313 results (0,16764 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Notifier NFXI-TDIFF A1R Rate Of Rise amp Fixed Heat Detector - White

Notifier NFXI-TDIFF A1R Rate Of Rise amp Fixed Heat Detector - White

Notifier NFXI-TDIFF A1R Rate Of Rise Fixed Heat DetectorThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key FeaturesBuilt in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 55.16
1

Notifier NFXI-TDIFF-BK A1R Rate Of Rise amp Fixed Heat Detector - Black

Notifier NFXI-TDIFF-BK A1R Rate Of Rise amp Fixed Heat Detector - Black

Notifier NFXI-TDIFF-BK A1R Rate Of Rise Fixed Heat Detector - BlackThis is the Black Version of the NFXI-TDIFF.The Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device.For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers. The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key FeaturesBuilt in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 85.99
1

Notifier Agile Wireless Rate of Rise Heat Detector NRX-TDIFF

Notifier Agile Wireless Rate of Rise Heat Detector NRX-TDIFF

Notifier Agile Wireless Rate of Rise Heat Detector NRX-TDIFFAgile Rate of Rise Heat Detector. Wireless Rate of Rise heat detector for the Notifier Agile wireless system. Powered by 4 x CR123A 3v batteriesAbout AgileThe Agile Wireless Fire Detection and Alarm System is a platform of wireless fire devices suitable for all applications where wired fire devices cannot be installed for economic or aesthetic reasons. The look and feel of our wired fire devices combined with cutting edge wireless mesh network technology delivers superior performance when compared to traditional wireless star network technologies.Agile FeaturesMesh multiple communication paths for increased reliability18RF channels at 868MHz - provides greater tolerance to interference2 integrated antennas on each wireless fire device easier positioning of devicesUp to 400 m free air communication range providing good coverage levelsAverage 5 year battery service life reducing maintenance requirementsAddresses set using rotary switches reduced commissioning timeTamper-resist locking mechanism to prevent unauthorised removal of sensor headWired fire devices look and feel easier installation and visual integrationPatented battery service life prediction feature more proactive maintenancePeace of mind - battery redundancy delivering always on performanceLoop powered Gateway reduced installation cost and timeUp to 8 Gateways per loopUp to 32 Wireless devices per GatewayAgile IQ 3-in-1 software for easy design configuration and diagnosticsHighly adaptive and flexible features that effectively meet the needs of diverse applications from mainstream to more challenging sites.

GBP 232.81
1

Notifier NFX-TDIFF-IV A1R Rate Of Rise amp Fixed Heat Detector - Ivory

Notifier NFX-TDIFF-IV A1R Rate Of Rise amp Fixed Heat Detector - Ivory

Notifier NFX-TDIFF-IV A1R Rate Of Rise Fixed Heat Detector - IvoryThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key Features Built in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 94.10
1

Notifier FD-851REA Conventional Rate Of Rise Heat Detector

Notifier FD-851REA Conventional Rate Of Rise Heat Detector

Notifier FD-851REA Conventional Rate Of Rise Heat DetectorThe FD-851RE thermal detector incorporates the latest in thermal element technology the detector provides efficient and accurate detection of fires especially in environments such as boiler houses or kitchens where smoke detectors are inappropriate due to the high level of airborne contamination. A variety of detector bases are available providing compatibility with a wide range of Fire Alarm Control Panels making it ideal for expansions and retrofit applications.The remote hand-held programming tool can also be used in conjunction with the PhD series of detectors to gain access to other enhanced features. The features available include readwrite last maintenance date read chamber contamination level read value of thermal element and perform an alarm test.Key FeaturesAutomatic drift compensationProgrammable SensitivityAdvanced maintenance features via remote hand-held test unitLow profile designLow current drawWide operating voltage 8 to 30VDCBi-colour LED detector status indicatorAddressable alarm location featureApproved to EN54 part 7 20003 Year warranty

