75 results (0,13872 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

SAS NET206 Push To Call Lead 2.5m Long

SAS NET206 Push To Call Lead 2.5m Long

SAS NET206 Push To Call Lead 2.5m LongThe NET206 is designed to plug into our range of nurse call units. It comes equipped with a sturdy lead 2.5 metres long with moulded jack plug and cable strain. A large orange button is provided for the patient to press with a finger or even the palm of their hand.If the lead is accidentally pulled away from the nurse call point a call will be made to draw the fact to the attention of the carer. The lead is shown in its wall mounted holster that can be provided so the lead can be stored safely and neatly when not in use.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 19.44
1

SAS NET210 Over Door Light Addressable Type

SAS NET210 Over Door Light Addressable Type

SAS NET210 Over Door Light Addressable TypeUseful as options these lights can be fitted outside each room to indicate that a call has been made. Staffs often find these useful in the rapid location of calls. The light pulses red to signal the type of call and green to show that the call is being attended to and also staff presence.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 115.84
1

SAS NET218 Door Monitoring Unit with Key Switch for Isolation Reset

SAS NET218 Door Monitoring Unit with Key Switch for Isolation Reset

SAS NET218 Door Monitoring Unit with Key Switch for Isolation ResetLocated adjacent to doors or drug cabinets these units generate an alarm call if the door is breached. A key switch is provided to isolate the door monitor when a door needs to be opened the same key is used to reset following activation. A red reassurance light shows its status. A timed override feature is provided to allow staff to exit a door without it activating. This can be done by a simple magnetic key swipe see NET216 staff key or if a higher level of security is required by a coded access keypad.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 115.84
1

SAS NET228 Pager Transmitter Alphanumeric Type

SAS NET228 Pager Transmitter Alphanumeric Type

SAS NET228 Pager Transmitter Alphanumeric TypeAlphanumeric paging transmitter used in conjunction with the NET229 pocket pagers. The pager is used to send text messages to the staff showing them the precise location where assistance is required. It can be configured to work as an on-site paging system with connections to a PC or telephone system. It is supplied with RS232 interface unit connection lead and wave aerial.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 1296.00
1

SAS NET210R Over Door Light Addressable Type Voltage Free

SAS NET210R Over Door Light Addressable Type Voltage Free

SAS NET210ROver Door Light Addressable Type Voltage FreeOver door lights are usually fitted outside a room situated as the name suggests above the door. The device works in conjunction with the call point inside the room. Whenever its assigned call point is activated the over door light flashes the corresponding pattern for that alarm condition. They are used commonly for rapid obvious detection of an alarm condition as they can be seen down a corridor. A relay with dry contacts version is available to interface with other systems. Also there is a sounder version available these are usually used in conjunction with door monitors NET218. Each over door light can be configured to respond to up to eight addressable call points.Useful as options these lights can be fitted outside each room to indicate that a call has been made. Staffs often find these useful in the rapid location of calls. The light pulses red to signal the type of call and green to show that the call is being attended to and also staff presence.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 126.36
1

SAS NET205M Patient Call Unit with Alarm amp Crash Call Facilities Push Button Reset

SAS NET205M Patient Call Unit with Alarm amp Crash Call Facilities Push Button Reset

SAS NET205M Patient Call Unit with Alarm Crash Call Facilities Push Button ResetUsually located at each bed-head they feature a large orange button which is used by patients when in need of assistance. Staff attending a call can raise a more urgent staff-to-staff call to summon help if necessary and a third call level crash call can be used for medical emergencies. They have a socket for a push-to-call extension lead NET206 that is monitored in case the lead is pulled out from its socket inadvertently.The staff operations are carried out using push buttons on this version. The blue reset button can also be used to log a visit to a room and also register the nurses presence within the room. A reassurance light is illuminated red to reassure a call has been made and green to inform the patient that staff are on their way.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 115.84
1

SAS NET205MPC Net205M with Pull Cord

SAS NET205MPC Net205M with Pull Cord

SAS NET205MPC Net205M with Pull CordThe NET205MPC is a Net205M with Pull Cord.Usually located at each bed-head they feature a large orange button which is used by patients when in need of assistance. Staff attending a call can raise a more urgent staff-to-staff call to summon help if necessary and a third call level crash call can be used for medical emergencies. They have a socket for a push-to-call extension lead NET206 that is monitored in case the lead is pulled out from its socket inadvertently.The staff operations are carried out using push buttons on this version. The blue reset button can also be used to log a visit to a room and also register the nurses presence within the room. A reassurance light is illuminated red to reassure a call has been made and green to inform the patient that staff are on their way.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.Key FeaturesPull Cord

