det hele handler ikke om dig from GBP 51 | See the cheapest prices and offers on css.lazzaweb.dk

Radius Systems MDPE Blue Pipe - 32mm x 100m

Solid wall 32mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution. 12.5 bar maximum operating pressure. SDR 11-rated. 3mm wall thickness. WRAS approved & complies with BS EN 12201. Flexible, lightweight and easy to install Corrosion free material for longer life Colour-coded PE80 light blue exterior, PE80 black inner layer Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 32mm pipe inserts and compression couplings & fittings to create a mains water supply network underground. In a domestic UK property the standard service pipe size is 25mm blue MDPE. Check with your local water authority's requirements. Use black HDPE for above ground water distribution instead of blue MDPE.

GBP 379.99

1

Radius Systems MDPE Blue Pipe - 25mm x 100m

Solid wall 25mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution. 12.5 bar maximum operating pressure. SDR 11-rated. 2.3mm wall thickness. WRAS approved & complies with BS EN 12201. Flexible, lightweight and easy to install Corrosion free material for longer life Colour-coded PE80 light blue exterior, PE80 black inner layer Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 25mm pipe inserts and compression couplings & fittings to create a mains water supply network underground. In a domestic UK property the standard service pipe size is 25mm blue MDPE. Check with your local water authority's requirements. Use black HDPE for above ground water distribution instead of blue MDPE.

GBP 239.99

1

Radius Systems MDPE Blue Pipe - 25mm x 25m

Solid wall 25mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution. 12.5 bar maximum operating pressure. SDR 11-rated. 2.3mm wall thickness. WRAS approved & complies with BS EN 12201. Flexible, lightweight and easy to install Corrosion free material for longer life Colour-coded PE80 light blue exterior, PE80 black inner layer Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 25mm pipe inserts and compression couplings & fittings to create a mains water supply network underground. In a domestic UK property the standard service pipe size is 25mm blue MDPE. Check with your local water authority's requirements. Use black HDPE for above ground water distribution instead of blue MDPE.

GBP 66.99

1

Radius Systems MDPE Blue Pipe - 32mm x 25m

Solid wall 32mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution. 12.5 bar maximum operating pressure. SDR 11-rated. 3mm wall thickness. WRAS approved & complies with BS EN 12201. Flexible, lightweight and easy to install Corrosion free material for longer life Colour-coded PE80 light blue exterior, PE80 black inner layer Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 32mm pipe inserts and compression couplings & fittings to create a mains water supply network underground. In a domestic UK property the standard service pipe size is 25mm blue MDPE. Check with your local water authority's requirements. Use black HDPE for above ground water distribution instead of blue MDPE.

GBP 109.99

1

Radius Systems MDPE Blue Pipe - 20mm x 25m

Solid wall 20mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution. 12.5 bar maximum operating pressure. SDR 9-rated. 2.3mm wall thickness. WRAS approved & complies with BS EN 12201. Flexible, lightweight and easy to install Corrosion free material for longer life Colour-coded PE80 light blue exterior, PE80 black inner layer Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 20mm pipe inserts and compression couplings & fittings to create a mains water supply network underground. In a domestic UK property the standard service pipe size is 25mm blue MDPE. Check with your local water authority's requirements. Use black HDPE for above ground water distribution instead of blue MDPE.

GBP 53.99

1

Radius Systems MDPE Blue Pipe - 20mm x 100m

Solid wall 20mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution. 12.5 bar maximum operating pressure. SDR 9-rated. 2.3mm wall thickness. WRAS approved & complies with BS EN 12201. Flexible, lightweight and easy to install Corrosion free material for longer life Colour-coded PE80 light blue exterior, PE80 black inner layer Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 20mm pipe inserts and compression couplings & fittings to create a mains water supply network underground. In a domestic UK property the standard service pipe size is 25mm blue MDPE. Check with your local water authority's requirements. Use black HDPE for above ground water distribution instead of blue MDPE.

GBP 179.99

1

Radius Systems MDPE Blue Pipe - 50mm x 25m

Solid wall 50mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution. 12.5 bar maximum operating pressure. SDR 11-rated. 4.6mm wall thickness. WRAS approved & complies with BS EN 12201. Flexible, lightweight and easy to install Corrosion free material for longer life Colour-coded PE80 light blue exterior, PE80 black inner layer Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 50mm pipe inserts and compression couplings & fittings to create a mains water supply network underground. 50mm blue water pipe is typically used where 100m to 800m of continuous below ground water supply pipe is required. However, check with your local water authority as distances vary. Manufactured from MDPE. Use black HDPE for above ground water distribution instead of blue MDPE.

GBP 319.99

1

Radius Systems MDPE Blue Pipe - 50mm x 100m

Solid wall 50mm blue MDPE (also known as alkathene) pipe coil suitable for below ground potable water mains supply distribution. 12.5 bar maximum operating pressure. SDR 11-rated. 4.6mm wall thickness. WRAS approved & complies with BS EN 12201. Flexible, lightweight and easy to install Corrosion free material for longer life Colour-coded PE80 light blue exterior, PE80 black inner layer Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 50mm pipe inserts and compression couplings & fittings to create a mains water supply network underground. 50mm blue water pipe is typically used where 100m to 800m of continuous below ground water supply pipe is required. However, check with your local water authority as distances vary. Manufactured from MDPE. Use black HDPE for above ground water distribution instead of blue MDPE.