GBP 36.42
1

Notifier Honeywell EOL End of Line Module 583496

Notifier Honeywell EOL End of Line Module 583496

Notifier Honeywell EOL End of Line Module 583496End-of-line module for the end of the VARIODYN D1 voice alarm system loudspeaker line for standard-compliant monitoring when more than 20 loudspeakers are connected to a line. The module is connected to the final loudspeaker at the end of the line. Independent of the number and the output of the connected loudspeakers.Key FeaturesApproved as per EN 54-16Standard monitoringFinal element for 100 V of loudspeaker line in 2-wire technologyDifferent connection possibilities for optimum line adaptation 3 connectionsThe module is sealed and has therefore an optimum humidity protection

GBP 71.39
1

Notifier M721E Analogue Addressable Dual Input Monitor and Single Output Relay Module

Notifier M721E Analogue Addressable Dual Input Monitor and Single Output Relay Module

Notifier M721E Analogue Addressable Dual Input Monitor and Single Output Relay ModuleThe M721E is designed for use with any Notifier protocol fire alarm control panel.Comes complete with end of line resistors plug-in screw connections direct decade address entry and tri-colour LEDs complete with Isolator.The newly designed platform of M700 family of InputOutput modules completes the NFXI line of wired spot detectors with unaltered family feeling and undisputed continuity.The new M700 look and feel combine maximum reliability with top-end functionality all enriched by a cutting-edge modern design.Single and multi-way models are available within the renewed mechanical package reducing both the cost of installation and the mounting space required.Their unique mechanical design allows each module to be mounted in either a common wall box on a DIN rail or its dedicated enclosure. The DIN rail mounting option is possible thanks to smart DIN brackets directly built-in the enclosure. Irrespective of the mounting methods chosen the address switch is always visible and accessible for selection.Each module has built-in short circuit protection for the communications loop however to increase application flexibility the isolators can be selecteddeselected on an individual module basis.To help technicians in the maintenance and fault-finding process light pipes have been enlarged to increase visibility even in the most challenging space constrained application. Both the status LED and the rotary switch selection can be viewed on the two sides without having to remove the cover of the surface mounting box.The multi-colour status LED provide diagnostic information regarding the status of each individual inputoutput. For ease of installation testing and maintenance modules have been equipped with quick connectors. The renovated aesthetics offers data finely engraved on the enclosures surface by laser for lifetime durability and resistance to degradation.

GBP 150.07
1

Notifier NFX-TFIX58-IV Fixed Temperature 58 Deg. Heat Detector - Ivory

Notifier NFX-TFIX58-IV Fixed Temperature 58 Deg. Heat Detector - Ivory

Notifier NFX-TFIX58-IV Fixed Temperature 58 Deg. Heat Detector - IvoryThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device.For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers. The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key FeaturesBuilt in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 97.34
1

Notifier Fixed Temperature 78 Deg. Heat Detector - NFX-TFIX78-IV - Ivory

Notifier Fixed Temperature 78 Deg. Heat Detector - NFX-TFIX78-IV - Ivory

Notifier Fixed Temperature 78 Deg. Heat Detector - NFX-TFIX78-IV - IvoryThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key Features Built in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 97.34
1

Notifier Fixed Temperature 58 Deg. Heat Detector NFXI-TFIX58 - White

Notifier Fixed Temperature 58 Deg. Heat Detector NFXI-TFIX58 - White

Notifier Fixed Temperature 58 Deg. Heat DetectorThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key Features Built in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 58.40
1

Notifier Fixed Temperature 78 Deg. Heat Detector NFXI-TFIX78 - White

Notifier Fixed Temperature 78 Deg. Heat Detector NFXI-TFIX78 - White

Notifier Fixed Temperature 78 Deg. Heat DetectorThe Opal NFXI-TFIX58 NFXI-TFIX78 are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58C Class A1S to 78C Class BS.The Opal NFXI-TDIFF uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10Cminute typical or if the temperature exceeds a threshold of 58C Response Class A1R. Notifiers Opal protocol allows it to be software configured to be either a fixed 58C a fixed 78C unit or a 58C with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Opal Protocol so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detectors have built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key FeaturesBuilt in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 58.40
1

