sonic bomb alarm clock from GBP 20 | See the cheapest prices and offers on css.lazzaweb.dk

System Sensor POLEHWKIT Telescopic Access Pole

System Sensor POLEHWKIT Telescopic Access Pole TheSystem Sensor POLE HWKIT is a telescopic access pole for Agile system.It is designed to aid the setup and maintenance of the Agile wireless fire alarm system devices.Key FeaturesExtends from 1.5 to 5.2m in length.

GBP 456.48

1

System Sensor CUPHWKIT Cup for Setup and Maintenance of Agile Wireless Detectors

System Sensor CUPHWKIT Cup for Setup and Maintenance of Agile Wireless DetectorsThis product is ideal for assisting with the setup and maintenance of System Sensor Agile range of wireless fire alarm system detectors. They are designed for use with telescopic pole POLE HWKIT.

GBP 224.45

1

System Sensor WSS-PR-I00 Wall Mounted Sounder Strobe With Isolator - White Skirt

System Sensor WSS-PR-I00 Wall Mounted Sounder Strobe With Isolator - White SkirtThe WSS-PR-I00 is a wall mounted sounder strobe with integral isolator.The beacon has fast and simple installation and is control powered by the fire panel via the loop wiring. The control of the device is enabled using on-board switches or via the digital protocol using the control panel.Key FeaturesWall Mounted Addressable Sounder StrobeColour White Body Red LensIntegral IsolatorFast and simple installationPlease note This product is not approved to EN54-23 Visual Alarm Device and must not be used as a visual alarm device to provide a primary warning notification of fire.

GBP 86.93

1

System Sensor M210E-B Single Input Monitor Module With M200E-SMB

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor M210E-B Single Input Monitor Module With M200E-SMBProvides single channel monitoring of normally open contact fire alarm and supervisory devices. The M210E has a single tri-colour greenredyellow LED which can be set by panel command to pulse green each time the module is polled. In case of an alarm the panel can switch the red indicator on continuously.The Yellow LED is controlled by the module and blinks to indicate an open circuit on the input circuit. This fault indication is overridden by a panel command to turn the red LED on.Key FeaturesComes withM200E-SMB for surface mounting

GBP 56.24

1

System Sensor IM-10EA Ten Input Monitor Module

System Sensor IM-10EA Ten Input Monitor ModuleThe IM-10EA Ten Input Monitor Module is intended for use in an intelligent alarm system. Each monitor module is intended to interface between a control panel and normally open contact devices such as pull stations. A common SLC input is used for all modules and the initiating device loops share a common supervisory supply and ground.Otherwise each monitor operates independently from the others. Each module also has panel-controlled tri-colour green red and amber LED indicators. The panel can cause the LEDs to blink latch on or latch off. The module also provides short circuit isolators to prevent shorts on the fire detection and alarm system loop from disabling more than one device on the intelligent loop.

GBP 538.40

1

System Sensor M201E-B Output Control Module With M200E-SMB

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor M201E-B Output Control Module With M200E-SMBThe M201E provides a single output that can be switched when commanded by a fire alarm control panel. In the supervised mode the M201E supervises the wiring to the load devices. Upon command from the fire alarm control panel the M201E switches an external power supply to operate these devices while de-activating the load supervision.The module raises an unlatched fault condition if the external power supply voltage falls below the fixed threshold. In the unsupervised mode the M201E provides one set of form C changeover contacts and does not provide load nor power supply supervision. The M201E has built-in short circuit protection for the communications loop which may be selecteddeselected to meet the specific requirements of each installation.Key FeaturesComes withM200E-SMBfor surface mounting

GBP 58.97

1

System Sensor Agile Wireless Optical Smoke Detector 22051E-RF-26

System Sensor Agile Wireless Optical Smoke Detector 22051E-RF-26The 22051 photoelectric smoke detector has a completely new detection chamber design the result of many years of research and design. This delivers improved responsiveness reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris. Wireless optical smoke detector for the System Sensor agile wireless system.Key FeaturesNew mechanical platform with revolutionary chamber offering improved false alarm immunityIncludes Series 200 Advanced ProtocolTri colour LED offering red green or amber coloursPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityPowered by 4x CR123A 3v batteries

