hands on machine learning from GBP 24 | See the cheapest prices and offers on css.lazzaweb.dk

System Sensor M220EA Dual Input or Monitor Module

System Sensor M220EA Dual Input or Monitor ModuleThe wired range of Input Output modules has been redesigned to address its microcontroller obsolescence and grant full backward-compatibility.The M220EA monitors one or two sets of normally open contacts and has two tri-colour LED indicators One for each channel. The fire panel can be configured to switch the relevant channel indicator on red in the event of an alarm on an input channel. The indicators can be set by panel command to pulse green each time the module channel is polled. The relevant indicator blinks yellow if the module detects an open-circuit on the input circuit.This module features automatic fault supervision and a built-in isolator on the analogue addressable circuit. The isolator may be bypassed.Two mounting holes and a pair of DIN rail clips allow the module to be installed in any type of enclosure including a purpose-built surface-mount box M200E-SMB. The indicator LEDs and address switches are accessible and visible in both DIN-rail and surface mount installations.Key FeaturesIndividually addressable by the fire panelInput circuits supervised for open-circuit faultsTri-colour indicator LEDs visible from front and one sideAutomatic detection of short-circuits on AA circuitAA circuit short-circuit isolatorOptional isolator bypassScrewdriver operated rotary address switches accessible from front and one sideClips for top hat 35 mm DIN railTwo mounting holesUp to 99 module addresses per AA circuit F220 F100AUses two addresses on the analogue addressable circuitPlease note This product requires the M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails.

GBP 86.75

1

System Sensor IM-10EA Ten Input Monitor Module

System Sensor IM-10EA Ten Input Monitor ModuleThe IM-10EA Ten Input Monitor Module is intended for use in an intelligent alarm system. Each monitor module is intended to interface between a control panel and normally open contact devices such as pull stations. A common SLC input is used for all modules and the initiating device loops share a common supervisory supply and ground.Otherwise each monitor operates independently from the others. Each module also has panel-controlled tri-colour green red and amber LED indicators. The panel can cause the LEDs to blink latch on or latch off. The module also provides short circuit isolators to prevent shorts on the fire detection and alarm system loop from disabling more than one device on the intelligent loop.

GBP 538.40

1

System Sensor BSO-PP-N00 Base Sounder

System Sensor BSO-PP-N00 Base SounderBase sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility and integrates seamlessly with SS intelligent detectors. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounderLow current draw enables more devices on loopAdjustable volume control on device or from panelIntense strobe outputDeep and high IP base optionsPure White or Ivory body coloursCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panel

GBP 48.12

1

System Sensor BSO-PP-I00 Base Sounder with Loop Isolation

System Sensor BSO-PP-I00 Base Sounder with Loop IsolationBase sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility and integrates seamlessly with SS intelligent detectors. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounderLow current draw enables more devices on loopAdjustable volume control on device or from panelIntense strobe outputDeep and high IP base optionsPure White or Ivory body coloursCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panel

GBP 58.90

1

System Sensor BSO-PP-N00-B Base Sounder With Base

Please note The price of this product including the base is a special promotional offer directly from the manufacturer.System Sensor BSO-PP-N00-B Base Sounder With BaseBase sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility and integrates seamlessly with SS intelligent detectors. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesIncludes B501AP baseLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounderLow current draw enables more devices on loopAdjustable volume control on device or from panelIntense strobe outputDeep and high IP base optionsPure White or Ivory body coloursCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panel

GBP 35.16

1

System Sensor BSO-PP-I00-B Base Sounder with Loop Isolation With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor BSO-PP-I00-B Base Sounder with Loop Isolation With BaseBase sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility and integrates seamlessly with SS intelligent detectors. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesIncludes B501AP baseLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounderLow current draw enables more devices on loopAdjustable volume control on device or from panelIntense strobe outputDeep and high IP base optionsPure White or Ivory body coloursCommon base with detectors B501AP - includedDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panel

