the solid earth an introduction to global geophysics from GBP 20 | See the cheapest prices and offers on css.lazzaweb.dk

System Sensor M210E-B Single Input Monitor Module With M200E-SMB

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor M210E-B Single Input Monitor Module With M200E-SMBProvides single channel monitoring of normally open contact fire alarm and supervisory devices. The M210E has a single tri-colour greenredyellow LED which can be set by panel command to pulse green each time the module is polled. In case of an alarm the panel can switch the red indicator on continuously.The Yellow LED is controlled by the module and blinks to indicate an open circuit on the input circuit. This fault indication is overridden by a panel command to turn the red LED on.Key FeaturesComes withM200E-SMB for surface mounting

GBP 56.24

1

System Sensor M501MEA Mini Input Module

System Sensor M501MEA Mini Input ModuleThe M501MEA is an addressable input module. It will interface with contact devices such as security contacts waterflow switches and call points. It is capable of being collected in Class B wiring configurations. It provides a two-wire initiation circuit for normally open contact fire alarm and security devices. In addition to transmitting the supervised state of the monitored device normal open or short the full analogue supervision measurement is sent back to the panel.The compact size allows it to fit inside devices or conjunction boxes behind devices. Its size and lightweight allows it to be installed without the need to be rigidly mounted. When the proprietary Series 200 Advanced Protocol is enabled a number of features become available namely the advanced feature to determine alarms or troubles in a reduced time. An extended 3-year warranty covers all System Sensor products.

GBP 58.52

1

System Sensor M201E-B Output Control Module With M200E-SMB

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor M201E-B Output Control Module With M200E-SMBThe M201E provides a single output that can be switched when commanded by a fire alarm control panel. In the supervised mode the M201E supervises the wiring to the load devices. Upon command from the fire alarm control panel the M201E switches an external power supply to operate these devices while de-activating the load supervision.The module raises an unlatched fault condition if the external power supply voltage falls below the fixed threshold. In the unsupervised mode the M201E provides one set of form C changeover contacts and does not provide load nor power supply supervision. The M201E has built-in short circuit protection for the communications loop which may be selecteddeselected to meet the specific requirements of each installation.Key FeaturesComes withM200E-SMBfor surface mounting

GBP 58.97

1

Notifier ECO1005A ECO Rate of Rise Temperature Detector

Notifier ECO1005A ECO Rate of Rise Temperature DetectorThe ECO1005 A thermal detector belongs to System Sensors ECO1000 range of detectors. ECO1000 is a range of conventional detectors which have been produced using the latest in manufacturing technology and supplied with an array of advanced features making them better by design.The ECO1005 A thermal detector uses a state of the art thermal element combined with an application specific integrated circuit ASIC to provide quick and accurate detection of fires. The detector incorporates both rate of rise and static elements and is suitable for all areas where the ambient conditions do not normally exhibit rapid changes in temperature.Key FeaturesLow profile designLow current draw58C operating temperatureOperates at 12 and 24VDCRemote alarm test featureEasy MaintenanceApproved to EN54 52000 Class A1RApproved to MED 9698EC Amendment 200926ECExtended warranty

GBP 21.01

1

System Sensor M220EA Dual Input or Monitor Module

System Sensor M220EA Dual Input or Monitor ModuleThe wired range of Input Output modules has been redesigned to address its microcontroller obsolescence and grant full backward-compatibility.The M220EA monitors one or two sets of normally open contacts and has two tri-colour LED indicators One for each channel. The fire panel can be configured to switch the relevant channel indicator on red in the event of an alarm on an input channel. The indicators can be set by panel command to pulse green each time the module channel is polled. The relevant indicator blinks yellow if the module detects an open-circuit on the input circuit.This module features automatic fault supervision and a built-in isolator on the analogue addressable circuit. The isolator may be bypassed.Two mounting holes and a pair of DIN rail clips allow the module to be installed in any type of enclosure including a purpose-built surface-mount box M200E-SMB. The indicator LEDs and address switches are accessible and visible in both DIN-rail and surface mount installations.Key FeaturesIndividually addressable by the fire panelInput circuits supervised for open-circuit faultsTri-colour indicator LEDs visible from front and one sideAutomatic detection of short-circuits on AA circuitAA circuit short-circuit isolatorOptional isolator bypassScrewdriver operated rotary address switches accessible from front and one sideClips for top hat 35 mm DIN railTwo mounting holesUp to 99 module addresses per AA circuit F220 F100AUses two addresses on the analogue addressable circuitPlease note This product requires the M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails.