GBP 187.96

1

System Sensor 22051E-RF-26 Agile Photo Detector

System Sensor 22051E-RF-26 Agile Photo Detector - Wireless Optical Smoke Detector for the Agile Wireless SystemThe 22051E-RF-26 is a photoelectric smoke detector for the Agile Wireless System. It has a completely new detection chamber design the result of many years of research and design. This delivers improved responsiveness reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris. Wireless optical smoke detector for the System Sensor agile wireless system.Key FeaturesNew mechanical platform with revolutionary chamber offering improved false alarm immunityIncludes Series 200 Advanced ProtocolTri colour LED offering red green or amber coloursPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityPowered by 4x CR123A 3v batteries

GBP 187.96

1

Notifier ECO1005TA ECO 58 Fixed Temperature Detector

Notifier ECO1005TA ECO 58 Fixed Temperature DetectorThe ECO1005T A thermal detector belongs to System Sensors ECO1000 range of detectors. ECO1000 is a range of conventional detectors which have been produced using the latest in manufacturing technology and supplied with an array of advanced features making them better by design.The ECO1005T A thermal detector uses a state of the art thermal element combined with an application specific integrated circuit ASIC to provide quick and accurate detection of fires. The detector incorporates a static element and is suitable where ambient conditions normally exhibit rapid changes in temperature e.g. kitchensKey FeaturesLow profile designLow current draw58C operating temperatureOperates at 12 and 24VDCRemote alarm test featureEasy MaintenanceApproved to EN54 52000 Class A2SApproved to MED 9698EC Amendment 200926ECExtended warranty

GBP 20.20

1

Notifier ECO1005A ECO Rate of Rise Temperature Detector

Notifier ECO1005A ECO Rate of Rise Temperature DetectorThe ECO1005 A thermal detector belongs to System Sensors ECO1000 range of detectors. ECO1000 is a range of conventional detectors which have been produced using the latest in manufacturing technology and supplied with an array of advanced features making them better by design.The ECO1005 A thermal detector uses a state of the art thermal element combined with an application specific integrated circuit ASIC to provide quick and accurate detection of fires. The detector incorporates both rate of rise and static elements and is suitable for all areas where the ambient conditions do not normally exhibit rapid changes in temperature.Key FeaturesLow profile designLow current draw58C operating temperatureOperates at 12 and 24VDCRemote alarm test featureEasy MaintenanceApproved to EN54 52000 Class A1RApproved to MED 9698EC Amendment 200926ECExtended warranty

GBP 21.01

1

System Sensor M501MEA Mini Input Module

System Sensor M501MEA Mini Input ModuleThe M501MEA is an addressable input module. It will interface with contact devices such as security contacts waterflow switches and call points. It is capable of being collected in Class B wiring configurations. It provides a two-wire initiation circuit for normally open contact fire alarm and security devices. In addition to transmitting the supervised state of the monitored device normal open or short the full analogue supervision measurement is sent back to the panel.The compact size allows it to fit inside devices or conjunction boxes behind devices. Its size and lightweight allows it to be installed without the need to be rigidly mounted. When the proprietary Series 200 Advanced Protocol is enabled a number of features become available namely the advanced feature to determine alarms or troubles in a reduced time. An extended 3-year warranty covers all System Sensor products.

GBP 58.52

1

System Sensor 22051TE-26 Multi-Sensor Detector

System Sensor 22051TE-26 Multi-Sensor DetectorThe multi-criteria multi-sensor 22051TE Photo Thermal detector uses thermal assistance to the core photoelectric smoke detector to give enhanced false alarm immunity and faster response to a wide range of incipient fires.The plug-in unit combines two separate sensing elements that are managed by embedded software to act as a single unit. The 22051TE conforms to EN54-5 a 58C fixed temperature and rate of rise thermal with the smoke detection element conforming to EN54-7.Key FeaturesTwo sensor multi-criteria fire detector incorporating photoelectric and thermal sensing elementsNew mechanical platform with revolutionary chamberIncludes Series 200 Advanced ProtocolAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew Base design to compliment the detector

GBP 59.21

1

System Sensor 22051EI-26 Photoelectric Optical Smoke Sensor with Isolator

System Sensor 22051EI-26 Photoelectric Optical Smoke Sensor with IsolatorThe 22051 photoelectric smoke detector has a completely new detection chamber design the result of many years of research and design. This delivers improved responsiveness reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris.The plug-in unit uses sophisticated processing circuitry that incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms. The devices are managed by embedded software running complex algorithms that further improve resilience to false alarms and improve detection speed.Key FeaturesNew mechanical platform with revolutionary chamber offering improved false alarm immunityIncludes Series 200 Advanced ProtocolAvailable with or without single pole circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green or amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 46.13

