583381.31

Notifier Honeywell SCU System Communication Unit 583381.31

Notifier Honeywell SCU System Communication Unit 583381.31The System Communications Unit serves as a digital audio memory for the VARIODYN D1 system. It is possible to record and playback multiple audio data streams simultaneously. The connection to the other VARIODYN D1 modules is made via the Ethernet and is permanently monitored. The audio storage for critical evacuation alerts and notifications is done in accordance with IEC EN 60849 in a non-volatile flash memory. Depending on the format storage capacity is approx two hours.Additional prerecorded audio messages such as announcements signals or commercial texts are stored on a hard disk. Depending on the format storage capacity here is approx. 1000 hours. The SCU can also be used for the logging and recording of announcements. These are also stored in the memory and logged with date time and activation details. The automatic buffer makes it possible to transmit announcements that cannot be played to all targets as soon as these targets become available.ConnectionsEthernet connection 100 MbitsNetwork connection24 V DC emergency inputDisplaysPOWER-LED HARDDISK-LEDERROR-LED STAND-ALONE-LEDKey FeaturesEN 54-16 certifiedDigital audio memory for VARIODYND1Networkable via EthernetCan be used for the logging and recording of announcementsAutomatic buffer and repetition of interrupted announcements24 V DC emergency power supply

GBP 4859.09
1

Notifier 020-573 IDR-M Mimic Control PCA Kit

Notifier 020-573 IDR-M Mimic Control PCA Kit

Notifier 020-573 IDR-M Mimic Control PCA KitThe IDR-M Mimic Driver is part of a versatile system where mimic displays are required in association with Notifier fire control panels. Common fire fault test and disablement outputs and power OK outputs can be configured in addition to a key switch input to enable evacuate silence lamp test mute and reset inputs.The IDR-M Control and Termination kit comprises a Control board and a Termination board co-located on one metal chassis. The Control board contains the processor and memory and the Termination board allows connection of power RS485 and other external signals. The Control board communicates with up to eight Mimic Driver boards.

GBP 565.40
1

Notifier 020-574 IDR-MD Mimic Driver amp Termination Board PCA Kit

Notifier 020-574 IDR-MD Mimic Driver amp Termination Board PCA Kit

Notifier 020-574 IDR-MD Mimic Driver Termination Board PCA KitThe IDR-M Mimic Driver is part of a versatile system where mimic displays are required in association with Notifier fire control panels. Common fire fault test and disablement outputs and power OK outputs can be configured in addition to a key switch input to enable evacuate silence lamp test mute and reset inputs.The IDR-M Control and Termination kit comprises a Control board and a Termination board co-located on one metal chassis. The Control board contains the processor and memory and the Termination board allows connection of power RS485 and other external signals. The Control board communicates with up to eight Mimic Driver boards.

GBP 903.67
1

Notifier Honeywell ETCS Ethernet Touchscreen Call Station 583527

Notifier Honeywell ETCS Ethernet Touchscreen Call Station 583527

Notifier Honeywell ETCS Ethernet Touchscreen Call Station 583527ETCS adopts 7 touch screen for display and operation which provides a user-friendly interface. 4 bi-colour LEDs are used for status indications which include microphone fault indication system fault indication and connection states of two redundant cables. A red button with cover can be configured for emergency announcement.The gooseneck microphone is replaceable and monitored by ETCS. The loudspeaker can be used for pre-listening audio locally and intercom between the call stations. ETCS is prepared for redundant cable connection to the Ethernet network. It can be powered by PoE devices through the Ethernet cable or with a power adapter. USB stick can be connected to ETCS to make it easy to play external audio files. ETCS provides an external audio input and output which can be used for connecting audio devices such as CD players. If more keys andor LEDs are needed it is possible to add up to three digital key modules DKM plus 583526.ETCS can monitor the microphone and cables permanently. It can also be monitored and configured via the network. It supports multi-language display and the languages can be switched dynamically without resetting the device. It also supports playback the recent call quickly. There are three types of user permissions which can provide different layouts and operations for each user. Up to 27 h. speech or audio can be saved and played locally. Two icons are used to indicate if there is any call been activated or system fault been occurred. Active call list system fault list and recent call list can easily be checked in any page.ETCS supports manual calls or pre-defined calls or schedule calls as home page. For manual calls after selecting the target zones andor groups four different audio sources can be selected which include USB stick audio local storage audio network audio and live announcement. For pre-defined calls when the call is activated it will directly play pre-recorded messages on target zonesgroups which are all configured in advance by configuration tool. The call volume can be adjusted during the calls. For schedule calls after configuring the call parameters and playback time it will directly start at the specified time.Key Features7 touch screen and user friendly interface4 bi-colour LEDs for status indicationA red button with cover for emergency announcementReplaceable electret gooseneck microphone with uni-directional patternLoudspeaker for pre-listening audio locally and intercom between the call stations ETCS and DCS seriesHigh failure safety due to redundant transmission routeNetwork cable via EthernetPowered by PoE devices or external power adapterUSB stick can be connected to play audio filesAdditional audio inputoutput for audio devicesMax 3 key modules DKM plus which has 18 keys and 18 LEDs each can be extendedPermanent monitoring of the microphone and cablesRemote monitoring and configuration via the networkSupport multi-language displayThree types of user permissions for different layouts and operationsSpeech or audio memory up to 27 h.Active call list system fault list and recent call list can easily be checked in any pageSupport manual calls pre-defined calls and schedule calls which can be set as home pageVolume can be adjusted during the calls

