thinking fast and slow from GBP 4 | See the cheapest prices and offers on css.lazzaweb.dk

System Sensor Agile Wireless Photo-Thermal-IR Detector 22051TLE-RF-26

System Sensor Agile Wireless Photo-Thermal-IR Detector 22051TLE-RF-26The 22051TLE multi-criteria multi-sensor Photo Thermal Infra-Red detector PTIR is the environmentally friendly alternative to the ionisation detector a technology that is over sixty years old. The detector offers comparable speed of response to the ionisations technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires.The integration of continual monitoring for all three major elements of a fire enables the 22051TLE respond far more quickly to an actual fire and has the highest immunity to nuisance. The sensing elements of the 22051TLE are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. Agile wireless optical thermal and IR detector for use with the System Sensor Agile wireless system.Key FeaturesUnique true three sensor multi-criteria fire detector incorporating photoelectric thermal and IR sensing elementsFully integrated Infra-Red sensing to support the fire alarm decisionIncludes Series 200 Advanced ProtocolRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibility

GBP 232.72

1

System Sensor WSS-PR-I00 Wall Mounted Sounder Strobe With Isolator - White Skirt

System Sensor WSS-PR-I00 Wall Mounted Sounder Strobe With Isolator - White SkirtThe WSS-PR-I00 is a wall mounted sounder strobe with integral isolator.The beacon has fast and simple installation and is control powered by the fire panel via the loop wiring. The control of the device is enabled using on-board switches or via the digital protocol using the control panel.Key FeaturesWall Mounted Addressable Sounder StrobeColour White Body Red LensIntegral IsolatorFast and simple installationPlease note This product is not approved to EN54-23 Visual Alarm Device and must not be used as a visual alarm device to provide a primary warning notification of fire.

GBP 86.93

1

System Sensor 22051TLE-26 Photoelectric Thermal amp Infrared Detector with Isolator

System Sensor 22051TLE-26 Photoelectric Thermal Infrared Detector with IsolatorThe 22051TLE multi-criteria multi-sensor Photo Thermal Infra-Red detector PTIR is the environmentally friendly alternative to the ionisation detector a technology that is over sixty years old. The detector offers comparable speed of response to the ionisations technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires.The integration of continual monitoring for all three major elements of a fire enables the 22051TLE respond far more quickly to an actual fire and has the highest immunity to nuisance. The sensing elements of the 22051TLE are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesUnique true three sensor multi-criteria fire detector incorporating photoelectric thermal and IR sensing elementsFully integrated Infra-Red sensing to support the fire alarm decisionIncludes Series 200 Advanced ProtocolAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 92.95

1

System Sensor 22051TLE-26 Photoelectric Thermal amp Infrared Detector

System Sensor 22051TLE-26 Photoelectric Thermal Infrared DetectorThe 22051TLE multi-criteria multi-sensor Photo Thermal Infra-Red detector PTIR is the environmentally friendly alternative to the ionisation detector a technology that is over sixty years old. The detector offers comparable speed of response to the ionisations technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires.The integration of continual monitoring for all three major elements of a fire enables the 22051TLE respond far more quickly to an actual fire and has the highest immunity to nuisance. The sensing elements of the 22051TLE are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesUnique true three sensor multi-criteria fire detector incorporating photoelectric thermal and IR sensing elementsFully integrated Infra-Red sensing to support the fire alarm decisionIncludes Series 200 Advanced ProtocolAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 77.11

1

System Sensor CUPHWKIT Cup for Setup and Maintenance of Agile Wireless Detectors

System Sensor CUPHWKIT Cup for Setup and Maintenance of Agile Wireless DetectorsThis product is ideal for assisting with the setup and maintenance of System Sensor Agile range of wireless fire alarm system detectors. They are designed for use with telescopic pole POLE HWKIT.

