154 results (0,20027 seconds)

Show all filters

Brand

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Trend 47/4 1/4" TC Pierce & Trim Cutter 6.3mm

Trend 47/4 1/4" TC Pierce & Trim Cutter 6.3mm

The 1/4in. TC Router Cutter is designed for precision cutting, making it an excellent choice for working with laminate and other thin materials. Engineered for controlled cutting, it ensures clean, sharp edges for a high-quality finish. The innovative piercing tip allows for effortless drilling through materials while running smoothly against the workpiece for fast and efficient trimming. Ideal for professional and DIY applications, this cutter provides accuracy and reliability, helping to achieve precise results with minimal effort. Whether shaping laminate or refining edges, this durable and efficient tool is a must-have for achieving a flawless finish. Features and Benefits Ideal for achieving precise cuts in laminate and other delicate materials Delivers smooth and accurate cuts with well-defined edges Specialised piercing tip allows for effortless entry and efficient trimming Glides along the workpiece to enhance speed and cutting performance Designed for use by professionals and DIY enthusiasts alike Offers dependable precision for consistently excellent outcomes Typical Applications Laminate

GBP 22.99
2

Trend C012A x 1/4 TCT Two Flute Cutter 8.0 25.0mm

Trend C012A x 1/4 TCT Two Flute Cutter 8.0 25.0mm

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 17.99
1

Trend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm

Trend C145 x 1/4 TCT Bearing Guided Slotting Cutter 6.3mm

This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels. The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. D: 31.8 mm. C: 1/4 inch. C: 6.3 mm. B: 12.7 mm. E: 9.5 mm

GBP 39.99
1

Trend C220 x 1/4 TCT Intumescent Cutter 15 x 24mm TREC220

Trend C220 x 1/4 TCT Intumescent Cutter 15 x 24mm TREC220

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip. A bearing guide ensures the correct depth and width is always achieved to meet Fire Regulations. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety K mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.

GBP 42.99
1

Trend C019 x 1/4 TCT Two Flute Cutter 12.0 x 19.1mm

Trend C019 x 1/4 TCT Two Flute Cutter 12.0 x 19.1mm

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 19.99
1

Trend C001 x 1/4 TCT Two Flute Cutter 3.2mm x 9.5mm

Trend C001 x 1/4 TCT Two Flute Cutter 3.2mm x 9.5mm

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 20.99
1

Trend C015 X 1/4 TCT Two Flute Cutter 9.5 X 31.8MM

Trend C015 X 1/4 TCT Two Flute Cutter 9.5 X 31.8MM

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 19.99
1

Trend C013 X 1/4 TCT Two Flute Cutter 9.5 X 19.1MM

Trend C013 X 1/4 TCT Two Flute Cutter 9.5 X 19.1MM

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 17.99
1

Trend C030 x 1/4 TCT Two Flute Cutter 19.1 x 25.4mm TREC03014TC

Trend C030 x 1/4 TCT Two Flute Cutter 19.1 x 25.4mm TREC03014TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 24.99
1

Trend C019A x 1/4 TCT Two Flute Cutter 12.0 x 19.0mm TREC019A14TC

Trend C019A x 1/4 TCT Two Flute Cutter 12.0 x 19.0mm TREC019A14TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 25.99
1

Trend C022 x 1/4 TCT Two Flute Cutter 12.7 x 31.8mm TREC02214TC

Trend C022 x 1/4 TCT Two Flute Cutter 12.7 x 31.8mm TREC02214TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 24.99
1

Trend C008 x 1/4 TCT Two Flute Cutter 6.3 x 25.4mm TREC00814TC

Trend C008 x 1/4 TCT Two Flute Cutter 6.3 x 25.4mm TREC00814TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 17.99
1

Trend C014 x 1/4 TCT Two Flute Cutter 9.5 x 25.4mm TREC01414TC

Trend C014 x 1/4 TCT Two Flute Cutter 9.5 x 25.4mm TREC01414TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 18.99
1

Trend C016 x 1/4 TCT Two Flute Cutter 10.0 x 19.1mm TREC01614TC

Trend C016 x 1/4 TCT Two Flute Cutter 10.0 x 19.1mm TREC01614TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 19.99
1

Trend C024 x 1/4 TCT Two Flute Cutter 15.0 x 25.4mm TREC024A14TC

Trend C024 x 1/4 TCT Two Flute Cutter 15.0 x 25.4mm TREC024A14TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 21.99
1

Trend C002 x 1/4 TCT Two Flute Cutter 4.0 x 11.1mm TREC00214TC

Trend C002 x 1/4 TCT Two Flute Cutter 4.0 x 11.1mm TREC00214TC

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 19.99
1

Trend C172 x 1/2 TCT Two Flute Cutter 12.0 x 63.0mm TREC17212TC

Trend C172 x 1/2 TCT Two Flute Cutter 12.0 x 63.0mm TREC17212TC

Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/2in shank for heavier workloads, ideal for router table work and for use in bigger routers. The 'K' mark shank ensures safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 30.99
1

Trend C153 x 1/2 TCT Two Flute Workshop Cutter 12.7 x 50.0mm TREC15312TC

Trend C153 x 1/2 TCT Two Flute Workshop Cutter 12.7 x 50.0mm TREC15312TC

Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/2in shank for heavier workloads, ideal for router table work and for use in bigger routers. The 'K' mark shank ensures safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 23.99
1

Trend C153D x 1/2 TCT Two Flute Workshop Cutter 12.7 x 50.0mm TREC153D12TC

Trend C153D x 1/2 TCT Two Flute Workshop Cutter 12.7 x 50.0mm TREC153D12TC

Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/2in shank for heavier workloads, ideal for router table work and for use in bigger routers. The 'K' mark shank ensures safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.

GBP 33.99
1