48 results (0,16008 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Watco Balcony Coating 25KG, Grey

Watco Balcony Coating 25KG, Grey

Images for illustration purposes only Watco Balcony Coating is a hard wearing, flexible waterproofing coating ideal for balconies or external walkways where water ingress can cause problems. It fills hairline cracks and helps prevent the penetration of rainwater and moisture. It provides a flexible and hard wearing surface. Because it is applied as a liquid, it can be used to protect around pipes, rainwater outlets and protrusions more effectively than sheet materials. We recommend that cracks or floor/wall joints are bridged with Watco Fibreglass Tape in conjunction with Watco Balcony Coating. Features Excellent waterproofing properties Permanently flexible anti slip surface will not split with the movement of the substrate Resistant to weathering and the effects of UV exposure One coat usually sufficient

GBP 249.99
1

Watco Concrex Vertical Grey, 10KG

Watco Concrex Vertical Grey, 10KG

Images for illustration purposes onlyWatco Concrex Vertical is a two part epoxy resin mortar with special lightweight fillers and is approximately a third of the density of ordinary mortars. This means it can be used repair damaged concrete pillars, sills, lintels, beams, render and stonework without slumping or falling out as the repair sets. It is ideal for frost spalled concrete surfaces with exposed reinforcement. Apply at any depth without the need to build up layers. Watco Concrex Vertical Cold Cure is ideal for repairing damaged masonry on vertical surfaces in cold rooms or externally.Recommended areas of useDamaged concrete pillars, sills, beams, render and stone workFrost spalled and damaged concrete surfacesAreas with exposed reinforcementFeaturesWill not slump during applicationWill not shatter under impact damageDurable and impervious finishProvides excellent chemical resistanceWill hold lightweight fixings while wet or can be drilled after curingCoverage approx. 0.6m per 2.5kg at 5mm thickConcrex Vertical Cold Set cures in temperatures as low as 0CApply at any depth without the need to build up layersWatco Tack Coat is recommended for all applications

GBP 169.99
1

Watco Concrex Vertical Cold Cure Grey, 10KG

Watco Concrex Vertical Cold Cure Grey, 10KG

Images for illustration purposes onlyWatco Concrex Vertical is a two part epoxy resin mortar with special lightweight fillers and is approximately a third of the density of ordinary mortars. This means it can be used repair damaged concrete pillars, sills, lintels, beams, render and stonework without slumping or falling out as the repair sets. It is ideal for frost spalled concrete surfaces with exposed reinforcement. Apply at any depth without the need to build up layers. Watco Concrex Vertical Cold Cure is ideal for repairing damaged masonry on vertical surfaces in cold rooms or externally.Recommended areas of useDamaged concrete pillars, sills, beams, render and stone workFrost spalled and damaged concrete surfacesAreas with exposed reinforcementFeaturesWill not slump during applicationWill not shatter under impact damageDurable and impervious finishProvides excellent chemical resistanceWill hold lightweight fixings while wet or can be drilled after curingCoverage approx. 0.6m per 2.5kg at 5mm thickConcrex Vertical Cold Set cures in temperatures as low as 0CApply at any depth without the need to build up layersWatco Tack Coat is recommended for all applications

GBP 183.99
1

Watco Aluminium Nosing Grey 55mm X 55mm X 3000mm

Watco Aluminium Nosing Grey 55mm X 55mm X 3000mm

Images for illustration purposes onlyThe perfect solution to slippery step nosings, which can be glued and/or screwed to stone, tile or concrete steps. They have a chamfered back edge to minimise any potential trip hazard. FeaturesAvailable with a yellow or aluminium coloured slip-resistant GRP insertSupplied in a variety of lengthsAll nosings are angled at 90 degreesIf using the nosings externally, please advise when ordering and use Watco GRP Adhesive Mastic to fix the inserts in place

GBP 109.99
1

Watco Aluminium Nosing Grey 55mm X 55mm X 1500mm

Watco Aluminium Nosing Grey 55mm X 55mm X 1500mm

Images for illustration purposes onlyThe perfect solution to slippery step nosings, which can be glued and/or screwed to stone, tile or concrete steps. They have a chamfered back edge to minimise any potential trip hazard. FeaturesAvailable with a yellow or aluminium coloured slip-resistant GRP insertSupplied in a variety of lengthsAll nosings are angled at 90 degreesIf using the nosings externally, please advise when ordering and use Watco GRP Adhesive Mastic to fix the inserts in place