GBP 2754.02
1

Notifier Honeywell ABT-M01 Microphone

Notifier Honeywell ABT-M01 Microphone

Notifier Honeywell ABT-M01 MicrophoneThe ABT-M01 microphone is an affordable fully analog device. It is equipped with a built in gong generated onboard the device accessible through the switch on the back panel. The gong as well as the microphone itself has an individual volume control knob also placed on the back panel of the device.To operate the device press the MIC ON button the status LED will switch to steady green light. In the event of an active built in gong the status LED will turn green once the gong has ended. When finished transmitting the message release the MIC ON button to deactivate the gooseneck mic.

GBP 402.90
1

Notifier IDR-6A Active Repeater Panel For ID3000 System Only

Notifier IDR-6A Active Repeater Panel For ID3000 System Only

Notifier IDR-6A Active Repeater Panel For ID3000 System OnlyThe IDR-6A active repeater panel combines a compact design with a 240 x 64 pixel graphic backlit LCD and system control pushbuttons. The large LCD replicates the display on the ID3000 panel and utilises the same simple menu-driven user interface as the ID3000 panel. The control buttons and navigation keys on the repeater provide the operator with the ability to navigate through menu options and event displays. Furthermore it allows the user to remotely reset the system accept events silence sounders re-sound sounders and initiate evacuation and to run diagnostics tests on the repeater.For added security a key switch on the front of the repeater enablesdisables certain pushbuttons. The nine LED indicators provide a quick summary of the general system status for the user. The compact design makes it very easy to install and commission the IDR Series repeaters. The repeaters event log can store up to 150 most recent events this also aids commissioning.Key Features Quickly identify the location of a fire related incidentDesigned to comply with EN54 Part 2Simple connection to ID panelsActive Passive optionsPower diagnosticsPush button testLanguage optionsWindows based off-line configuration tool

GBP 1014.00
1

Notifier DSS-PC-I02 Loop-Powered EN54-23 Open Category Detector Base Sounder Strobe - Red Flash cw Isolator

Notifier DSS-PC-I02 Loop-Powered EN54-23 Open Category Detector Base Sounder Strobe - Red Flash cw Isolator

Notifier DSS-PC-I02 Loop-Powered EN54-23 Open Category Detector Base Sounder Strobe - Red Flash cw IsolatorFeaturing fast and simple installation and control the Opal base sounderVisual Alarm Device VAD forms the perfect base for Notifier Opal detectors. Powered by the fire panel via the loop wiring control of the devices is enabled using on-board switches or via the Opal digital protocol using the control panel. The range is installed simply by a twist fit onto the B501AP base.Key FeaturesEN54-23Clear Lens with Red FlashWhite Body

GBP 75.25
1

Notifier IDR2-A Active Repeater Panel For ID50 ID60 amp ID2000

Notifier IDR2-A Active Repeater Panel For ID50 ID60 amp ID2000

Notifier IDR2-A Active Repeater Panel For ID50 ID60 ID2000The IDR-2A active repeater will repeat the LCD LED indications on the main fire alarm panel and allow the operator to command the system using system control pushbuttons Mute Buzzer Accept Evacuate Silence Sounders Resound Sounders and Reset. Furthermore the IDR-2A has configuration and test functions such as edit Normal message Lamp Test LCD Test Buzzer Test and a Pushbutton Test option.For added security a key-switch on the front of the repeater enablesdisables certain push buttons. The nine LED indicators provide a quick summary of the general system status for the user. The compact design makes it very easy to install and commission the IDR Series repeaters. The repeaters event log can store up to 150 most recent events this also aids commissioning.Key FeaturesQuickly identify the location of a fire related incidentDesigned to comply with EN54 Part 2Simple connection to ID panelsActive Passive optionsPower diagnosticsPush button testLanguage optionsWindows based off-line configuration tool