GBP 224.45

1

System Sensor M221EA Dual Input and Single Control Output Combination Module

System Sensor M221EA Dual Input and Single Control Output Combination ModuleThe System Sensor M200 wired range of Input Output modules has been redesigned to address its microcontroller obsolescence and grant full backward-compatibility.The new M200 look and feel combine maximum reliability with top-end functionality. Their unique mechanical design allows each module to be mounted in either a common wall box on a DIN rail or its dedicated enclosure.Key FeaturesCommon mechanical platform for modules enclosureLow standby currentFACP reads module power voltageHigh Power Loop 48V readyBuilt-in short circuit isolatorsAddressability through rotary switchesTri-colour Light PipeImproved Light Pipe visibility on two sidesPlug-in field wiring terminalsIntegrated DIN rail bracketsLasered engraved label dataIP rate 30Intertek ApprovedPlease note This product requires the M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails.

GBP 128.75

1

System Sensor 52051RE-26 Rate of Rise 58C Heat Detector

System Sensor 52051RE-26 Rate of Rise 58C Heat DetectorThe 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 53.02

1

System Sensor 52051E-26 Fixed 58C Heat Detector

System Sensor 52051E-26 Fixed 58C Heat DetectorThe 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 45.38

1

System Sensor 52051HTE-26 High Temperature Fixed 78C Heat Detector

System Sensor 52051HTE-26 High Temperature Fixed 78C Heat DetectorThe 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 53.02

1

System Sensor 52051EI-26 Fixed 58C Heat Detector with Isolator

System Sensor 52051EI-26 Fixed 58C Heat Detector with IsolatorThe 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 60.59

1

System Sensor 52051E-26-B Fixed 58C Heat Detector With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor 52051E-26-B Fixed 58C Heat Detector With BaseThe 52051E and 52051HTE are fixed temperature analogue addressable sensors employing low mass thermistors and microprocessor technology for fast response and linear temperature sensing. Their linear response allows these sensors to be used to signal temperatures over the range of 58 degrees class A1S to 78 degrees Class BS.The 52051RE uses the same thermistor and microprocessor technology to provide an alarm when the rate of rise in temperature exceeds 10 degreeminute typical or if the temperature exceeds a threshold of 58 degrees. With the implementation of the Series 200 Advanced Protocol any model can be software configures to be wither a fixed 58 degree a fixed 78 degree unit or a 58 degree with rate of rise device. For backwards compatibility and approval continuity three separate versions continue to be available as separate part numbers.The sensing elements of all three heat sensors are panel controllable through the Series 200 Advanced Protocol so the sensitivity threshold of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesIncludes B501AP baseIncludes Series 200 Advanced Protocol and the ability to customise the heat threshold of each detector to the specific risks found in the applicationAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector - included

GBP 30.84

1

System Sensor B501AP Analogue Sensor Base Pure White

System Sensor B501AP Analogue Sensor Base Pure WhiteThe System Sensor B504AP is an analogue sensor base with SEMS screw connections for isolated and non-isolated detectors and address identification label.The B501AP Base is designed to accept S200 detectors and has a tamper resistant feature which can be enabled by breaking off a plastic tab. When enabled the detector cannot be removed without a suitable tool. The base can be labelled with a break-off address tag. Available in white ivory and black colours.

GBP 4.13

1

System Sensor WSS-PC-N00 Wall Mounted Sounder VAD Clear Lens with Red Flash

System Sensor WSS-PC-N00 Wall Mounted Sounder VAD Clear Lens with Red FlashIt utilises the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounder and strobeCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panelPositive poke yoke engagementAddress tag for clear indicationAnti-tamper featureSimple familiar rotary wheel address controls

GBP 78.01

1

System Sensor IM-10EA Ten Input Monitor Module

System Sensor IM-10EA Ten Input Monitor ModuleThe IM-10EA Ten Input Monitor Module is intended for use in an intelligent alarm system. Each monitor module is intended to interface between a control panel and normally open contact devices such as pull stations. A common SLC input is used for all modules and the initiating device loops share a common supervisory supply and ground.Otherwise each monitor operates independently from the others. Each module also has panel-controlled tri-colour green red and amber LED indicators. The panel can cause the LEDs to blink latch on or latch off. The module also provides short circuit isolators to prevent shorts on the fire detection and alarm system loop from disabling more than one device on the intelligent loop.