GBP 59.99
1

Watco Aluminium Nosing Grey 70mm X 30mm X 1000mm

Watco Aluminium Nosing Grey 70mm X 30mm X 1000mm

Images for illustration purposes onlyThe perfect solution to slippery step nosings, which can be glued and/or screwed to stone, tile or concrete steps. They have a chamfered back edge to minimise any potential trip hazard. FeaturesAvailable with a yellow or aluminium coloured slip-resistant GRP insertSupplied in a variety of lengthsAll nosings are angled at 90 degreesIf using the nosings externally, please advise when ordering and use Watco GRP Adhesive Mastic to fix the inserts in place

GBP 39.99
1

Watco Aluminium Nosing Grey 55mm X 55mm X 750mm

Watco Aluminium Nosing Grey 55mm X 55mm X 750mm

Images for illustration purposes onlyThe perfect solution to slippery step nosings, which can be glued and/or screwed to stone, tile or concrete steps. They have a chamfered back edge to minimise any potential trip hazard. FeaturesAvailable with a yellow or aluminium coloured slip-resistant GRP insertSupplied in a variety of lengthsAll nosings are angled at 90 degreesIf using the nosings externally, please advise when ordering and use Watco GRP Adhesive Mastic to fix the inserts in place

GBP 29.99
1

Watco Aluminium Nosing Grey 55mm X 55mm X 1000mm

Watco Aluminium Nosing Grey 55mm X 55mm X 1000mm

Images for illustration purposes onlyThe perfect solution to slippery step nosings, which can be glued and/or screwed to stone, tile or concrete steps. They have a chamfered back edge to minimise any potential trip hazard. FeaturesAvailable with a yellow or aluminium coloured slip-resistant GRP insertSupplied in a variety of lengthsAll nosings are angled at 90 degreesIf using the nosings externally, please advise when ordering and use Watco GRP Adhesive Mastic to fix the inserts in place

GBP 39.99
1

Watco Aluminium Nosing Grey 70mm X 30mm X 1500mm

Watco Aluminium Nosing Grey 70mm X 30mm X 1500mm

Images for illustration purposes onlyThe perfect solution to slippery step nosings, which can be glued and/or screwed to stone, tile or concrete steps. They have a chamfered back edge to minimise any potential trip hazard. FeaturesAvailable with a yellow or aluminium coloured slip-resistant GRP insertSupplied in a variety of lengthsAll nosings are angled at 90 degreesIf using the nosings externally, please advise when ordering and use Watco GRP Adhesive Mastic to fix the inserts in place

GBP 55.99
1

Watco Industrial Wall Coating Window Grey

Watco Industrial Wall Coating Window Grey

Images for illustration purposes onlyThis industrial coating provides superb hiding power with just one application. Specially formulated for industrial and commercial premises, it covers normally in one thick coat to provide, in half the time, a bright clean appearance to walls and ceilings. The special high build, non-drip formulation eases application. Recommended areas of useSpecially formulated for industrial and commercial premisesFeaturesCovers in one coatHigh build, non drip formulationFast drying and easy to applyCan be spray applied

GBP 149.99
1

Watco Aluminium Nosing Grey 70mm X 30mm X 750mm

Watco Aluminium Nosing Grey 70mm X 30mm X 750mm

Images for illustration purposes onlyThe perfect solution to slippery step nosings, which can be glued and/or screwed to stone, tile or concrete steps. They have a chamfered back edge to minimise any potential trip hazard. FeaturesAvailable with a yellow or aluminium coloured slip-resistant GRP insertSupplied in a variety of lengthsAll nosings are angled at 90 degreesIf using the nosings externally, please advise when ordering and use Watco GRP Adhesive Mastic to fix the inserts in place

