192 results (0,16783 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Vesda Xtralis In-Line Filter Red VSP-850-R

Vesda Xtralis In-Line Filter Red VSP-850-R

Vesda Xtralis In-Line Filter Red VSP-850-RThe Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.Unlike other in-line filtration solutions available on the market the Xtralis In-Line Filter provides superior performance in terms of improving detector longevity and reducing maintenance frequency. Having tapered inlet and outlet means the Xtralis In-Line Filter is easily fitted in line with the sampling pipe without the need for any additional pipe fittings hence reducing the cost of installation. Filter elements can be easily replaced without having to remove the filter from the pipe network hence simplifying maintenance. Its elegant design blends in seamlessly into the installation where up to four can be installed side-by-side on Xtralis multi-pipe installations.The arrows on the Xtralis In-Line Filter cover indicate the direction of airflow aiding ease of correct mounting. As the airflow enters the filter housing it impinges on the filter elements which are positioned at a certain angle within the filter housing. This arrangement maximizes the filter element surface area subjected to the airflow hence promoting a longer filter life.Key FeaturesSuitable for all Xtralis Aspirating Smoke DetectorsImproved detector longevity in applications with high levels of air-borne contaminationReduces maintenance intervals thus reducing total cost of ownershipRequires no additional pipe fittings thus reducing cost of installationImproved aestheticsVertical or horizontal mountingCompatible with metric 25mm OD and imperial 1 OD pipes eliminating the need for pipe adaptors

GBP 135.30
1

Vesda Xtralis VSP-850-G In-line Filter Grey

Vesda Xtralis VSP-850-G In-line Filter Grey

Vesda Xtralis VSP-850-G In-line Filter GreyThe Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.Unlike other in-line filtration solutions available on the market the Xtralis In-Line Filter provides superior performance in terms of improving detector longevity and reducing maintenance frequency. Having tapered inlet and outlet means the Xtralis In-Line Filter is easily fitted in line with the sampling pipe without the need for any additional pipe fittings hence reducing the cost of installation. Filter elements can be easily replaced without having to remove the filter from the pipe network hence simplifying maintenance. Its elegant design blends in seamlessly into the installation where up to four can be installed side-by-side on Xtralis multi-pipe installations.The arrows on the Xtralis In-Line Filter cover indicate the direction of airflow aiding ease of correct mounting. As the airflow enters the filter housing it impinges on the filter elements which are positioned at a certain angle within the filter housing. This arrangement maximizes the filter element surface area subjected to the airflow hence promoting a longer filter life.Key FeaturesSuitable for all Xtralis Aspirating Smoke DetectorsImproved detector longevity in applications with high levels of air-borne contaminationReduces maintenance intervals thus reducing total cost of ownershipRequires no additional pipe fittings thus reducing cost of installationImproved aestheticsVertical or horizontal mountingCompatible with metric 25mm OD and imperial 1 OD pipes eliminating the need for pipe adaptors

GBP 135.30
1

Vesda VHX-1200 VESDAnet Socket with HLI in Metal Enclosure

Vesda VHX-1200 VESDAnet Socket with HLI in Metal Enclosure

Vesda VHX-1200 VESDAnet Socket with HLI in Metal EnclosureThe VESDA Wall-Mounted High Level Interface HLI links your VESDAnet with PC software monitoring and configuring tools such as Xtralis VSM4 and Xtralis VSC. The HLI includes a built-in VESDAnet socket card.Direct Access to the NetworkBy interfacing with PC monitoring and configuring tools the Wall-mounted HLI allows you to easily configure manage and monitor your entire VESDA network. The built-in VESDAnet socket card makes the Wall-mounted HLI a cost effective solution to your interface requirements. The Wall-mounted HLI receives its voltage supply of 24VDC from the VESDAnet socket card. Therefore an additional power supply is not required.Remote InstallationConnecting to your VESDAnet is easy and convenient because the wall-mounted HLI does not need to be mounted near an VESDA smoke detector. The wall-mounted HLI can be mounted in an easy-to-access remote location away from your detectors such as on a wall near your PC.Simple Configuration and Seamless Data TransferYour HLI is easily configured using your PC and Xtralis VSC or Xtralis VSM4 software packages. The Wall-mounted HLI VHX-1200 provides seamless data transfer from your VESDAnet to your PC.Key FeaturesDirect access and monitoring of your entire VESDAnet systemBuilt-in VESDAnet Interface socket card provides communication and power to the HLIConvenient wall-mounted designSeamless data transfer on networks of up to 200 VESDA devicesEasily configured using Xtralis configuring and monitoring software packages