1

System Sensor 22051E-26 Photoelectric Optical Smoke Sensor

System Sensor 22051E-26 Photoelectric Optical Smoke SensorThe 22051 photoelectric smoke detector has a completely new detection chamber design the result of many years of research and design. This delivers improved responsiveness reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris.The plug-in unit uses sophisticated processing circuitry that incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms. The devices are managed by embedded software running complex algorithms that further improve resilience to false alarms and improve detection speed.Key FeaturesNew mechanical platform with revolutionary chamber offering improved false alarm immunityIncludes Series 200 Advanced ProtocolAvailable with or without single pole circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green or amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 43.24

1

System Sensor 22051TEI-26 Multi-Sensor Detector with Isolator

System Sensor 22051TEI-26 Multi-Sensor Detector with IsolatorThe multi-criteria multi-sensor 22051TE Photo Thermal detector uses thermal assistance to the core photoelectric smoke detector to give enhanced false alarm immunity and faster response to a wide range of incipient fires.The plug-in unit combines two separate sensing elements that are managed by embedded software to act as a single unit. The 22051TE conforms to EN54-5 a 58C fixed temperature and rate of rise thermal with the smoke detection element conforming to EN54-7.Key FeaturesTwo sensor multi-criteria fire detector incorporating photoelectric and thermal sensing elementsNew mechanical platform with revolutionary chamberIncludes Series 200 Advanced ProtocolAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew Base design to compliment the detector

GBP 79.18

1

System Sensor 22051TE-26-B Multi-Sensor Detector With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor 22051TE-26-B Multi-Sensor Detector With BaseThe multi-criteria multi-sensor 22051TE Photo Thermal detector uses thermal assistance to the core photoelectric smoke detector to give enhanced false alarm immunity and faster response to a wide range of incipient fires.The plug-in unit combines two separate sensing elements that are managed by embedded software to act as a single unit. The 22051TE conforms to EN54-5 a 58C fixed temperature and rate of rise thermal with the smoke detection element conforming to EN54-7.Key FeaturesIncludes B501AP baseTwo sensor multi-criteria fire detector incorporating photoelectric and thermal sensing elementsNew mechanical platform with revolutionary chamberIncludes Series 200 Advanced ProtocolAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew Base design to compliment the detector - included

GBP 39.80

1

System Sensor 22051E-26-B Photoelectric Optical Smoke Sensor With Base

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.System Sensor 22051E-26 Photoelectric Optical Smoke SensorWith BaseThe 22051E-26-B photoelectric smoke detector has a completely new detection chamber design the result of many years of research and design. This delivers improved responsiveness reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris.The plug-in unit uses sophisticated processing circuitry that incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms. The devices are managed by embedded software running complex algorithms that further improve resilience to false alarms and improve detection speed.Key FeaturesIncludes B501AP baseNew mechanical platform with revolutionary chamber offering improved false alarm immunityIncludes Series 200 Advanced ProtocolAvailable with or without single pole circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green or amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector - included

GBP 30.96

1

System Sensor DSS-PC-N00 Base Sounder VAD

System Sensor DSS-PC-N00 Base Sounder VADEN54-23 Detector Base Sounder Strobe is a high-quality loop powered device intended to alert building occupants of a potential fire. Approved to meet EN54-23 the European standard for Visual Alarm Devices it utilizes the System Sensor B501AP base for enhanced installation flexibility and integrates seamlessly with System Sensor intelligent detectors. When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of sound output levels and tones make the device suitable for a wide variety of applications.Key FeaturesHigh output LED technology ensures optimum light output and low power requirementsHigh efficiency piezo disk and horn profile generate powerful sound outputFeatures Advanced protocol controllable sound output tone selection group polling independent sound or strobe functionAutomatic synchronization of sounder and strobeLarge cable accessRear or surface cable entryLoop continuity springSimple twist fit onto universal B501AP base positive poke yoke engagementAnti-tamper featureIn-built isolation optionsAddress tag for clear indicationSingle point of installation saves time cost inventoryLow current draw enables more devices on loopAdjustable volume control on device or from panelRotary wheels for clear address indicationClear lens with red flash