Notifier Honeywell ABT-EOL End of Line Supervision Module

Notifier Honeywell ABT-EOL End of Line Supervision Module

Notifier Honeywell ABT-EOL End of Line Supervision ModuleABT-EOL monitors the integrity of a loudspeaker line and all its branches. Supervision of branched lines requires EOL module for each branch. ABT-EOL provides a filtered load exclusively at the pilot tone frequency and increases reliability of loudspeaker surveillance method based on impedance measurement. Module connects in parallel to the last loudspeaker on a line. It has a 4 different modes which has to be selected according to the results calculated by the EOL calculator.DetailsEN 54-16 certifiedFour power settings ABCDFits on built-in mounts on selected ambient system loudspeakersPowering of the module from the amplifierLoudspeaker line monitoring without additional cablingOpen-circuit short and ground leakage detection

GBP 1057.26
1

Notifier ID3000 6 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-734

Notifier ID3000 6 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-734

Notifier ID3000 6 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-734The Notifier ID3000 family of fire alarm control panels deliver the power and flexibility to meet the even the most demanding of requirements. From 2 to 8 loops in a single ID3000 panel to over 500 loops on a network an ID3000 system offers unrivalled stability versatility and capacity. When it comes to giving you the earliest possible warning of a potential fire threat the ID3000 supports Notifiers comprehensive range of detectors advanced fire detection sensors and loop devices delivering you the most complete and versatile fire alarm system in the market place.The ID3000 can be programmed to adapt to the different uses of the areas where smoke detectors are installed. A total of 9 different sensitivity levels can be assigned to individual smoke sensors thereby allowing the system designer to closely match the sensors response to the environment in which the device is located. This even allows smoke detection to be turned off leaving heat detection active.Key Features2-8 Analogue Addressable Loops each of up to 198 devices255 Fire zones per panelFully approved peer to peer network of up to 63 panels maintains 3 second call point response time over the networkFlexible timer functions system sensitivity and functionality can be tailored for the time of day or day of weekSophisticated cause and effect programming including support for non-fire signals and over-ride capability for smoke control systems.Convenience features for commissioning and maintenance engineers such as auto-learn of loops walk test and double address detection.CPD approved by LPCB BRE VdSKit Contains1 x 020-538 - Basic Equipment kit 2-8 loops2 x 020-588 - Dual loop board kit1 x 020-579 - PSU 7A power supply. 4.5A or 7A user selectable1 x 020-543- Dual transmission path board kit1 x 020-474-009 - Extended deep back-box kitspace for up to 38Ah batteries. H620mm W500mm D220mm.1 x 020-480-009 - Main cover kit1 x 020-481-009 - Extension cover kit1 x 020-559-001 - Extension chassis kit. LED indications for zones 1-64. Space for internal printer

GBP 5150.30
1

Notifier ID3000 8 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-738

Notifier ID3000 8 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-738

Notifier ID3000 8 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-738The Notifier ID3000 family of fire alarm control panels deliver the power and flexibility to meet the even the most demanding of requirements. From 2 to 8 loops in a single ID3000 panel to over 500 loops on a network an ID3000 system offers unrivalled stability versatility and capacity. When it comes to giving you the earliest possible warning of a potential fire threat the ID3000 supports Notifiers comprehensive range of detectors advanced fire detection sensors and loop devices delivering you the most complete and versatile fire alarm system in the market place.The ID3000 can be programmed to adapt to the different uses of the areas where smoke detectors are installed. A total of 9 different sensitivity levels can be assigned to individual smoke sensors thereby allowing the system designer to closely match the sensors response to the environment in which the device is located. This even allows smoke detection to be turned off leaving heat detection active.Key Features2-8 Analogue Addressable Loops each of up to 198 devices255 Fire zones per panelFully approved peer to peer network of up to 63 panels maintains 3 second call point response time over the networkFlexible timer functions system sensitivity and functionality can be tailored for the time of day or day of weekSophisticated cause and effect programming including support for non-fire signals and over-ride capability for smoke control systems.Convenience features for commissioning and maintenance engineers such as auto-learn of loops walk test and double address detection.CPD approved by LPCB BRE VdSKit Contains1 x 020-538 - Basic Equipment kit 2-8 loops3 x 020-588 - Dual loop board kit1 x 020-579 - PSU 7A power supply. 4.5A or 7A user selectable1 x 020-543- Dual transmission path board kit1x 020-548 - Optional status indicator board kit for 7A PSU1 x 020-473-009 - Extended back-box kit Space for up to 17Ah batteries. H620mm W500mm D122mm.1 x 020-480-009 - Main cover kit1 x 020-481-009 - Extension cover kit1 x 020-559-001 - Extension chassis kit. LED indications for zones 1-64. Space for internal printer1 x 020-541-009 - 7A PSU78AH battery cabinet kit