GBP 86.75

1

Notifier ECO1005TA ECO 58 Fixed Temperature Detector

Notifier ECO1005TA ECO 58 Fixed Temperature DetectorThe ECO1005T A thermal detector belongs to System Sensors ECO1000 range of detectors. ECO1000 is a range of conventional detectors which have been produced using the latest in manufacturing technology and supplied with an array of advanced features making them better by design.The ECO1005T A thermal detector uses a state of the art thermal element combined with an application specific integrated circuit ASIC to provide quick and accurate detection of fires. The detector incorporates a static element and is suitable where ambient conditions normally exhibit rapid changes in temperature e.g. kitchensKey FeaturesLow profile designLow current draw58C operating temperatureOperates at 12 and 24VDCRemote alarm test featureEasy MaintenanceApproved to EN54 52000 Class A2SApproved to MED 9698EC Amendment 200926ECExtended warranty

GBP 20.20

1

System Sensor WSO-PR-I00 Wall Mounted Red Sounder with Loop Isolation

System Sensor WSO-PR-I00 Wall Mounted Red Sounder with Loop IsolationWall mount sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many marketsAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 55.08

1

System Sensor WSO-PP-I00 Wall Mounted White Sounder with Loop Isolation

System Sensor WSO-PP-I00 Wall Mounted White Sounder with Loop IsolationWall mount sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many marketsAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 61.27

1

System Sensor WSO-PP-N00 Wall Mounted White Sounder

System Sensor WSO-PP-N00 Wall Mounted White SounderWall mount sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many marketsAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 50.95

1

System Sensor WSO-PR-N00 Wall Mounted Red Sounder

System Sensor WSO-PR-N00 Wall Mounted Red SounderWall mount sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many marketsAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 47.51

1

System Sensor WSO-PR-N00-B Wall Mounted Red Sounder With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor WSO-PR-N00-B Wall Mounted Red Sounder With BaseWall mount sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesIncludes B501AP baseLarge cable accessRear or surface cable entryLoop continuity springCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many marketsAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 50.81

1

System Sensor WSO-PP-N00-B Wall Mounted White Sounder With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor WSO-PP-N00-B Wall Mounted White Sounder With BaseWall mount sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesIncludes B501AP baseLarge cable accessRear or surface cable entryLoop continuity springCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many marketsAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 54.43

1

System Sensor BSO-PP-N00-B Base Sounder With Base

Please note The price of this product including the base is a special promotional offer directly from the manufacturer.System Sensor BSO-PP-N00-B Base Sounder With BaseBase sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility and integrates seamlessly with SS intelligent detectors. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesIncludes B501AP baseLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounderLow current draw enables more devices on loopAdjustable volume control on device or from panelIntense strobe outputDeep and high IP base optionsPure White or Ivory body coloursCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panel

GBP 35.16

1

System Sensor BSO-PP-I00-B Base Sounder with Loop Isolation With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor BSO-PP-I00-B Base Sounder with Loop Isolation With BaseBase sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility and integrates seamlessly with SS intelligent detectors. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesIncludes B501AP baseLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounderLow current draw enables more devices on loopAdjustable volume control on device or from panelIntense strobe outputDeep and high IP base optionsPure White or Ivory body coloursCommon base with detectors B501AP - includedDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panel

GBP 49.67

1

System Sensor IM-10EA Ten Input Monitor Module

System Sensor IM-10EA Ten Input Monitor ModuleThe IM-10EA Ten Input Monitor Module is intended for use in an intelligent alarm system. Each monitor module is intended to interface between a control panel and normally open contact devices such as pull stations. A common SLC input is used for all modules and the initiating device loops share a common supervisory supply and ground.Otherwise each monitor operates independently from the others. Each module also has panel-controlled tri-colour green red and amber LED indicators. The panel can cause the LEDs to blink latch on or latch off. The module also provides short circuit isolators to prevent shorts on the fire detection and alarm system loop from disabling more than one device on the intelligent loop.

GBP 538.40

1

System Sensor Agile Wireless Photo-Thermal-IR Detector 22051TLE-RF-26

System Sensor Agile Wireless Photo-Thermal-IR Detector 22051TLE-RF-26The 22051TLE multi-criteria multi-sensor Photo Thermal Infra-Red detector PTIR is the environmentally friendly alternative to the ionisation detector a technology that is over sixty years old. The detector offers comparable speed of response to the ionisations technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires.The integration of continual monitoring for all three major elements of a fire enables the 22051TLE respond far more quickly to an actual fire and has the highest immunity to nuisance. The sensing elements of the 22051TLE are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. Agile wireless optical thermal and IR detector for use with the System Sensor Agile wireless system.Key FeaturesUnique true three sensor multi-criteria fire detector incorporating photoelectric thermal and IR sensing elementsFully integrated Infra-Red sensing to support the fire alarm decisionIncludes Series 200 Advanced ProtocolRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibility

