12.835 results (0,25485 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

10x Sandvik Coromant 880-09 06W12H-P-GR Insert Grade 4044

10x Sandvik Coromant 880-09 06W12H-P-GR Insert Grade 4044

CoroDrill 880 Insert For Drilling Insert Usage Code - P Insert Grade 4044 (P40)(M35)(K20)(N20)(S35)(H20) PVD (Ti,Al)N2 coated insert for use on Steel,Stainless Steel, Cast Iron, Non-ferrous Materials, Heat Resistant Super Alloys and Hardened Materials Guide to Geometry/Feed: -GM geometry is the basic choice for most materials. Medium feed. -LM geometry is the best choice for long chipping materials, e.g. low carbon steel and stainless steels. Medium feed, insert with sharp positive edge. -GR geometry is the high feed choice for steel and cast iron. Insert with strong reinforced edge, suitable for roughing. -GT geometry is a problem solver for unstable conditions and interrupted cuts. Low to high feed. Good chip control in most materials.

GBP 183.90
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-16-05

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-16-05

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 229.99
1

Sandvik Coromant EF-40-05 Cylindrical Sleeve

Sandvik Coromant EF-40-05 Cylindrical Sleeve

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 219.99
1

Sandvik Coromant 132L-4025105-B Cylindrical Sleeve

Sandvik Coromant 132L-4025105-B Cylindrical Sleeve

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 189.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A24-A06

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A24-A06

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 269.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EFF-25-10

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EFF-25-10

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 279.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning 132P-160333-B

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning 132P-160333-B

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 219.99
1

Sandvik Coromant EF-40-10 Cylindrical Sleeve

Sandvik Coromant EF-40-10 Cylindrical Sleeve

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 219.99
1

Sandvik Coromant EF-40-20 Cylindrical Sleeve

Sandvik Coromant EF-40-20 Cylindrical Sleeve

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 219.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EFF-25-12

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EFF-25-12

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 279.99
1

Sandvik Coromant EF-40-25 Cylindrical Sleeve

Sandvik Coromant EF-40-25 Cylindrical Sleeve

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 219.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A24-A10

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A24-A10

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 269.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-16-12

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-16-12

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 229.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A24-A04

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A24-A04

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 269.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A16-A08

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A16-A08

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 229.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning 132P-201233-B

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning 132P-201233-B

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 229.99
1

Sandvik Coromant EF-40-16 Cylindrical Sleeve

Sandvik Coromant EF-40-16 Cylindrical Sleeve

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 219.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A16-A06

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A16-A06

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 229.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A16-A04

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A16-A04

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 229.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A20-A12

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A20-A12

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 239.99
1

Sandvik Coromant 131-3225-B Square Sleeve

Sandvik Coromant 131-3225-B Square Sleeve

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 229.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A20-A08

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A20-A08

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 239.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A16-A10

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A16-A10

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 229.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-20-16

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-20-16

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 229.99
1

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A20-A05

Sandvik Coromant Cylindrical Sleeve with Easy-fix Positioning EF-A20-A05

Sleeves for correct mounting of cylindrical bars, also for high coolant pressureEasyFix sleeves are a solution for cylindrical boring bars reducing set-up time. A spring plunger mounted in the sleeve clicks into a groove in the bar to guarantee the correct centre height. The slot in the cylindrical sleeve is metallic sealed which allows the existing coolant supply system to be used. The metallic sealing offers good performance also for high coolant pressure.Features & Benefits- Spring plunger solution (spring loaded ball) in the sleeve and the bar groove gives correct centre height of the insert every time you make a tool set-up.- Metallic sealing offers good performance for coolant pressure up to 150 bar (2200 psi).- Fast set-up time- Simple to use- Extended tool life- Excellent surface finish- Correct cutting edge centre height and positionApplication- The EasyFix sleeves fit a wide range of products: CoroTurn 107, CoroTurn 111, Silent Tools damped boring bars, CoroCut MB, CoroCut QI, CoroCut 1-2- Do not use EasyFix sleeves for boring bars with flats, as you wont attain the advantage of finding the correct centre height of the bar without the groove. A bar with flats normally clamps with screws from the top and locates on the flats of the bar.

GBP 239.99
1