GBP 6122.94
1

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-730

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-730

Notifier ID3000 4 Loop Addressable Control Panel with 4.5A Power Supply and 64 Zone LED Interface 020-730The Notifier ID3000 family of fire alarm control panels deliver the power and flexibility to meet the even the most demanding of requirements. From 2 to 8 loops in a single ID3000 panel to over 500 loops on a network an ID3000 system offers unrivalled stability versatility and capacity. When it comes to giving you the earliest possible warning of a potential fire threat the ID3000 supports Notifiers comprehensive range of detectors advanced fire detection sensors and loop devices delivering you the most complete and versatile fire alarm system in the market place.The ID3000 can be programmed to adapt to the different uses of the areas where smoke detectors are installed. A total of 9 different sensitivity levels can be assigned to individual smoke sensors thereby allowing the system designer to closely match the sensors response to the environment in which the device is located. This even allows smoke detection to be turned off leaving heat detection active.Key Features2-8 Analogue Addressable Loops each of up to 198 devices255 Fire zones per panelFully approved peer to peer network of up to 63 panels maintains 3 second call point response time over the networkFlexible timer functions system sensitivity and functionality can be tailored for the time of day or day of weekSophisticated cause and effect programming including support for non-fire signals and over-ride capability for smoke control systems.Convenience features for commissioning and maintenance engineers such as auto-learn of loops walk test and double address detection.CPD approved by LPCB BRE VdSKit Contains1 x 020-538 - Basic Equipment kit 2-8 loops1 x 020-588 - Dual loop board kit1 x 020-579 - PSU 7A power supply 4.5A or 7A user selectable1 x 020-543 - Dual transmission path board kit1 x 020-474-009 - Extended deep back-box kit Space for up to 38Ah batteries. H620mm W500mm D220mm.1 x 020-480-009 - Main cover kit1 x 020-481-009 - Extension cover kit1 x 020-559-001 - Extension chassis kit. LED indications for zones 1-64. Space for internal printer

GBP 4599.50
1

Notifier Local Silence Button Assembly Includes Wiring Loom NF-SIL-B

Notifier Local Silence Button Assembly Includes Wiring Loom NF-SIL-B

Notifier Advanced Alarm Management Notifier Local Silence Button Assembly Includes Wiring Loom NF-SIL-BThe NOTIFIER Local Silence Button in conjunction with the advanced programming provided by the Pearl control panel enables the use of a full BS5839 Part 1 system in applications such as assisted living retirement homes student accommodation high rise residential buildings. Often the risk of false alarm in such buildings has led to these sorts of installation being provided with individual systems for the flats linked to a landlord system for the shared area.The local silence button is a multi-position switch that allows not only sounder test and silencing but also disablement of smoke detection and the indication of disablement. As with other features it is flexible in configuration so that the facilities may be tailored to suit each site.FeaturesBest detection throughout. Allows Opal multi criteria detectors to reduce false alarms.Fully configurable. Allowing the installer to design delay periods and response times on all parts of the system in order to ensure it meets your building requirements.Flexible and simple to install. The Local Silence Button is available in a kit including wiring loom and loop moduleSupporting compliance. BS5839 Part 6 requires the alarm in each dwelling to be tested on a regular basis. This activity is logged on the Pearl system allowing landlords to check the residents are performing this task ensuring fire safety and compliance.