GBP 855.82
1

Notifier IDR-6A Active Repeater Panel Stainless Steel 002-466

Notifier IDR-6A Active Repeater Panel Stainless Steel 002-466

Notifier IDR-6A Active Repeater Panel Stainless Steel 002-466The IDR-2A active repeater will repeat the LCD LED indications on the main fire alarm panel and allow the operator to command the system using system control pushbuttons Mute Buzzer Accept Evacuate Silence Sounders Resound Sounders and Reset. Furthermore the IDR-2A has configuration and test functions such as edit Normal message Lamp Test LCD Test Buzzer Test and a Pushbutton Test option.For added security a key-switch on the front of the repeater enablesdisables certain push buttons. The nine LED indicators provide a quick summary of the general system status for the user. The compact design makes it very easy to install and commission the IDR Series repeaters. The repeaters event log can store up to 150 most recent events this also aids commissioning.Key FeaturesQuickly identify the location of a fire related incidentDesigned to comply with EN54 Part 2Simple connection to ID panelsActive Passive optionsPower diagnosticsPush button testLanguage optionsWindows based off-line configuration tool

GBP 1451.23
1

Notifier Round 5 inch Ceiling Loudspeaker LSC-506

Notifier Round 5 inch Ceiling Loudspeaker LSC-506

Notifier Round 5 inch Ceiling Loudspeaker LSC-506All Notifier loudspeakers have built in protection to ensure that any damage to the loudspeakers does not result in a failure of the loudspeaker circuit so the integrity of the system is maintained for alert or instruction messages to still be delivered from loudspeakers on the same circuit in other areas. This ensures full compliance to BS5839 part 8.The loudspeakers are easily installed using the mounting spring on the unit and the fire dome then slides into place. The unique flying lead wiring arrangement in our loudspeakers makes their installation very easy. The loudspeakers are equipped with ceramic terminal blocks a thermal fuse and heat resistant high temperature wiring to comply with EN54 part 24.

GBP 47.86
1

Notifier Honeywell EOL End of Line Module 583496

Notifier Honeywell EOL End of Line Module 583496

Notifier Honeywell EOL End of Line Module 583496End-of-line module for the end of the VARIODYN D1 voice alarm system loudspeaker line for standard-compliant monitoring when more than 20 loudspeakers are connected to a line. The module is connected to the final loudspeaker at the end of the line. Independent of the number and the output of the connected loudspeakers.Key FeaturesApproved as per EN 54-16Standard monitoringFinal element for 100 V of loudspeaker line in 2-wire technologyDifferent connection possibilities for optimum line adaptation 3 connectionsThe module is sealed and has therefore an optimum humidity protection

GBP 71.39
1

Notifier NFX-SMT3-IV Photo Thermal amp Infrared Multi-Criteria Detector - Ivory

Notifier NFX-SMT3-IV Photo Thermal amp Infrared Multi-Criteria Detector - Ivory

Notifier NFX-SMT3-IV Photo Thermal Infrared Multi-Criteria Detector - IvoryThe Opal multi-criteria multi-sensor photo thermal and infra-red SMART3 detector is the environmentally friendly alternative to the ionisation detector a technology that is now over sixty years old. The SMART3 offers comparable speed of response to the ionisation technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires. SMART3 moves the goal posts in the fight against false alarms by delivering enhanced false alarm immunity.In addition to being an effective alternative to ionisation units SMART3 offers better performance over the alternative technologies of dual angle or dual wavelength optical detectors and photo-thermal detectors. The integration of continual monitoring for all three major elements of a fire enables the SMART3 to respond far more quickly to an actual fire and has the highest immunity to nuisances. Based upon the sensor signals the program dynamically changes sensor thresholds sensor gain time delays combination sampling rates averaging rates and if any sensor fails changing sensitivity of the remaining sensors as well as indicating a fault condition.The sensing elements of the SMART3 are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detector has built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key Features Built in short circuit isolation New advanced Opal protocol allows mapping of the loop for precise fault location using isolators Tri colour LED offering red green and amber colours Rotary decade address switches Pure white colour to complement modern buildings 100 mechanical and electrical backwards compatibility Base designed to ease installation and wiring