GBP 1222.97
1

Vesda Xtralis 25mm In-line Expansion Socket 100mm PIP-019

Vesda Xtralis 25mm In-line Expansion Socket 100mm PIP-019

Vesda Xtralis 25mm In-line Expansion Socket 100mm PIP-019These sockets are used in the installation of pipework where buildings may contract or expand or have fluctuation of temperatures. They allow for movement within the pipework while maintaining a sealed connection due to the internal rubber gaskets.VESDA Aspirating Pipe and Fittings are produced in red ABS under a stringent quality control system approved to BS EN ISO 9001 EN54 - 20 and EN61386-1 Class 1131 ABS Acrylonitrile Butadiene Styrene is a robust polymer which has the most suitable physical properties for aspirating detection optimising performance with tensile strength chemical resistance ductility weatherability heat stability and processability.The range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system. They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you the quality you are used to as a VESDA customer.Key Features Tech SpecsMaterial ABSColour RedOperating temperature range -40C to 70CLength 100mmEN54 testedPlease Note The PIP-019 is equivalent to the REDEXSOC.

GBP 19.73
1

Vesda Xtralis VSP-870 ASD Restrictor In-Line Flow Assembly

Vesda Xtralis VSP-870 ASD Restrictor In-Line Flow Assembly

Vesda Xtralis VSP-870 ASD Restrictor In-Line Flow AssemblyThe sampling kit consists of outer and inner parts with the sampling pipe penetrating the Refrigerated Storage sandwich panel.The sampling pipe through the sandwich panel and inner parts are made of ABS plastic which is suitable for low temperatures down to -40 C -40 F.The kit comprises a restriction assembly placed above the sandwich panel which consists of a sampling orifice within a socket union.Key FeaturesEnables the ASD pipe to be installed inspected and maintained outside the Refrigerated Storage facility hence enabling fire contractors to work in ambient conditions most of the timeSuited for facilities with and without ceiling cavitiesEliminates the need for expensive HDPE high density polyethylene pipe inside the Refrigerated Storage facilityEliminates the need for costly access equipment hire for on-going service maintenanceEliminates the need for heat tracingLess prone to blockage due to icingProvides a generally more robust ASD installation for these unique environmentsProvides considerably improved aestheticsMinimises the need for Back Flush systemsOffers all round cost savingsPlease Note The VSP-870 is equivalent to the REDBOIFR0250.