GBP 49.67

1

System Sensor M200XE Loop Isolation Module

System Sensor M200XE Loop Isolation ModuleThere is a large number of System Sensor intelligent fire alarm systems the address loop with a recipient device up to 198 is protected by a single one loop interruption but in the case of loop short circuit the entire loop it may become inoperable. With the M200XE modules shorting is not desired can be reduced.Only a small part of the system falls out if the loop is broken down into isolators because in the case of a possible loop only the two isolators will not be available to the control panel. If the address loop voltage drops below 7V the isolator module - with FET on the branch breaks it off the loop in the non-short-term part of the address loop the assets remain operational. If the breakdown the loop voltage rises on one side of the module then the separated short-circuit loop section 3 mA max. 15 mA control current flows through the module.In isolation the address loop wires between min. 2.2 kOhm resistance. The isolated state is maintained until the voltage of the disconnected section is 7V the short-circuit or the abnormally high current consumption ceases to exist. After the termination of the termination the isolator disengages the loop automatically.The two-colour LED on the module flashes green in the normal state of the loop every 3 seconds. If the module on any side it detects a short-circuit it illuminates with continuous yellow light during the shutter. The M200XE module in the M200E-SMB mounting box is wall-mounted with the M200E-DIN clip directly on the DIN rail M200E-PMB clip can be mounted in the fire panels box.

GBP 55.08

1

System Sensor WB-1AP Wet Base Shroud

System Sensor WB-1AP Wet Base ShroudFor environments where excessive humidity can cause nuisance alarms System Sensor has developed the WB-1AP plastic enclosure kit that minimizes the effect of condensation on the sensor. The enclosure is designed to accommodate 18.6mm conduit.

GBP 23.82

1

System Sensor M210E-B Single Input Monitor Module With M200E-SMB

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor M210E-B Single Input Monitor Module With M200E-SMBProvides single channel monitoring of normally open contact fire alarm and supervisory devices. The M210E has a single tri-colour greenredyellow LED which can be set by panel command to pulse green each time the module is polled. In case of an alarm the panel can switch the red indicator on continuously.The Yellow LED is controlled by the module and blinks to indicate an open circuit on the input circuit. This fault indication is overridden by a panel command to turn the red LED on.Key FeaturesComes withM200E-SMB for surface mounting

GBP 56.24

1

System Sensor M201EA Output Control Module

System Sensor M201EA Output Control ModuleThe System Sensor M200 wired range of Input Output modules has been redesigned to address its microcontroller obsolescence and grant full backward-compatibility.The new M200 look and feel combine maximum reliability with top-end functionality. Their unique mechanical design allows each module to be mounted in either a common wall box on a DIN rail or its dedicated enclosure.Key FeaturesCommon mechanical platform for modules enclosureLow standby currentFACP reads module power voltageHigh Power Loop 48V readyBuilt-in short circuit isolatorsAddressability through rotary switchesTri-colour Light PipeImproved Light Pipe visibility on two sidesPlug-in field wiring terminalsIntegrated DIN rail bracketsLasered engraved label dataIP rate 30Intertek ApprovedPlease note This product requires the M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails.

GBP 68.16

1

System Sensor M210EA Single Input Monitor Module

System Sensor M210EA Single Input Monitor ModuleThe newly designed platform of M200 family of Input Output modules completes the S200AP line of wired spot detectors with unaltered family feeling and undisputed continuity.The new M200 look and feel combine maximum reliability with top-end functionality all enriched by a cutting-edge modern design.Single and multi-way models are available within the renewed mechanical package reducing both the cost of installation and the mounting space required.Their unique mechanical design allows each module to be mounted in either a common wall box on a DIN rail or its dedicated enclosure. The DIN rail mounting option is possible thanks to smart DIN brackets directly built-in the enclosure. Irrespective of the mounting methods chosen the address switch is always visible and accessible for selection.Each module has built-in short circuit protection for the communications loop however to increase application flexibility the isolators can be selecteddeselected on an individual module basis.To help technicians in the maintenance and fault-finding process light pipes have been enlarged to increase visibility even in the most challenging space constrained application. Both the status LED and the rotary switch selection can be viewed on the two sides without having to remove the cover of the surface mounting box. The multi-colour status LED provide diagnostic information regarding the status of each individual inputoutput.For ease of installation testing and maintenance modules have been equipped with quick connectors.The renovated aesthetics offers data finely engraved on the enclosures surface by laser for lifetime durability and resistance to degradation.Please note This product requires the M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails.