GBP 136.90
1

SAS RED228 Alphanumeric Paging Transmitter with Aerial

SAS RED228 Alphanumeric Paging Transmitter with Aerial

SAS RED228 Alphanumeric Paging Transmitter with AerialAn alphanumeric paging transmitter used in conjunction with the RED229 pocket pagers. The pager is used to send text messages to the response staff showing them the precise location where assistance is required. It can be configured in many different ways for example allowing only the highest priority alarm calls to be paged or to link several Red Alert systems via a common paging system. It can also be configured to work as an on-site paging system with connections to a PC or telephone system. It is supplied with RS232 interface unit connection lead and aerial.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 1296.00
1

SAS RED2096 Curo Reset Unit

SAS RED2096 Curo Reset Unit

SAS RED2096 Curo Reset UnitThe RED2086 alarm transmitter is carried by staff in establishments where they may feel at risk of an attack or might need to call for urgent assistance. This is our latest design of infra-red transmitter and it is powered a rechargeable battery. A full charge will last for months rather than weeks and a quick 2 hours is all it takes to get it back to a fully charged state. The transmitter incorporates a red alarm button and a unique emergency call pull activation that keeps the transmitter attached to your person. A pair of side buttons is provided to give a double action switch. A green button is pressed to check the battery condition indicated by an LED furthermore the nearest infra-red receivers reassurance light will flash to confirm a healthy signal. This is a confidence inspiring feature for the user who can quickly test the transmitter and receivers function when dealing with a potentially serious situation. As further backup a bleep will be heard from the transmitter when a battery requires a quick charge.The RED2096 reset transmitter has the same features as the alarm transmitter but has a blue button that is used to cancel alarm calls at their origin. This important feature means that calls have to be dealt with by visiting the area of activation.

GBP 113.40
1

SAS RED2086 Curo Alarm Unit

SAS RED2086 Curo Alarm Unit

SAS RED2086 Curo Alarm UnitThe RED2086 alarm transmitter is carried by staff in establishments where they may feel at risk of an attack or might need to call for urgent assistance. This is our latest design of infra-red transmitter and it is powered a rechargeable battery.A full charge will last for months rather than weeks and a quick 2 hours is all it takes to get it back to a fully charged state.The transmitter incorporates a red alarm button and a unique emergency call pull activation that keeps the transmitter attached to your person.A pair of side buttons is provided to give a double action switch. A green button is pressed to check the battery condition indicated by an LED furthermore the nearest infra-red receivers reassurance light will flash to confirm a healthy signal.This is a confidence inspiring feature for the user who can quickly test the transmitter and receivers function when dealing with a potentially serious situation.As further backup a bleep will be heard from the transmitter when a battery requires a quick charge.The RED2096 reset transmitter has the same features as the alarm transmitter but has a blue button that is used to cancel alarm calls at their origin. This important feature means that calls have to be dealt with by visiting the area of activation.

GBP 113.40
1

SAS NET234 Data Store Software

SAS NET234 Data Store Software

SAS NET234 Data Store SoftwareThe software package enables all events on the Network II system to be logged on a PC. The date time location and type of alarm call will be recorded along with reset and fault reports. A dedicated PC and printer are not required and the programme can be minimised and run in the background.Key FeaturesIt is possible to print selected data using the PCs own printer.The information displayed can be filtered to only shown the data you are currently interested in i.e. all logged information for 1st floor bedroom 6.An alert popup window or sound can be set to inform you of a new event.The colours of the text background and font can be altered to suit your requirements.Personal details can be entered for identification in the log i.e. family contact details or drugs information.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 729.00
1

SAS NET219 Over Door Indicator Light with Mini Buzzer

SAS NET219 Over Door Indicator Light with Mini Buzzer

SAS NET219 Over Door Indicator Light with Mini BuzzerUsed in conjunction with the door monitor this indicator light can be fitted above a controlled door to indicate when an alarm call has been made. These over door lights are fitted with a sounder to attract attention audibly as well as visually.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 126.36
1

SAS RED205C Infrared Slave Receiver Ceiling Mounted

SAS RED205C Infrared Slave Receiver Ceiling Mounted

SAS RED205C Infrared Slave Receiver Ceiling MountedThis receiver is used to increase the coverage of an infra-red receiver. They are commonly used in corridors large dining areas and en-suite wcs. Up to three slaves can be connected to an infra-red receiver which is sufficient to cover approximately 200 square metres. They are the same as the RED205 in appearance.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 63.18
1

SAS RED210R Overdoor Indicator Light with Volt Free Relay Contacts Rated at 1A 12Vd.c

SAS RED210R Overdoor Indicator Light with Volt Free Relay Contacts Rated at 1A 12Vd.c