GBP 61.34
1

Vesda VSP-005 VLP VLS VLC amp VLF Filter

Vesda VSP-005 VLP VLS VLC amp VLF Filter

Vesda VSP-005 VLP VLS VLC VLF FilterThe VESDA replacement filter cartridge is used to replace filter cartridges in VESDA LaserCOMPACT LaserFOCUS LaserPLUS and LaserSCANNER detectors. One model fits all detectors.Importance of Changing the FilterThe filters used in VESDA detectors are key to the performance of the detector. VESDA filers remove dust contamination from the sampled air providing a clean air bleed to preserve the optics in the detection chamber. Like any other filter filters in VESDA detectors must be replaced regularly to ensure optimum efficiency.It is recommended that the filter is replaced in the VESDA VLC VLS VLP and VLF every two years to maintain the operational integrity of the detector you may want to consider replacing the filter more frequently if the detector is used in dusty or dirty conditions. Instructions on how to do this can be found in the replacement instructions in the download section below.Replacing the FilterBefore replacing the filter in your detector it may be necessary to advise any monitoring authorities that the detector may be offline for a short period.Ensure that the area surrounding the filter is clear of dirt and debris and remove the filter. Do not attempt to clean and reuse the filter VESDA filters are intended for single-use only. Once the new filter has been inserted the detector needs to be informed that a new filter has been installed.Key FeaturesEasy swap replacement filterFits VLC VLF VLP and VLS VESDA detectorsAvailable singly or in packs of 2090 mm x 63 mm x 30 mm 3.5 in. x 2.5 in. x 1.2 in.

GBP 69.64
1

Vesda Xtralis KA-1 Steam Trap

Vesda Xtralis KA-1 Steam Trap

Vesda Xtralis KA-1 Steam TrapIf the Compact ASD is operated in environments where condensate can form in the pipe system then a condensate trap is used. To collect the condensate the steam trap is fitted at the lowest point of the pipe system between the air filter and the smoke detection system. Using 45 angles gives optimum wall distance.The steam trap can be operated in a temperature range of 0C to 50C. The sinter filter in the condensate trap has a pore width of 50 m and additionally absorbs coarse dust particles.The condensate trap is used in the following areasAreas with severely oscillating temperatures and high air humidityExternal areasSauna areas

GBP 280.10
1

Vesda Xtralis VSP-025 Filter Cartridge for VLP VLS VLC amp VLF Pack of 20

Vesda Xtralis VSP-025 Filter Cartridge for VLP VLS VLC amp VLF Pack of 20

Vesda Xtralis VSP-025 Filter Cartridge for VLP VLS VLC VLF Pack of 20The VSP-025 is a VESDA replacement filter cartridge VSP-005 for single units and VSP-025 for a pack of 20 is used to replace filter cartridges in VESDA LaserCOMPACT LaserFOCUS LaserPLUS and LaserSCANNER detectors. One model fits all detectors.Key FeaturesEasy swap replacement filterFits VLC VLF VLP and VLS VESDA detectorsAvailable singly or in packs of 2090 mm x 63 mm x 30 mm 3.5 in. x 2.5 in. x 1.2 in.Two Stage FiltrationFirst stage removes particles in excess of 20 micronsSecond stage is ultra-fine and removes more than 99 of particles of 0.3 microns or larger to provide a clean air barrier for optics protection