GBP 57.14

1

System Sensor M221EA Dual Input and Single Control Output Combination Module

System Sensor M221EA Dual Input and Single Control Output Combination ModuleThe System Sensor M200 wired range of Input Output modules has been redesigned to address its microcontroller obsolescence and grant full backward-compatibility.The new M200 look and feel combine maximum reliability with top-end functionality. Their unique mechanical design allows each module to be mounted in either a common wall box on a DIN rail or its dedicated enclosure.Key FeaturesCommon mechanical platform for modules enclosureLow standby currentFACP reads module power voltageHigh Power Loop 48V readyBuilt-in short circuit isolatorsAddressability through rotary switchesTri-colour Light PipeImproved Light Pipe visibility on two sidesPlug-in field wiring terminalsIntegrated DIN rail bracketsLasered engraved label dataIP rate 30Intertek ApprovedPlease note This product requires the M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails.

GBP 128.75

1

System Sensor Agile USB Dongle M200WC-RF-PRO

System Sensor Agile USB Dongle M200WC-RF-PROThe System Sensor PRO M200WC-RF-PRO Agile USB Dongle isan interface that connects to a PCthrough a USB port and allows communication with System Sensor200 Series Commercial RF devices. The M200WC-RF-PRO ispowered directly by the USB port.This radio device complies with the requirements of 201453EUfor conformance with the RED directive.Please contact us for pricing and commissioning services on the System Sensor Agile wireless system equipment.

GBP 643.75

1

System Sensor MCX-55ME 5-Way Input amp 5-Way Output Card

System Sensor MCX-55ME 5-Way Input 5-Way Output CardModule with 5 inputs and 5 outputs. Each input can be connected on a monitored line to two or four conductors. Each output has a potential-free changeover contact. Compatible with both CLIP and Advanced control panels. The module uses 10 consecutive addresses of the 99 available per line addresses programmable via dip-switch. Unused inputs or outputs can be excluded. CPR Certificate in compliance to EN 54-18.

GBP 611.39

1

System Sensor Agile Wireless Waterproof Manual Call Point R5A-RF

System Sensor Agile Wireless Waterproof Manual Call Point R5A-RFThe R5A-RF radio call point is a battery-operated RF device designed for use with the M200G-RF radio gateway running on an addressable fire system using a compatible proprietary communication protocol. It is a waterproof manual call point combined with a wireless RF transceiver and fits onto a wireless backplate. This device conforms to EN54-11 and EN54-25. It complies with the requirements of 201453EU for conformance with the RED directive.

GBP 230.65

1

System Sensor DSS-PC-N00 Base Sounder VAD

System Sensor DSS-PC-N00 Base Sounder VADEN54-23 Detector Base Sounder Strobe is a high-quality loop powered device intended to alert building occupants of a potential fire. Approved to meet EN54-23 the European standard for Visual Alarm Devices it utilizes the System Sensor B501AP base for enhanced installation flexibility and integrates seamlessly with System Sensor intelligent detectors. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of sound output levels and tones make the device suitable for a wide variety of applications.Key FeaturesHigh output LED technology ensures optimum light output and low power requirementsHigh efficiency piezo disk and horn profile generate powerful sound outputFeatures Advanced protocol controllable sound output tone selection group polling independent sound or strobe functionAutomatic synchronization of sounder and strobeLarge cable accessRear or surface cable entryLoop continuity springSimple twist fit onto universal B501AP base positive poke yoke engagementAnti-tamper featureIn-built isolation optionsAddress tag for clear indicationSingle point of installation saves time cost inventoryLow current draw enables more devices on loopAdjustable volume control on device or from panelRotary wheels for clear address indicationClear lens with red flash