GBP 76.56

1

System Sensor DSS-PC-I00 Base Sounder VAD with Loop Isolation

System Sensor DSS-PC-I00 Base Sounder VAD with Loop IsolationEN54-23 Detector Base Sounder Strobe is a high-quality loop powered device intended to alert building occupants of a potential fire. Approved to meet EN54-23 the European standard for Visual Alarm Devices it utilizes the System Sensor B501AP base for enhanced installation flexibility and integrates seamlessly with System Sensor intelligent detectors.When triggered by the fire panel its powerful sounder and intense strobe give a visible and audible warning. A choice of sound output levels and tones make the device suitable for a wide variety of applications.Key FeaturesHigh output LED technology ensures optimum light output and low power requirementsHigh efficiency piezo disk and horn profile generate powerful sound outputFeatures Advanced protocol controllable sound output tone selection group polling independent sound or strobe functionAutomatic synchronization of sounder and strobeLarge cable accessRear or surface cable entryLoop continuity springSimple twist fit onto universal B501AP base positive poke yoke engagementAnti-tamper featureIn-built isolation optionsAddress tag for clear indicationSingle point of installation saves time cost inventoryLow current draw enables more devices on loopAdjustable volume control on device or from panelRotary wheels for clear address indicationClear lens with red flash

GBP 93.70

1

System Sensor M5A-RP02FG-K013-01 Glass Manual Call Point with Isolator

System Sensor M5A-RP02FG-K013-01 Glass Manual Call Point with IsolatorInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only. The MCP5A product has the Advanced Protocol embedded.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 61.27

1

System Sensor M5A-RP02FF-K013-01 Flexible Manual Call Point with Isolator

System Sensor M5A-RP02FF-K013-01 Flexible Manual Call Point with IsolatorInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only. The MCP5A product has the Advanced Protocol embedded.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 61.27

1

System Sensor Agile Wireless Photo-Thermal-IR Detector 22051TLE-RF-26

System Sensor Agile Wireless Photo-Thermal-IR Detector 22051TLE-RF-26The 22051TLE multi-criteria multi-sensor Photo Thermal Infra-Red detector PTIR is the environmentally friendly alternative to the ionisation detector a technology that is over sixty years old. The detector offers comparable speed of response to the ionisations technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires.The integration of continual monitoring for all three major elements of a fire enables the 22051TLE respond far more quickly to an actual fire and has the highest immunity to nuisance. The sensing elements of the 22051TLE are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting. Agile wireless optical thermal and IR detector for use with the System Sensor Agile wireless system.Key FeaturesUnique true three sensor multi-criteria fire detector incorporating photoelectric thermal and IR sensing elementsFully integrated Infra-Red sensing to support the fire alarm decisionIncludes Series 200 Advanced ProtocolRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibility

GBP 232.72

1

System Sensor M5A-RP01FF-K013-01 Flexible Manual Call Point

System Sensor M5A-RP01FF-K013-01 Flexible Manual Call PointInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only. The MCP5A product has the Advanced Protocol embedded.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 50.26

1

System Sensor M5A-RP01FG-K013-01 Glass Manual Call Point

System Sensor M5A-RP01FG-K013-01 Glass Manual Call PointAddressable installation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP Indoor Call Point range. Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.All MCP Indoor Call Point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going in to alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only. The MCP5A product has the Advanced Protocol embedded.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aesthetics and compact designFully approved to the latest standardsBackward compatibilityCPD Approved

GBP 48.89

1

System Sensor 22051TLE-26 Photoelectric Thermal amp Infrared Detector with Isolator

System Sensor 22051TLE-26 Photoelectric Thermal Infrared Detector with IsolatorThe 22051TLE multi-criteria multi-sensor Photo Thermal Infra-Red detector PTIR is the environmentally friendly alternative to the ionisation detector a technology that is over sixty years old. The detector offers comparable speed of response to the ionisations technology for a fast flaming fire and is less susceptible to false alarms. It can be deployed with confidence in locations where the main risk is from fast-developing flaming fires.The integration of continual monitoring for all three major elements of a fire enables the 22051TLE respond far more quickly to an actual fire and has the highest immunity to nuisance. The sensing elements of the 22051TLE are panel controllable so the sensitivity thresholds of each element can be changed by the panel offering the ability to customise the device for the changing use of the area it is protecting.Key FeaturesUnique true three sensor multi-criteria fire detector incorporating photoelectric thermal and IR sensing elementsFully integrated Infra-Red sensing to support the fire alarm decisionIncludes Series 200 Advanced ProtocolAvailable with or without single pole short circuit isolation with status control through the Series 200 Advanced ProtocolTri colour LED offering red green and amber coloursRotary decade address switchesPure white colour to compliment modern buildings100 mechanical and electrical backwards compatibilityNew base design to compliment the detector

GBP 92.95

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)