GBP 1392.68
1

Vesda OSI-RE-SS OSID R Reflective Beam

Vesda OSI-RE-SS OSID R Reflective Beam

Vesda OSI-RE-SS OSID R Reflective BeamThe Vesda OSI-RE-SS is a 4-wire single-ended reflected type beam smoke detector that includes an 8 reflector and an integral sensitivity test.The Vesda OSI-RE-SS is a reflector-type linear optical beam smoke detector designed to operate as a component of fire alarm systems. The beam operates primarily on the principle of light obscuration utilising an Infra-Red beam. Optical beam smoke detectors are particularly appropriate for protecting buildings with large open spaces such as warehouses atriums etc.The OSI-RE-SS detector is a combined transmitterreceiver unit that can be directly connected to a conventional detector circuit.Key FeaturesCombined transmitter and receiver unit range 5-100 m 16-328 ftConventional modelReceiver consists of a CMOS imaging CCDWide 12 field of viewIntuitive beam alignment indicated by directional arrowsSingle IR wavelengthHighly resistant to building movement tolerates - 1 movementResistant to strong light sources does not alarm when saturated by sunResistant to large solid intruding objectsAutomatic sensitivity threshold level setting50 horizontal and 20 vertical beam alignmentBuilt-in heaterElectronic simulated smoke test from ground levelStandby fault and alarm LED indicators visible from the front and bottomAutomatic drift compensationPaintable coverRemovable plug-in terminal blocksOptional heater kit available for the reflectorThe Infra-Red transmitter and receiver Imager generates a beam of light towards a high efficiency reflector. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition.The receiver imager has a wide FOV of 12 and tracks automatically the reflector in case of building movement or movement of its support structure. It is virtually impossible for the receiver to lose the reflector out of its side of view without any structural damage being caused to the building. As a result of this operation the OSI-RE-SS eliminates the number one cause of false alarms andor faults with traditional beam detectors.Optical filtering high-speed image acquisition and intelligent software algorithms provide the OSID-RE system with higher levels of stability and with greater resistance to high level lighting variability. As such the detector has a better resistance to sunlight and intruding objects in its FOV.The detector will not alarm when saturated by sunlight reflected sunlight or any other very bright light sources. In worst case the detector will go in to trouble and hence solving another cause of false alarms with traditional basic photocell receiver beam detectors. Thanks to the smoke imaging techniques the detector will not alarm for partial and sudden blockage.The alignment of the detector is extremely intuitive fast and accurate. Both the IR transmitter and the CMOS imager are contained in the eyeball that can turn freely in all directions. The eyeball moves - 20 in the vertical direction and 50 in the horizontal direction. Four arrows that indicate the direction to move the eyeball will guide the user to find the imagers perfect alignment with the reflector.To get started swiftly at long distances a laser tool can be inserted in the eyeball to allow finding the reflector quickly and then fine-tuning the eyeball to the optimum alignment. Once the optimum alignment is finalised signalled by all green arrows and LED the eyeball is locked by tightening the lever on its side. A paintable cover is then placed over the front to hide the alignment arrows locking mechanism and secures the locking lever in locked position. Unique in the market the sensitivity of the detector is selected and set automatically at the optimum sensitivity based on the size of the reflector measured in the FOV. The detector incorporates automatic drift compensation whereby the detector will adjust its detection thresholds in line with any long term signal reduction of the beam caused by contamination of the optical surfaces. An internal heating option is also provided on the Imager to prevent condensation on the optical surface.

GBP 870.91
1

Vesda Xtralis PIP-014 Pipe Cutters

Vesda Xtralis PIP-014 Pipe Cutters

Vesda Xtralis PIP-014 Pipe CuttersHard wearing tool for neat cuts in pipes it comes complete with a V shaped long lasting blade which is made from high carbon steel. In turn this reduces tube deformation.It features a comfortable handle without a return spring for ease of use.The Vesda range of Pipes and Fittings have been specially developed to provide fully matched components for the optimal performance of your whole Vesda aspirating system.They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you quality.The pipes are a metric standard of 25mm external diameter with suitable adapters available for imperial to metric conversions and are designed for use with any make of low pressure aspirating type smoke detection system.Unlike some metal pipes Vesda ABS pipework is very light in weight. This makes it easy to handle in high and difficult places where systems are often installed. The standard Vesda pipe and fittings are supplied in red to identify their service as fire.Key FeaturesShipping weight 1000gmsComfortable handleNeat cutsV shaped bladePlease Note The PIP-014 is equivalent to the REDPIPC.

GBP 81.65
1

Vesda Xtralis VRT-T00 VLI Remote Mount Display without Relays

Vesda Xtralis VRT-T00 VLI Remote Mount Display without Relays

Vesda Xtralis VRT-T00 VLI Remote Mount Displaywith Remote Termination Cardwithout RelaysA VESDA Remote Display Module monitors and reports the status of a VESDA aspirating smoke detector. The display module can be mounted in a detector unit or separately in a remote unit or 19 sub rack connected via VESDAnet. It provides a visual representation of smoke levels along with all alarm and fault conditions. For monitoring convenience multiple displays can be associated with a single detector.Key FeaturesProvides Immediate Status Reporting for a Single VESDA ZoneAllows Zone Control of Assigned VESDA DetectorHigh Intensity Alarm LEDsRemote Relay Option20-Segment Vertical Bar Graph DisplayAlarm Threshold IndicatorsBuilt-In Sounder for Audible WarningComprehensive Fault ReportingMulti-mode Numeric Display defaults to smoke obscurationRecessed Mounting Option