GBP 76.56

1

System Sensor DSS-PC-I00 Base Sounder VAD with Loop Isolation

System Sensor DSS-PC-I00 Base Sounder VAD with Loop IsolationEN54-23 Detector Base Sounder Strobe is a high-quality loop powered device intended to alert building occupants of a potential fire. Approved to meet EN54-23 the European standard for Visual Alarm Devices it utilizes the System Sensor B501AP base for enhanced installation flexibility and integrates seamlessly with System Sensor intelligent detectors.When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of sound output levels and tones make the device suitable for a wide variety of applications.Key FeaturesHigh output LED technology ensures optimum light output and low power requirementsHigh efficiency piezo disk and horn profile generate powerful sound outputFeatures Advanced protocol controllable sound output tone selection group polling independent sound or strobe functionAutomatic synchronization of sounder and strobeLarge cable accessRear or surface cable entryLoop continuity springSimple twist fit onto universal B501AP base positive poke yoke engagementAnti-tamper featureIn-built isolation optionsAddress tag for clear indicationSingle point of installation saves time cost inventoryLow current draw enables more devices on loopAdjustable volume control on device or from panelRotary wheels for clear address indicationClear lens with red flash

GBP 93.70

1

System Sensor CR-6EA Six Way Changeover Relay Output

System Sensor CR-6EA Six Way Changeover Relay OutputCR-6EA contains 6 bi-stable NO NC relays. The first address is set from 01 to 154 and the remaining addresses are automatically assigned as the next five addresses. You can disable up to three unused addresses. Each address corresponds to one isolated relay contact set that can be connected as normally open or as normally closed. The module allows the Signalling Centre to control each relay separately on demand. The module has a built-in double-sided short circuit isolator.

GBP 468.86

1

System Sensor Agile Rate of Rise Heat Detector 52051RE-RF

System Sensor Agile Rate of Rise Heat Detector 52051RE-RFThese heat sensors are battery operated RF devices designed for use with the M200G-RF radio gateway. They contain a wireless transceiver and run on an addressable fire system using a compatible proprietary communication protocol. The 52051E-RF provides fixed 58oC temperature sensing A1S. The 52051RE-RF provides 58oC rate-of-rise 10oCminute temperature sensing A1R. The sensors plug into the B501RF wireless base. These devices conform to EN54-25 and EN54-5 classes A1S and A1R. They comply with the requirements of 201453EU for conformance with the RED directive.

GBP 185.89

1

System Sensor Agile Wireless 58 Fixed Temperature Heat Detector 52051E-RF

System Sensor Agile Wireless 58 Fixed Temperature Heat Detector 52051E-RFThese heat sensors are battery operated RF devices designed for use with the M200G-RF radio gateway. They contain a wireless transceiver and run on an addressable fire system using a compatible proprietary communication protocol. The 52051E-RF provides fixed 58oC temperature sensing A1S. The 52051RE-RF provides 58oC rate-of-rise 10oCminute temperature sensing A1R. The sensors plug into the B501RF wireless base. These devices conform to EN54-25 and EN54-5 classes A1S and A1R. They comply with the requirements of 201453EU for conformance with the RED directive.

GBP 187.96

1

System Sensor DSS-PC-N00-B Base Sounder VAD With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor DSS-PC-N00-B Base Sounder VAD With BaseEN54-23 Detector Base Sounder Strobe is a high-quality loop powered device intended to alert building occupants of a potential fire. Approved to meet EN54-23 the European standard for Visual Alarm Devices it utilizes the System Sensor B501AP base for enhanced installation flexibility and integrates seamlessly with System Sensor intelligent detectors. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of sound output levels and tones make the device suitable for a wide variety of applications.Key FeaturesIncludes B501AP baseHigh output LED technology ensures optimum light output and low power requirementsHigh efficiency piezo disk and horn profile generate powerful sound outputFeatures Advanced protocol controllable sound output tone selection group polling independent sound or strobe functionAutomatic synchronization of sounder and strobeLarge cable accessRear or surface cable entryLoop continuity springSimple twist fit onto universal B501AP base positive poke yoke engagement - base includedAnti-tamper featureIn-built isolation optionsAddress tag for clear indicationSingle point of installation saves time cost inventoryLow current draw enables more devices on loopAdjustable volume control on device or from panelRotary wheels for clear address indicationClear lens with red flash