GBP 113.57
1

Notifier NFX-SMT2-IV Optical amp Thermal Multi Detector - Ivory

Notifier NFX-SMT2-IV Optical amp Thermal Multi Detector - Ivory

Notifier NFX-SMT2 Optical Thermal Multi Detector - IvoryThe Opal multi-criteria multi-sensor photo thermal detector uses thermal assistance to the core photoelectric smoke detector to give enhanced false alarm immunity and faster response to a wide range of incipient fi res. The plug-in unit combines two separate sensing elements that are managed by embedded software to act as a single unit. The Opal NFXI-SMT2 conforms to EN54-7 a 58C fixed temperature and rate of rise thermal assistance conforming to EN54-5.The thermal detection function combines thermistor technology with a software corrected linear temperature response. In areas where the normal daytime activities may potentially create unwanted alarms the detector can be programmed to operate in a heat only mode automatically reverting to full photo-thermal operation during unoccupied periods.The sensing elements of the Opal NFXI-SMT2 are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detector has built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key FeaturesBuilt in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 129.79
1

Notifier NFXI-SMT2 Optical amp Thermal Multi Detector - White

Notifier NFXI-SMT2 Optical amp Thermal Multi Detector - White

Notifier NFXI-SMT2 Optical Thermal Multi DetectorThe Opal multi-criteria multi-sensor photo thermal detector uses thermal assistance to the core photoelectric smoke detector to give enhanced false alarm immunity and faster response to a wide range of incipient fires. The plug-in unit combines two separate sensing elements that are managed by embedded software to act as a single unit.The Opal NFXI-SMT2 conforms to EN54-7 a 58C fixed temperature and rate of rise thermal assistance conforming to EN54-5. The thermal detection function combines thermistor technology with a software corrected linear temperature response. In areas where the normal daytime activities may potentially create unwanted alarms the detector can be programmed to operate in a heat only mode automatically reverting to full photo-thermal operation during unoccupied periods.The sensing elements of the Opal NFXI-SMT2 are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detector has built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key FeaturesBuilt in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 69.77
1

Notifier NFXI-SMT2 Analogue Addressable Optical amp Thermal Multi Detector - Black

Notifier NFXI-SMT2 Analogue Addressable Optical amp Thermal Multi Detector - Black

Notifier NFXI-SMT2 Analogue Addressable Optical Thermal Multi Detector - BlackThe Opal multi-criteria multi-sensor photo thermal detector uses thermal assistance to the core photoelectric smoke detector to give enhanced false alarm immunity and faster response to a wide range of incipient fires. The plug-in unit combines two separate sensing elements that are managed by embedded software to act as a single unit.The Opal NFXI-SMT2 conforms to EN54-7 a 58C fixed temperature and rate of rise thermal assistance conforming to EN54-5. The thermal detection function combines thermistor technology with a software corrected linear temperature response. In areas where the normal daytime activities may potentially create unwanted alarms the detector can be programmed to operate in a heat only mode automatically reverting to full photo-thermal operation during unoccupied periods.The sensing elements of the Opal NFXI-SMT2 are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. The detector has built in short circuit isolation and two integral tri-colour LEDs that provide 360 local visual indication of the device status. The LEDs are programmable with static or blinking red amber and green status indications available.Key FeaturesBuilt in short circuit isolationNew advanced Opal protocol allows mapping of the loop for precise fault location using isolatorsTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to complement modern buildings100 mechanical and electrical backwards compatibilityBase designed to ease installation and wiring

GBP 107.08
1

Notifier PRN-ID Printer Kit for ID61 ID62 ID2000 ID3000 020-644-009

Notifier PRN-ID Printer Kit for ID61 ID62 ID2000 ID3000 020-644-009

Notifier PRN-ID Printer Kit for ID61 ID62 ID2000 ID3000 020-644-009The Notifier 020-644-009 is a printer kit designed for use with the Notifier ID3000 fire alarm control panel. The printer option on the panel is ideal for printing out a hard copy of the events on the fire alarm system. The Notifier 020-644-009 Printer option is great for both End Users and Fire Alarm System engineers as hard copies can be kept of commissioning maintenance and weekly testing events.When used with the Notifier ID3000 Panel this printer kit is designed to be mounted on an extension chassis. The extension chassis is designed to be installed into an extended backbox which is specially designed to accommodate an extension chassis. TheNotifier 020-644-009 PrinterKit is also compatible with the Notifier ID2000 ID61 and ID62 Control Panels.

GBP 739.81
1