GBP 903.37
1

Vesda-E VEP amp VES VSP-962 Spare Replacement Filter Singular

Vesda-E VEP amp VES VSP-962 Spare Replacement Filter Singular

Vesda-E VEP VES VSP-962 Spare Replacement Filter SingularThe VESDA-E detector uses a two-stage filter to protect the optics of the detection head. The filter is made in a compact construction and is intended for single use. The filter removes dust and other dirt from the sucked air creating a protective barrier for the optics.The detector monitors the filter filling. The filter should be replaced at least every 2 years or if the filter has previously been filled in accordance with the message. In environments with significant air pollution it may be necessary to replace the filter more frequently which should be determined individually based on information from the detector.A properly configured system will remind the user to change the filter reporting on zone detectors filter damage on all detectors connected to the given detector. Damage is reported ifThe dust meter will exceed the programmed limitThe system clock will indicate the date on which the filter replacement occursThe replacement period is calculated based on the date of the last filter replacement and data in the detector configuration

GBP 92.72
1

Vesda-E VEP amp VES VSP-962-20 Spare Replacement Filter Pack of 20

Vesda-E VEP amp VES VSP-962-20 Spare Replacement Filter Pack of 20

Vesda-E VEP VES VSP-962-20 Spare Replacement Filter Pack of 20The VESDA detector uses a two-stage filter to protect the optics of the detection head. The filter is made in a compact construction and is intended for single use. The filter removes dust and other dirt from the sucked air creating a protective barrier for the optics.The detector monitors the filter filling. The filter should be replaced at least every 2 years or if the filter has previously been filled in accordance with the message. In environments with significant air pollution it may be necessary to replace the filter more frequently which should be determined individually based on information from the detector.A properly configured system will remind the user to change the filter reporting on zone detectors filter damage on all detectors connected to the given detector. Damage is reported ifthe dust meter will exceed the programmed limitthe system clock will indicate the date on which the filter replacement occursThe replacement period is calculated based on the date of the last filter replacement and data in the detector configuration

GBP 1497.66
1

Vesda Xtralis VSP-860 Refrigerated Storage Sampling Kit

Vesda Xtralis VSP-860 Refrigerated Storage Sampling Kit

Vesda Xtralis VSP-860 Refrigerated Storage Sampling KitThe Xtralis Refrigerated Storage Sampling Kit provides a standardised method of smoke sampling for Refrigerated Storage facilities in a considerably improved manner allowing simplified installation with reduced maintenance thus promoting more reliable and hassle-free operation.The Xtralis Refrigerated Storage Sampling Kit has been designed to replace standard cone-shaped sampling nozzles installed at the ceiling in existing or new Refrigerated Storage facilities. This kit can be installed in the entire facility or combined with standard sampling points if required.The aim here is to reduce direct ice blockage of the sampling points hence this kit is recommended for installation in areas where higher humidity is likely to occur as a result of vehicle and pedestrian traffic e.g. areas close to doorways or perimeter of the facility.Key FeaturesEnables the ASD pipe to be installed inspected and maintained outside the Refrigerated Storage facility hence enabling fire contractors to work in ambient conditions most of the timeSuited for facilities with and without ceiling cavitiesEliminates the need for expensive HDPE high density polyethylene pipe inside the Refrigerated Storage facilityEliminates the need for costly access equipment hire for on-going servicemaintenanceEliminates the need for heat tracingLess prone to blockage due to icingProvides a generally more robust ASD installation for these unique environmentsProvides considerably improved aestheticsMinimizes the need for Back Flush systemsOffers all round cost savings