GBP 157.37
1

Notifier NFXI-SMT3 Photo Thermal amp Infrared Multi-Criteria Detector - White

Notifier NFXI-SMT3 Photo Thermal amp Infrared Multi-Criteria Detector - White

Notifier NFXI-SMT3 Photo Thermal Infrared Multi-Criteria DetectorThe Opal multi-criteria multi-sensor photo thermal and infrared SMART3 detector is the environmentally friendly alternative to the ionisation detector a technology that is now over sixty years old. The SMART3 offers comparable speed of response to the ionisation technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires. SMART3 moves the goal posts in the fight against false alarms by delivering enhanced false alarm immunity.In addition to being an effective alternative to ionisation units SMART3 offers better performance over the alternative technologies of dual angle or dual wavelength optical detectors and photo-thermal detectors. The integration of continual monitoring for all three major elements of a fire enables the SMART3 to respond far more quickly to an actual fire and has the highest immunity to nuisances. Based upon the sensor signals the program dynamically changes sensor thresholds sensor gain time delays combination sampling rates averaging rates and if any sensor fails changing sensitivity of the remaining sensors as well as indicating a fault condition.The sensing elements of the SMART3 are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detector has built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key FeaturesBuilt in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 89.23
1

Notifier Honeywell 6 Watt Ceiling Speaker For Shallow Ceiling Voids 582407.SAFE

Notifier Honeywell 6 Watt Ceiling Speaker For Shallow Ceiling Voids 582407.SAFE

Notifier Honeywell 6 Watt Ceiling Speaker For Shallow Ceiling Voids 582407.SAFEThis new type DL-E 06-130T-EN 54. SAFE Part 24 certified metal ceiling mount loudspeaker visually blends well into the ceiling due to its flat design. SAFE variant has ceramic connector clamp and thermal fuse that is already mounted at the factory. The moisture impregnated 5- broad band loudspeaker chassis is characterized by a high efficiency. The adaptation 6 W 3 W or 1.5 W is implemented in the usual form on the loudspeaker. The spring-loaded connector two pieces guarantees a simple and quick installation in the ceiling. By default a plastic protective cover is installed on the back of the loudspeaker but EN 54-24 certified fire dome is optionally available as well 582407.FD. This is required to mount SAFE in the projects which require the usage as per BS 5839-8.

GBP 95.50
1

Notifier NFXI-BEAM Loop Powered Beam Detector

Notifier NFXI-BEAM Loop Powered Beam Detector

Notifier NFXI-BEAM Loop Powered Beam DetectorThe Opal addressable beam detector is an intelligent reflector type linear optical beam smoke detector designed to operate with Notifier addressable fire alarm systems. It operates primarily on the principle of light obscuration utilising infra-red light. The Infra-Red transmitter generates a beam of light towards a high efficiency reflect. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.Key Features5 100m operating range designed for the protection of buildings such as shopping centres heritage buildings warehouses and other structures with large open spacesEasy set-up and calibration with visual aids for both coarse and fine adjustmentLoop powered with built in isolation for system mappingUtilizes the advanced Opal digital protocol whilst remaining backward compatible with existing Notifier systemThe NFXI-BEAM-T Beam Detector features a unique remote test capability that fully tests both the optics and the electronics of the device. This means theres no need to hire a platform to give high level access to the device in testing.Two automatically variable sensitivity modes compensate for short term environmental changesAutomatic drift compensation compensates for long term sensitivity changes caused by environmental factorsFour fixed sensitivity level