GBP 32.89

1

System Sensor WSS-PR-I00 Wall Mounted Sounder Strobe With Isolator - White Skirt

System Sensor WSS-PR-I00 Wall Mounted Sounder Strobe With Isolator - White SkirtThe WSS-PR-I00 is a wall mounted sounder strobe with integral isolator.The beacon has fast and simple installation and is control powered by the fire panel via the loop wiring. The control of the device is enabled using on-board switches or via the digital protocol using the control panel.Key FeaturesWall Mounted Addressable Sounder StrobeColour White Body Red LensIntegral IsolatorFast and simple installationPlease note This product is not approved to EN54-23 Visual Alarm Device and must not be used as a visual alarm device to provide a primary warning notification of fire.

GBP 86.93

1

System Sensor Agile Wireless Network Repeater M200F-RF

System Sensor Agile Wireless Network Repeater M200F-RF The System Sensor M200F-RF is a wireless network repeater unit from the Agile range of wireless fire system equipment. This device is designed to communicate with the System Sensor Agile range of wireless fire system devices.The Agile wireless platform is powered by robust mesh network technology providing up to two communication paths to each wireless device. This makes the network highly reliable protecting against broken communication links. Mesh network technology enables flexible and economic installations in a wide variety of building footprints.Please contact us for pricing and commissioning services on the System Sensor Agile wireless system equipment.

GBP 219.64

1

System Sensor WSS-PC-N00 Wall Mounted Sounder VAD Clear Lens with Red Flash

System Sensor WSS-PC-N00 Wall Mounted Sounder VAD Clear Lens with Red FlashIt utilises the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounder and strobeCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panelPositive poke yoke engagementAddress tag for clear indicationAnti-tamper featureSimple familiar rotary wheel address controls

GBP 78.01

1

System Sensor WSF-RR-RF Wall Mounted Addressable Wireless VAD - RedRed

System Sensor WSF-RR-RF Wall Mounted Addressable Wireless VAD - RedRedThe Agile Wireless Sounder Strobe forms part of the Agile range of products that cover a wide range of applications where wiring is undesired.The Agile Wireless Fire Detection System is a newly designed platform of wireless fire devices suitable for all applications where wired fire devices cannot be installed for economic or aesthetic reasons. The new wireless platform is powered by robust MESH network technology providing REDUNDANT communication paths to each wireless device. This makes the network highly reliable protecting against broken communication links. All operations for the design configuration and diagnostics of the systems are greatly simplified thanks to the AgileIQ software suite specifically designed to support AGILE throughout the whole lifecycle of the product.Key FeaturesMesh multiple communication paths for increased reliabilityEN54-23 VAD approvedLight coverage W-3.5-1005 Hz Red Flashing VAD with up to 350mc of coverageConsistent sound performance like wired sounder 100dBA max SPL32 user selectable tones through Agile IQDynamic tone selection through Advanced protocol commandsIP21 protection from water and dust entrance18RF channels at 868MHz provides greater tolerance to interference2 integrated antennas on each wireless fire device easier positioning of devicesUp to 400 m free air communication range providing good coverage levelsAverage 5 year battery service life reducing maintenance requirementsAddresses set using rotary switches reduced commissioning timeTamper-resist locking mechanism to prevent unauthorised removal of device from its baseWired fire devices look and feel easier installation and visual integrationPatented battery service life prediction feature more proactive maintenancePeace of mind battery redundancy delivering always on performanceUp to 32 Wireless devices per GatewayAgile IQ 3-in-1 software for easy design configuration and diagnostics

GBP 297.43

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)