GBP 538.40

1

System Sensor Agile Wireless Optical Smoke Detector 22051E-RF-26

System Sensor Agile Wireless Optical Smoke Detector 22051E-RF-26The 22051 photoelectric smoke detector has a completely new detection chamber design the result of many years of research and design. This delivers improved responsiveness reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris. Wireless optical smoke detector for the System Sensor agile wireless system.Key FeaturesNew mechanical platform with revolutionary chamber offering improved false alarm immunityIncludes Series 200 Advanced ProtocolTri colour LED offering red green or amber coloursPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityPowered by 4x CR123A 3v batteries

GBP 187.96

1

System Sensor DSS-PC-I00 Base Sounder VAD with Loop Isolation

System Sensor DSS-PC-I00 Base Sounder VAD with Loop IsolationEN54-23 Detector Base Sounder Strobe is a high-quality loop powered device intended to alert building occupants of a potential fire. Approved to meet EN54-23 the European standard for Visual Alarm Devices it utilizes the System Sensor B501AP base for enhanced installation flexibility and integrates seamlessly with System Sensor intelligent detectors.When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of sound output levels and tones make the device suitable for a wide variety of applications.Key FeaturesHigh output LED technology ensures optimum light output and low power requirementsHigh efficiency piezo disk and horn profile generate powerful sound outputFeatures Advanced protocol controllable sound output tone selection group polling independent sound or strobe functionAutomatic synchronization of sounder and strobeLarge cable accessRear or surface cable entryLoop continuity springSimple twist fit onto universal B501AP base positive poke yoke engagementAnti-tamper featureIn-built isolation optionsAddress tag for clear indicationSingle point of installation saves time cost inventoryLow current draw enables more devices on loopAdjustable volume control on device or from panelRotary wheels for clear address indicationClear lens with red flash

GBP 93.70

1

System Sensor DSS-PC-N00 Base Sounder VAD

System Sensor DSS-PC-N00 Base Sounder VADEN54-23 Detector Base Sounder Strobe is a high-quality loop powered device intended to alert building occupants of a potential fire. Approved to meet EN54-23 the European standard for Visual Alarm Devices it utilizes the System Sensor B501AP base for enhanced installation flexibility and integrates seamlessly with System Sensor intelligent detectors. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of sound output levels and tones make the device suitable for a wide variety of applications.Key FeaturesHigh output LED technology ensures optimum light output and low power requirementsHigh efficiency piezo disk and horn profile generate powerful sound outputFeatures Advanced protocol controllable sound output tone selection group polling independent sound or strobe functionAutomatic synchronization of sounder and strobeLarge cable accessRear or surface cable entryLoop continuity springSimple twist fit onto universal B501AP base positive poke yoke engagementAnti-tamper featureIn-built isolation optionsAddress tag for clear indicationSingle point of installation saves time cost inventoryLow current draw enables more devices on loopAdjustable volume control on device or from panelRotary wheels for clear address indicationClear lens with red flash

GBP 76.56

1

Notifier ECO1005A ECO Rate of Rise Temperature Detector

Notifier ECO1005A ECO Rate of Rise Temperature DetectorThe ECO1005 A thermal detector belongs to System Sensors ECO1000 range of detectors. ECO1000 is a range of conventional detectors which have been produced using the latest in manufacturing technology and supplied with an array of advanced features making them better by design.The ECO1005 A thermal detector uses a state of the art thermal element combined with an application specific integrated circuit ASIC to provide quick and accurate detection of fires. The detector incorporates both rate of rise and static elements and is suitable for all areas where the ambient conditions do not normally exhibit rapid changes in temperature.Key FeaturesLow profile designLow current draw58C operating temperatureOperates at 12 and 24VDCRemote alarm test featureEasy MaintenanceApproved to EN54 52000 Class A1RApproved to MED 9698EC Amendment 200926ECExtended warranty