GBP 878.53
1

Notifier W5A-RP02SG-N026-01 IP67 Waterproof Addressable Call Point With Isolator

Notifier W5A-RP02SG-N026-01 IP67 Waterproof Addressable Call Point With Isolator

Notifier M700WCP-RISG IP67 Waterproof Addressable Call Point With Isolator W5A-RP02SG-N026-01Designed to provide a manual alarm interface to NOTIFIERs fire alarm control panel. Installation efficiency flexibility and compliance with the latest standards are at the heart of the call point range.The unique plug and play concept is designed specifically to reduce installation time by using a terminal block which can be wired during the initial installation cabling with a link P102 to provide continuity for testing. During the commissioning phase the links are removed and the terminal block is simply inserted into the connector at the back of the unit. No re-termination is required. Both break glass supplied and resettable operating elements PS230 can be used in the standard unit.Operation of the re-settable element as well as being indicated by the units LED is also indicated by a yellow strip on the element which becomes visible when activated. With the addition of a hinged transparent cover PS200 the element may be protected against accidental operation and may be further protected by using a cover seal PS056 which requires breaking in order to operate the unit.Key FeaturesUnique Plug Play installation conceptRe-settable operating element optionAnalogue addressable communicationsSemi-Flush or surface mountingFully compliant with EN54 Part 11Backward compatibilityEnhanced aestheticsIntegral LEDIntegral loop isolation option

GBP 257.96
1

Notifier M701E Analogue Addressable Single Output Control Module

Notifier M701E Analogue Addressable Single Output Control Module

Notifier M701E Analogue Addressable Single Output Control ModuleThe M701E is designed for use with any Notifier protocol fire alarm control panel.The M701E optionally supervises the wiring to the load devices and upon command from the control panel switches an external power supply to operate these devices.Comes complete with end of line resistor plug-in screw connections direct decade address entry tri-colour LEDs and Isolator.The newly designed platform of M700 family of InputOutput modules completes the NFXI line of wired spot detectors with unaltered family feeling and undisputed continuity.The new M700 look and feel combine maximum reliability with top-end functionality all enriched by a cutting-edge modern design.Single and multi-way models are available within the renewed mechanical package reducing both the cost of installation and the mounting space required.Their unique mechanical design allows each module to be mounted in either a common wall box on a DIN rail or its dedicated enclosure. The DIN rail mounting option is possible thanks to smart DIN brackets directly built-in the enclosure. Irrespective of the mounting methods chosen the address switch is always visible and accessible for selection.Each module has built-in short circuit protection for the communications loop however to increase application flexibility the isolators can be selecteddeselected on an individual module basis.To help technicians in the maintenance and fault-finding process light pipes have been enlarged to increase visibility even in the most challenging space constrained application. Both the status LED and the rotary switch selection can be viewed on the two sides without having to remove the cover of the surface mounting box.The multi-colour status LED provide diagnostic information regarding the status of each individual inputoutput. For ease of installation testing and maintenance modules have been equipped with quick connectors. The renovated aesthetics offers data finely engraved on the enclosures surface by laser for lifetime durability and resistance to degradation.The M701E optionally supervises the wiring to the load devices and upon command from the control panel switches an external power supply to operate these devices.Comes complete with end of line resistor plug-in screw connections direct decade address entry tri-colour LEDs and Isolator.

GBP 81.12
1

Notifier M720E Analogue Addressable Dual Input Monitor Module

Notifier M720E Analogue Addressable Dual Input Monitor Module

Notifier M720E Analogue Addressable Dual Input Monitor ModuleThe M702E is designed for use with any Notifier protocol fire alarm control panel.Comes complete with end of line resistors plug-in screw connections direct decade address entry and tri-colour LEDs complete with Isolator..The newly designed platform of M700 family of InputOutput modules completes the NFXI line of wired spot detectors with unaltered family feeling and undisputed continuity.The new M700 look and feel combine maximum reliability with top-end functionality all enriched by a cutting-edge modern design.Single and multi-way models are available within the renewed mechanical package reducing both the cost of installation and the mounting space required.Their unique mechanical design allows each module to be mounted in either a common wall box on a DIN rail or its dedicated enclosure. The DIN rail mounting option is possible thanks to smart DIN brackets directly built-in the enclosure. Irrespective of the mounting methods chosen the address switch is always visible and accessible for selection.Each module has built-in short circuit protection for the communications loop however to increase application flexibility the isolators can be selecteddeselected on an individual module basis.To help technicians in the maintenance and fault-finding process light pipes have been enlarged to increase visibility even in the most challenging space constrained application. Both the status LED and the rotary switch selection can be viewed on the two sides without having to remove the cover of the surface mounting box.The multi-colour status LED provide diagnostic information regarding the status of each individual inputoutput. For ease of installation testing and maintenance modules have been equipped with quick connectors. The renovated aesthetics offers data finely engraved on the enclosures surface by laser for lifetime durability and resistance to degradation.

GBP 108.70
1