GBP 100.93
1

Vesda Xtralis PIP-012 250ml Solvent Cement

Vesda Xtralis PIP-012 250ml Solvent Cement

Vesda Xtralis 250ml Solvent CementSolvent cement welding is a simple and quick means of constructing high integrity leak free joints. Care must be used to ensure that the correct solvent cement is used and that joining instructions are followed properly.This specially formulated solvent cement is used with ABS pipe and fittings to join the surfaces together. The solvent cement melts the two surfaces to form a chemical weld when applied correctly between the fittings.Key FeaturesSolvent cement for ABSContains 250mlProduct InformationSeparate COSHH statement availableIntended usage Jointing of pipeworkPacking 0.25 litre cans Acorn FireConstituents ABS resin dispersed in MethylEthyl KetoneShelf life 12 months minimumPhysical Product DataBoiling Point 80CVapour pressure 100mm Mercury at 25CVapour density 1.18 at 20C 2.4 at boilingpointSpecific gravity 0.86Solubility in Water MiscibleAppearance Grey opaque fluid Strong odourBefore Applying Solvent CementBe aware at all times of good safety practicesSolvent cements are flammableEliminate all ignition sourcesDo not smoke during use and do not expose to other sources of heat or flame in working or storage areasAvoid breathing vaporsUse only with adequate ventilationExplosion proof mechanical ventilation or local exhaust is recommended to maintain vapor concentrations below recommended exposure limitsIn confined areas a NIOSH approved organic vapor cartridge respirator with full-face piece is recommendedCement should be stored in the shade at temperatures between 40F and 110F Acorn FireContainers should be kept tightly closed when not in use and covered as much as possible during useAvoid contact with eyes.Splash proof chemical goggles are recommendedAvoid frequent contact with skinWearing PVA coated gloves and an impervious apron are recommendedSolvent cements have a limited shelf life and must be used prior to the expiration dateRefer to printed warnings on cement can and Material Safety Datasheets for additional informationWARNINGSolvent cement and cleanersARE HAZARDOUSFLAMMABLE MATERIALS. Do not joint nearnaked names and avoid smoking in the working area.Do not use cements or cleaners in confined spaces.Concentrated vapours may cause dizziness.Please Note The PIP-012 is equivalent to the REDCEM.

GBP 14.63
1

Xtralis OSE-ACF OSID Anti-Condensation Film for Emitter Pack of 10

Xtralis OSE-ACF OSID Anti-Condensation Film for Emitter Pack of 10

Xtralis OSE-ACF OSID Anti-Condensation Film for Emitter Pack of 10Pack of 10 anti-condensation films designed for OSID Emitters.Emitters are equipped with an acrylic lens and are therefore not normally prone to condensation. However in some extremely moist environments condensation may nevertheless occur on the lens. Slow forming condensation can produce an unacceptably large loss of signal. To prevent that from occurring the Emitter lens can be fitted with an anti-condensation film. The film can be quickly and easily applied to the lens without the need for special tools or adhesives.The film prevents condensation from forming and keeps the lens clear. Note however that the film causes a 10 reduction in maximum detection distance. A damp cloth can be used to clean the film if it becomes contaminated. The combination of the film and the algorithms in the Imager offer a cost-effective solution for condensation susceptible areas. The OSID Imager has a built-in heater and the film should not be used on Imagers.In harsh environments where the OSID-EH environmental housings are used and condensation is expected both Emitter and Imager housing can be fitted with an anti-condensation film. When applied on Emitter and Imager housing there is a 20 reduction in maximum detection distance.Key FeaturesPrevents condensationFast and easy installationSimple maintenanceLong lifetimeHighly scratch resistantDoes not crack peel or discolour from exposure to sunlightEasy to clean using cleaning solvents

GBP 184.85
1