GBP 21.01

1

System Sensor WSS-PR-N00 Wall Mounted Sounder VID - White Skirt

System Sensor WSS-PR-N00 Wall Mounted Sounder VID - White SkirtThe sounder VID visual indicating device utilises the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesThis product is not EN54-23 approved so cant be used as a VADEN54-3 approvedLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounder and strobeCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panelPositive poke yoke engagementAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 86.93

1

System Sensor M220EA Dual Input or Monitor Module

System Sensor M220EA Dual Input or Monitor ModuleThe wired range of Input Output modules has been redesigned to address its microcontroller obsolescence and grant full backward-compatibility.The M220EA monitors one or two sets of normally open contacts and has two tri-colour LED indicators One for each channel. The fire panel can be configured to switch the relevant channel indicator on red in the event of an alarm on an input channel. The indicators can be set by panel command to pulse green each time the module channel is polled. The relevant indicator blinks yellow if the module detects an open-circuit on the input circuit.This module features automatic fault supervision and a built-in isolator on the analogue addressable circuit. The isolator may be bypassed.Two mounting holes and a pair of DIN rail clips allow the module to be installed in any type of enclosure including a purpose-built surface-mount box M200E-SMB. The indicator LEDs and address switches are accessible and visible in both DIN-rail and surface mount installations.Key FeaturesIndividually addressable by the fire panelInput circuits supervised for open-circuit faultsTri-colour indicator LEDs visible from front and one sideAutomatic detection of short-circuits on AA circuitAA circuit short-circuit isolatorOptional isolator bypassScrewdriver operated rotary address switches accessible from front and one sideClips for top hat 35 mm DIN railTwo mounting holesUp to 99 module addresses per AA circuit F220 F100AUses two addresses on the analogue addressable circuitPlease note This product requires the M200E-SMB for surface mounting or M200E-DIN for mounting to DIN rails.

GBP 86.75

1

System Sensor WSS-PR-N00 Wall Mounted Sounder VID Red Body with Red Flash

System Sensor WSS-PR-N00 Wall Mounted Sounder VID Red Body with Red FlashThe sounder VID visual indicating device utilises the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesThis product is not EN54-23 approved so cant be used as a VADEN54-3 approvedLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounder and strobeCommon base with detectors B501APDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panelPositive poke yoke engagementAddress tag for clear indicationAnti-tamper featureIn-built isolation optionsSimple familiar rotary wheel address controls

GBP 75.79

1

System Sensor WSS-PC-N00-B Wall Mounted Sounder VAD Clear Lens with Red Flash With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor WSS-PC-N00-B Wall Mounted Sounder VAD Clear Lens with Red Flash With BaseIt utilises the System Sensor B501AP base for improved installation flexibility. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of output levels and tones make the device suitable for a wide variety of applications.Key FeaturesIncludes B501AP baseLarge cable accessRear or surface cable entryLoop continuity springAutomatic synchronisation of sounder and strobeCommon base with detectors B501AP - includedDevice protocol is backward compatible through inclusion of both SS CLIP and Advanced Protocols32 tone selection to cover many markets on device or from panelPositive poke yoke engagementAddress tag for clear indicationAnti-tamper featureSimple familiar rotary wheel address controls

GBP 70.31

1

System Sensor M5A-RP01FG-K013-01 Glass Manual Call Point

System Sensor M5A-RP01FG-K013-01 Glass Manual Call PointAddressable installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only. The MCP5A product has the Advanced Protocol embedded.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 48.89

1

System Sensor M5A-RP02FF-K013-01 Flexible Manual Call Point with Isolator

System Sensor M5A-RP02FF-K013-01 Flexible Manual Call Point with IsolatorInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only. The MCP5A product has the Advanced Protocol embedded.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 61.27

1

System Sensor M5A-RP01FF-K013-01 Flexible Manual Call Point

System Sensor M5A-RP01FF-K013-01 Flexible Manual Call PointInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only. The MCP5A product has the Advanced Protocol embedded.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 50.26

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)