GBP 839.99

1

Radius Systems HDPE Black Pipe - 50mm x 100m

50mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils. 16 bar maximum operating pressure SDR 9-rated 2.3mm (min) /2.7mm (max) wall thickness 14.6mm (min) /15.7mm (max) internal diameter 20.3mm maximum outside diameter This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required. Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects. Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe Flexible, lightweight and easy to install Corrosion free material for longer life Tough black PE100 HDPE material Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 20mm pipe inserts and compression couplings & fittings to create a water supply network. BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

GBP 749.99

1

Radius Systems HDPE Black Pipe - 20mm x 25m

20mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils. 16 bar maximum operating pressure SDR 9-rated 2.3mm (min) /2.7mm (max) wall thickness 14.6mm (min) /15.7mm (max) internal diameter 20.3mm maximum outside diameter This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required. Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects. Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe Flexible, lightweight and easy to install Corrosion free material for longer life Tough black PE100 HDPE material Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 20mm pipe inserts and compression couplings & fittings to create a water supply network. BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

GBP 50.99

1

Radius Systems HDPE Black Pipe - 25mm x 25m

25mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils. 16 bar maximum operating pressure SDR 9-rated 2.3mm (min) /2.7mm (max) wall thickness 14.6mm (min) /15.7mm (max) internal diameter 20.3mm maximum outside diameter This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required. Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects. Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe Flexible, lightweight and easy to install Corrosion free material for longer life Tough black PE100 HDPE material Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 20mm pipe inserts and compression couplings & fittings to create a water supply network. BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

GBP 59.99

1

Radius Systems HDPE Black Pipe - 32mm x 100m

32mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils. 16 bar maximum operating pressure SDR 9-rated 2.3mm (min) /2.7mm (max) wall thickness 14.6mm (min) /15.7mm (max) internal diameter 20.3mm maximum outside diameter This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required. Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects. Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe Flexible, lightweight and easy to install Corrosion free material for longer life Tough black PE100 HDPE material Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 20mm pipe inserts and compression couplings & fittings to create a water supply network. BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

GBP 339.99

1

Radius Systems HDPE Black Pipe - 25mm x 100m

25mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils. 16 bar maximum operating pressure SDR 9-rated 2.3mm (min) /2.7mm (max) wall thickness 14.6mm (min) /15.7mm (max) internal diameter 20.3mm maximum outside diameter This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required. Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects. Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe Flexible, lightweight and easy to install Corrosion free material for longer life Tough black PE100 HDPE material Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 20mm pipe inserts and compression couplings & fittings to create a water supply network. BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

GBP 199.99

1

Radius Systems HDPE Black Pipe - 20mm x 100m

20mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils. 16 bar maximum operating pressure SDR 9-rated 2.3mm (min) /2.7mm (max) wall thickness 14.6mm (min) /15.7mm (max) internal diameter 20.3mm maximum outside diameter This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required. Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects. Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe Flexible, lightweight and easy to install Corrosion free material for longer life Tough black PE100 HDPE material Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 20mm pipe inserts and compression couplings & fittings to create a water supply network. BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

GBP 179.99

1

Radius Systems HDPE Black Pipe - 32mm x 25m

32mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils. 16 bar maximum operating pressure SDR 9-rated 2.3mm (min) /2.7mm (max) wall thickness 14.6mm (min) /15.7mm (max) internal diameter 20.3mm maximum outside diameter This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required. Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects. Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe Flexible, lightweight and easy to install Corrosion free material for longer life Tough black PE100 HDPE material Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 20mm pipe inserts and compression couplings & fittings to create a water supply network. BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

GBP 109.99

1

Radius Systems HDPE Black Pipe - 50mm x 25m

50mm black PE100 HDPE pipe (high density polyethylene) available in 25, and 100m coils. 16 bar maximum operating pressure SDR 9-rated 2.3mm (min) /2.7mm (max) wall thickness 14.6mm (min) /15.7mm (max) internal diameter 20.3mm maximum outside diameter This highly versatile product is suitable for almost any non-potable water application, as well as above ground potable water distribution networks. Check with your local water authority before using for potable drinking water as blue MDPE may be required. Also suitable for hydroelectricity schemes, geothermal pipework, irrigation, aquaculture, marine outfalls and many other projects. Replaces what was previously known as 20mm black MDPE or 20mm black alkathene pipe Flexible, lightweight and easy to install Corrosion free material for longer life Tough black PE100 HDPE material Fully compatible with a range of push-fit fittings from JDP Suitable for open-cut and no-dig installation methods and for use in pipeline rehabilitation projects Use 20mm pipe inserts and compression couplings & fittings to create a water supply network. BSI approved (Kitemarked) to BS EN 12201-2:2011 + A1:2013. Approved under regulation 31 of the Water Supply (Water Quality) Regulations 2000.

GBP 229.99

1

Awardvindende Google Marketing Powerhouse

Brand

Colour

Size

Merchant

Price (EUR)