GBP 232.72

1

System Sensor 22051TLE-26 Photoelectric Thermal amp Infrared Detector with Isolator

System Sensor 22051TLE-26 Photoelectric Thermal Infrared Detector with IsolatorThe 22051TLE multi-criteria multi-sensor Photo Thermal Infra-Red detector PTIR is the environmentally friendly alternative to the ionisation detector a technology that is over sixty years old. The detector offers comparable speed of response to the ionisations technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires.The integration of continual monitoring for all three major elements of a fire enables the 22051TLE respond far more quickly to an actual fire and has the highest immunity to nuisance. The sensing elements of the 22051TLE are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesUnique true three sensor multi-criteria fire detector incorporating photoelectric thermal and IR sensing elementsFully integrated Infra-Red sensing to support the fire alarm decisionIncludes Series 200 Advanced ProtocolAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 92.95

1

System Sensor 22051TLE-26 Photoelectric Thermal amp Infrared Detector

System Sensor 22051TLE-26 Photoelectric Thermal Infrared DetectorThe 22051TLE multi-criteria multi-sensor Photo Thermal Infra-Red detector PTIR is the environmentally friendly alternative to the ionisation detector a technology that is over sixty years old. The detector offers comparable speed of response to the ionisations technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires.The integration of continual monitoring for all three major elements of a fire enables the 22051TLE respond far more quickly to an actual fire and has the highest immunity to nuisance. The sensing elements of the 22051TLE are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesUnique true three sensor multi-criteria fire detector incorporating photoelectric thermal and IR sensing elementsFully integrated Infra-Red sensing to support the fire alarm decisionIncludes Series 200 Advanced ProtocolAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 77.11

1

System Sensor 52051RE-26 Rate of Rise 58C Heat Detector

System Sensor 52051RE-26 Rate of Rise 58C Heat DetectorThe 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 53.02

1

System Sensor BSO-PP-N00 Base Sounder

System Sensor BSO-PP-N00 Base SounderBase sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility and integrates seamlessly with SS intelligent detectors. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounderLow current draw enables more devices on loopAdjustable volume control on device or from panelIntense strobe outputDeep and high IP base optionsPure White or Ivory body coloursCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panel

GBP 48.12

1

System Sensor BSO-PP-I00 Base Sounder with Loop Isolation

System Sensor BSO-PP-I00 Base Sounder with Loop IsolationBase sounder is a high-quality loop powered device designed to alert building occupants of an emergency. It utilizes the System Sensor B501AP base for improved installation flexibility and integrates seamlessly with SS intelligent detectors. When triggered by the fire panel its powerful sounder gives an audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounderLow current draw enables more devices on loopAdjustable volume control on device or from panelIntense strobe outputDeep and high IP base optionsPure White or Ivory body coloursCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panel

GBP 58.90

1

System Sensor W5A-RP02SG-K013-01 Waterproof Call Point with Isolator

System Sensor W5A-RP02SG-K013-01 Waterproof Call Point with IsolatorThe Addressable outdoor WCP is an IP67 sealed manual call point product. The enhanced environmental protection allows the unit to be installed in many external environments where water and dirt are likely to be present making it a true waterproof and outdoor product. Installation time and ultimately cost are of paramount importance to any fire or security installer. The WCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time.To provide you with the greatest flex-ability the new WCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered. All WCP Outdoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.Full compliance with the latest standards is essential and the new WCP indoor call point range is fully approved to the latest EN54-11 standard. The WCP5A product has the System Sensor protocol embedded. A version of this call point with built in isolation is also available.Key FeaturesSealed to IP67Unique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standards

GBP 235.46

1

System Sensor W5A-RP01SG-K013-01 Waterproof Call Point

System Sensor W5A-RP01SG-K013-01 Waterproof Call PointThe Addressable outdoor WCP is an IP67 sealed manual call point product. The enhanced environmental protection allows the unit to be installed in many external environments where water and dirt are likely to be present making it a true waterproof and outdoor product. Installation time and ultimately cost are of paramount importance to any fire or security installer. The WCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time.To provide you with the greatest flex-ability the new WCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered. All WCP Outdoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm.Full compliance with the latest standards is essential and the new WCP indoor call point range is fully approved to the latest EN54-11 standard. The WCP5A product has the System Sensor protocol embedded. A version of this call point with built in isolation is also available.Key FeaturesSealed to IP67Unique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standards

GBP 218.26

1

System Sensor 52051EI-26 Fixed 58C Heat Detector with Isolator

System Sensor 52051EI-26 Fixed 58C Heat Detector with IsolatorThe 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 60.59

1

System Sensor 52051E-26 Fixed 58C Heat Detector

System Sensor 52051E-26 Fixed 58C Heat DetectorThe 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 45.38

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)