SAS RED210R Overdoor Indicator Light with Volt Free Relay Contacts Rated at 1A 12Vd.cSimilar to the over door indicator light it can be activated by up to eight alarm points. The voltage free contacts provided can be used to activate other systems for example to lock or unlock emergency exit doors set off a strobe light or active a nearby CCTV camera.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 121.50
1

SAS RED210 Overdoor Indicator Light

SAS RED210 Overdoor Indicator Light

SAS RED210 Overdoor Indicator LightA useful option these lights can be fitted outside each room to indicate that an alarm call has been made from inside. Staff often find these useful in the rapid location of calls. The light pulses red to signal which priority of call has been initiated. It can be used as a group light to indicate calls from up to eight alarm points.The Red Alert system helps staff feel more secure knowing that in an emergency they can summon assistance at the touch of a button on their personal transmitter.

GBP 115.84
1

SAS NET207M Patient Call Unit with Alarm amp Infrared Sensor Push Button Reset

SAS NET207M Patient Call Unit with Alarm amp Infrared Sensor Push Button Reset

SAS NET207M Patient Call Unit with Alarm Infrared Sensor Push Button ResetThis call point has the same features and functions as the NET205M with the addition of an infra-red sensor. This sensor can be activated using one of our transmitters. We have transmitters especially designed for a patient to use and also for staff to carry.This type of call point is often installed in lounge areas so particularly vulnerable patients can be given a transmitter enabling them to call for assistance from their chair. Staffs often carry a transmitter when they may be subject to an assault from visitors or patients in these circumstances this type of call point would be installed throughout the building.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 147.42
1

SAS NET215 Slave Push Button Call Point

SAS NET215 Slave Push Button Call Point

SAS NET215 Slave Push Button Call PointThe NET215 are sometimes located in double bedrooms or en-suite bathrooms. This unit has a large orange call button and a socket for a push-to-call lead. As is does not have any reset or staff-to-staff alarm feature it is installed in conjunction with one of our nurse call units.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 73.72
1

SAS Caring Technology Touch-Wireless-CP Touch Wireless Call Point with Call Level No Reset

SAS Caring Technology Touch-Wireless-CP Touch Wireless Call Point with Call Level No Reset

SAS Caring Technology Touch-Wireless-CP Touch Wireless Call Point with CallLevel No ResetDesigned for challenging environments. The room unitmanufactured from injection molded Tritan Tx more resilient thanPolycarbonate is low profile and vandal resistant. The unit is touch buttonactuated and any of the above configuration of active buttons can be achieved.The patient touches the area denoted by the orange paddle to activate a patientcall. The hidden LED in the centre of the call point illuminates red when thebuttons are touched. A low battery warning will sound when the battery is low.Upon detection of a low battery a CALL signal is sent out this will not besent again until the battery has been changed. While the room units battery islow it will continue to flash its red LED every 15 seconds and sound its buzzerevery 2 minutes. Staff should be made aware of this. The buttons in the framestaff only can be used by the nurse to reset the call. Included 2x torx M3.5x 25mm security screws 3 x AAA batteries surface back box optionalThe wireless call points are a cost-effectiveapproach to add nurse call to an existing staff attack system. This helps keepdisruption to a minimum since no walls need to be chased and are easilyinstalled with an anti-ligature surface collar. The slave wireless call pointsyncs with a master IR receiver which is addressed to understand its location.

GBP 186.30
1

SAS RED2086RF Radio Curo Alarm Unit

SAS RED2086RF Radio Curo Alarm Unit

SAS RED2086RF Radio Curo Alarm UnitThe RED2086RF is a Radio Curo Alarm Unit.The RED2086 alarm transmitter is carried by staff in establishments where they may feel at risk of an attack or might need to call for urgent assistance. This is our latest design of infra-red transmitter and it is powered a rechargeable battery.A full charge will last for months rather than weeks and a quick 2 hours is all it takes to get it back to a fully charged state.The transmitter incorporates a red alarm button and a unique emergency call pull activation that keeps the transmitter attached to your person.A pair of side buttons is provided to give a double action switch. A green button is pressed to check the battery condition indicated by an LED furthermore the nearest infra-red receivers reassurance light will flash to confirm a healthy signal.This is a confidence inspiring feature for the user who can quickly test the transmitter and receivers function when dealing with a potentially serious situation.As further backup a bleep will be heard from the transmitter when a battery requires a quick charge.The RED2096 reset transmitter has the same features as the alarm transmitter but has a blue button that is used to cancel alarm calls at their origin. This important feature means that calls must be dealt with by visiting the area of activation.

GBP 153.90
1