31 results (0,17065 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Trend Unibase Universal Sub-Base for Guide Bushes - 170mm

Trend Unibase Universal Sub-Base for Guide Bushes - 170mm

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features: Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting: The line-up pin fits into the collet and is plunged through the router base The line-up bush is fitted into the Unibase and secured This is then placed over the line-up pin and rotated in order to line up the fixing holes The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes These range from 10mm up to 30mm (GB10 - GB32) For larger diameter cutters a 40mm guide bush (GB40) is available Ideal for hinge jig and lock jig Specification: Diameter: 170mm Thickness: 8mm Bore; 39mm Recess: 60mm Screw thread: 2BA

GBP 23.99
1

Trend Anglefix Mitre Guide TREANGLEFIX

Trend Anglefix Mitre Guide TREANGLEFIX

The Trend Anglefix is a must have accessory for quick, accurate mitre saw setup when cutting mitres. It is simple to use, the desired angle is taken by wrapping around the desired internal or external corner. The central metal tab automatically bisects the angle taken for fast setting without any measurements or additional tools. This anglefix is ideal for setting mitre angles for skirting, architrave, dado rails, picture frames, moulding and more. It makes setting angles simplified, speeding up mitre work for trade and hobbyists alike.

GBP 32.99
1

Trend UNIBASE/150 Universal Plunge Router Sub-Base 150mm

Trend UNIBASE/150 Universal Plunge Router Sub-Base 150mm

The Trend Universal Plunge Router Sub-Base unlocks the potential of your router by providing improved concentricity and compatibility with Trend Guide Bushes. Made from reinforced nylon for a low-friction, precise routing surface. The Precision Centring System ensures perfect concentricity between cutter and guide bush for pinpoint accuracy with routing jigs. Reinforced threaded brass inserts provide secure mounting points for guide bushes. The Quick Pattern Finder makes locating the hole pattern for your router quick and easy. A screw pack helps you to find the right screws easily and keeps them neat when not in use.

GBP 31.99
1

Trend Unibase/trim Universal Trim Router Sub-Base 150mm

Trend Unibase/trim Universal Trim Router Sub-Base 150mm

The Trend UNIBASE/TRIM Universal Trim Router Sub-Base unlocks the potential of your router by providing improved concentricity and compatibility with Trend Guide Bushes.With 9 Hole Patterns to suit most 1/4in trim routers, including 18V cordless models.Made from reinforced nylon for a low-friction, precise routing surface.The Precision Centring System ensures perfect concentricity between cutter and guide bush for pinpoint accuracy with routing jigs. Reinforced threaded brass inserts provide secure mounting points for guide bushes. The Quick Pattern Finder makes locating the hole pattern for your router quick and easy. Includes M4 screws for router attachment.

GBP 36.99
1

Trend UNIBASE/180 Universal Plunge Router Sub-Base 180mm

Trend UNIBASE/180 Universal Plunge Router Sub-Base 180mm

The Trend Universal Plunge Router Sub-Base unlocks the potential of your router by providing improved concentricity and compatibility with Trend Guide Bushes. Made from reinforced nylon for a low-friction, precise routing surface. The Precision Centring System ensures perfect concentricity between cutter and guide bush for pinpoint accuracy with routing jigs. Reinforced threaded brass inserts provide secure mounting points for guide bushes. The Quick Pattern Finder makes locating the hole pattern for your router quick and easy. A screw pack helps you to find the right screws easily and keeps them neat when not in use.

GBP 32.99
1

Trend C220 x 1/4 TCT Intumescent Cutter 15 x 24mm TREC220

Trend C220 x 1/4 TCT Intumescent Cutter 15 x 24mm TREC220

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety K mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.

GBP 42.99
1

Trend C209 x 1/4 TCT Intumescent Recessor 10 x 24mm

Trend C209 x 1/4 TCT Intumescent Recessor 10 x 24mm

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety K mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.

GBP 42.99
1

Trend 7/01 x 1/4 TCT Ovolo & Round Over 2.5mm Radius TRE70114TC

Trend 7/01 x 1/4 TCT Ovolo & Round Over 2.5mm Radius TRE70114TC

Ovolo and rounding over cutters are ideal for panel work and edge moulding, all can be used on natural timbers, man-made particles and fibre boards. Popular uses include edging window frames, glazing bars, cabinets, table tops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Small solid guide pins can follow more intricate shapes in contrast to bearing guided cutters. Specifications Tooling T.C 1/4in Shank. D =3/8 inch. D =9.5 mm. D2=3.2 mm. C =9 mm. R =2.5 mm.

GBP 37.99
1

Trend TR29 x 1/4 TCT Shank Mounted Bearing Guided Profiler 12.7 x 25.4mm

Trend TR29 x 1/4 TCT Shank Mounted Bearing Guided Profiler 12.7 x 25.4mm

Trend TR29 Trade range Shank mounted guided profiler with extra long shank ideal for trimming and profiling timber, man-made board. Features 2 mm micrograin tungsten carbide tips, for cutting the most abrasive materials to give extra long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board and has the dimensions etched on the extra long 40 mm shanks, for quick identification. Dimensions:Shank: 1/4in.Cutting Diameter (D): 12.7mmCutting Length (C): 25.4mm

GBP 34.99
1