508 results (0,19953 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

25x Pferd Fibre Disc Diameter 180mm Victograin 36 for Maximum Performance on Steel

25x Pferd Fibre Disc Diameter 180mm Victograin 36 for Maximum Performance on Steel

PFERD fibre discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fibre disc". For maximum aggressive grinding with an extremely long tool life and an outstanding stock removal rate on steel and hard materials. Outstanding, constant high performance thanks to the VICTOGRAIN abrasive grain. The VICTOGRAIN abrasive triangles are fixed to the substrate on one of their sides. This means they are securely fixed in place and, together with their slim design, offer an extremely large chip space in order to further improve machining efficiency. The structure of the triangular VICTOGRAIN has also been specially adapted to maximize results. The very small crystals inside the triangles ensure optimal wear characteristics as sharp cutting edges are always exposed, but only the minimum amount of abrasive grain/the triangle breaks off. By combining all these properties together, users benefit from the ultimate, constant performance during cool grinding and an extremely long tool life together with consistent workpiece surface roughness.

GBP 132.25
1

50x Pferd Combidisc SIC Abrasive Disc CDR Diameter 75mm SIC120 RS for Backward Grinding

50x Pferd Combidisc SIC Abrasive Disc CDR Diameter 75mm SIC120 RS for Backward Grinding

For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics. Particularly recommended for use on titanium alloys. Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 119.50
1

50x Pferd Combidisc SIC Abrasive Disc CDR Diameter 75mm SIC80 RS for Backward Grinding

50x Pferd Combidisc SIC Abrasive Disc CDR Diameter 75mm SIC80 RS for Backward Grinding

For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics. Particularly recommended for use on titanium alloys. Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 119.50
1

100x Pferd Combidisc SIC Abrasive Disc CDR Diameter 38mm SIC60 RS for Backward Grinding

100x Pferd Combidisc SIC Abrasive Disc CDR Diameter 38mm SIC60 RS for Backward Grinding

For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics. Particularly recommended for use on titanium alloys. Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 159.00
1

100x Pferd Combidisc SIC Abrasive Disc CDR Diameter 38mm SIC120 RS for Backward Grinding

100x Pferd Combidisc SIC Abrasive Disc CDR Diameter 38mm SIC120 RS for Backward Grinding

For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics. Particularly recommended for use on titanium alloys. Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 159.00
1

10x Pferd Polifan PFR 115-L A40 SGP Curve Aluminium

10x Pferd Polifan PFR 115-L A40 SGP Curve Aluminium

Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use. The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. It is the only flap disc in the world that has flaps on both the grinding side and on the rear side, as well as on the radius. Special flap disc for work on fillet welds on aluminium.

GBP 113.90
1

10x Pferd Polifan PFR 125-L A 40 SGP Curve Aluminium

10x Pferd Polifan PFR 125-L A 40 SGP Curve Aluminium

Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use. The patented flap disc POLIFAN-CURVE has been specially developed for work on fillet welds. It is the only flap disc in the world that has flaps on both the grinding side and on the rear side, as well as on the radius. Special flap disc for work on fillet welds on aluminium.

GBP 119.90
1

50x Pferd Combidisc Aluminium Oxide Abrasive Disc CDR Diameter 75mm A120 Plus RS for Backward Grinding

50x Pferd Combidisc Aluminium Oxide Abrasive Disc CDR Diameter 75mm A120 Plus RS for Backward Grinding

For general applications from coarse to fine grinding, with a high stock removal rate and long tool life. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 117.50
1

50x Pferd Combidisc Aluminium Oxide Abrasive Disc CDR Diameter 75mm A80 Plus RS for Backward Grinding

50x Pferd Combidisc Aluminium Oxide Abrasive Disc CDR Diameter 75mm A80 Plus RS for Backward Grinding

For general applications from coarse to fine grinding, with a high stock removal rate and long tool life. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 117.50
1

100x Pferd Combidisc Aluminium Oxide Abrasive Disc CDR Diameter 38mm A60 Plus RS for Backward Grinding

100x Pferd Combidisc Aluminium Oxide Abrasive Disc CDR Diameter 38mm A60 Plus RS for Backward Grinding

For general applications from coarse to fine grinding, with a high stock removal rate and long tool life. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 159.00
1

100x Pferd Combidisc Aluminium Oxide Abrasive Disc CDR Diameter 38mm A80 Plus RS for Backward Grinding

100x Pferd Combidisc Aluminium Oxide Abrasive Disc CDR Diameter 38mm A80 Plus RS for Backward Grinding

For general applications from coarse to fine grinding, with a high stock removal rate and long tool life. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 159.00
1

100x Pferd Combidisc Aluminium Oxide Abrasive Disc CDR Diameter 38mm A120 Plus RS for Backward Grinding

100x Pferd Combidisc Aluminium Oxide Abrasive Disc CDR Diameter 38mm A120 Plus RS for Backward Grinding

For general applications from coarse to fine grinding, with a high stock removal rate and long tool life. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 159.00
1

Pferd Tungsten Carbide Small High-performance Burr Set Micro 3 Piece Shank Diameter 6mm Finishing

Pferd Tungsten Carbide Small High-performance Burr Set Micro 3 Piece Shank Diameter 6mm Finishing

Tungsten carbide burrs with the MICRO cut are specifically designed for finishing and are used in areas in which mounted grinding points are usually used. They offer a higher stock removal rate and produce a high surface quality, particularly compared with conventionally milled surfaces. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined. The 1312 MICRO set contains three tungsten carbide burrs for finishing work in the most common shapes and dimensions. The sturdy plastic box protects the tools from dirt and damage.

GBP 169.99
1

50x Pferd Combidisc Ceramic Oxide Grain Mini Fibre Disc CDFR Diameter 75mm CO-COOL120 for Backward Grinding

50x Pferd Combidisc Ceramic Oxide Grain Mini Fibre Disc CDFR Diameter 75mm CO-COOL120 for Backward Grinding

For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 169.50
1

50x Pferd Combidisc Ceramic Oxide Grain Mini Fibre Disc CDFR Diameter 75mm CO-COOL50 for Backward Grinding

50x Pferd Combidisc Ceramic Oxide Grain Mini Fibre Disc CDFR Diameter 75mm CO-COOL50 for Backward Grinding

For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding. RS type COMBIDISC abrasive discs are exceptionally well-suited for weld dressing of backwards repair welds, e.g. in cases, slots and grooves on engines and for processing welded-on combustor plates. Unlike on conventional abrasive discs, the abrasive coating is on the underside of the tool, which allows backwards working.

GBP 169.50
1

5x Pferd HD Brass File 1612W 300C0

5x Pferd HD Brass File 1612W 300C0

PFERD special files are tools that are optimized for specific uses, e.g. for processing soft metals or thermosetting plastics, for deburring parts turned on a lathe or for sharpening cutting tools. Rectangular file, tanged and special cut on three sides, one edge uncut. Shape A according to DIN 7261. Particularly suitable for work on soft metals. Special cut specifically designed for coarse stock removal on soft metals such as aluminium. Files are supplied in industrial packaging without a handle.

GBP 139.95
1