GBP 29.99
1

Watco Aluminium Nosing Grey 70mm X 30mm X 3000mm

Watco Aluminium Nosing Grey 70mm X 30mm X 3000mm

Images for illustration purposes onlyThe perfect solution to slippery step nosings, which can be glued and/or screwed to stone, tile or concrete steps. They have a chamfered back edge to minimise any potential trip hazard. FeaturesAvailable with a yellow or aluminium coloured slip-resistant GRP insertSupplied in a variety of lengthsAll nosings are angled at 90 degreesIf using the nosings externally, please advise when ordering and use Watco GRP Adhesive Mastic to fix the inserts in place

GBP 109.99
1

Watco Epoxy Gloss Coat Hygienic Tarpaulin Grey

Watco Epoxy Gloss Coat Hygienic Tarpaulin Grey

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 269.99
1

6x Watco Epoxy Gloss Coat Hygienic Tarpaulin Grey EGCHYGBEFRAL7010

6x Watco Epoxy Gloss Coat Hygienic Tarpaulin Grey EGCHYGBEFRAL7010

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1499.94
1

Watco Epoxy Gloss Coat Hygienic Window Grey

Watco Epoxy Gloss Coat Hygienic Window Grey

Images for illustration purposes onlyWatco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

Watco Firm-Step Heavy Duty Sheet Fine 1200mm X 1200mm, Grey

Watco Firm-Step Heavy Duty Sheet Fine 1200mm X 1200mm, Grey

Images for illustration purposes onlyFirm-Step Heavy Duty GRP sheets bring maximum safety underfoot in heavy traffic industrial environments. Ideal for areas in constant use, Firm-Step Heavy Duty GRP Sheets enable you to produce continuous slip resistant walkways and workspaces with hardly any downtime. The resin bonded ceramic grit surface offers the same superior durability as the Firm-Step Heavy Duty GRP Step Covers. Available in four colours and in fine or coarse grades.Recommended areas of useRamps, walkways, fire escapes, all staircases, mezzanine floors, train track crossings, areas of heavy foot trafficInternal ramps and staircasesIdeal for wet or very cold areas where the application of a coating may be impractical. Also suitable to be used around oily machines and for chemically damaged floorsFeaturesTough and hard wearing for continuous slip resistance that wont rot, warp or corrodeHeavy wear, slip resistance for vehicles, forklifts and pedestriansExtremely low slip potential (Wet PTV 70) Available up to 2400mm x 1200mm with our free cut to size service. Or can be trimmed to size on siteWe recommend screw fixing to most substrates, combined with Watco Adhesive Mastic to prevent rocking on uneven surfaces. Screws and fixing plugs and a free pre-drilling service are available if required. Pendulum Slip Test ValuesTop Surface Dry PTV Wet PTVCoarse Grit 76 Extremely low slip potential 70 Extremely low slip potential Fine Grit 71 Extremely low slip potential 63 Extremely low slip potential

GBP 269.99
1

Watco Firm-Step Heavy Duty Sheet Fine 800mm X 1200mm, Grey

Watco Firm-Step Heavy Duty Sheet Fine 800mm X 1200mm, Grey

Images for illustration purposes onlyFirm-Step Heavy Duty GRP sheets bring maximum safety underfoot in heavy traffic industrial environments. Ideal for areas in constant use, Firm-Step Heavy Duty GRP Sheets enable you to produce continuous slip resistant walkways and workspaces with hardly any downtime. The resin bonded ceramic grit surface offers the same superior durability as the Firm-Step Heavy Duty GRP Step Covers. Available in four colours and in fine or coarse grades.Recommended areas of useRamps, walkways, fire escapes, all staircases, mezzanine floors, train track crossings, areas of heavy foot trafficInternal ramps and staircasesIdeal for wet or very cold areas where the application of a coating may be impractical. Also suitable to be used around oily machines and for chemically damaged floorsFeaturesTough and hard wearing for continuous slip resistance that wont rot, warp or corrodeHeavy wear, slip resistance for vehicles, forklifts and pedestriansExtremely low slip potential (Wet PTV 70) Available up to 2400mm x 1200mm with our free cut to size service. Or can be trimmed to size on siteWe recommend screw fixing to most substrates, combined with Watco Adhesive Mastic to prevent rocking on uneven surfaces. Screws and fixing plugs and a free pre-drilling service are available if required. Pendulum Slip Test ValuesTop Surface Dry PTV Wet PTVCoarse Grit 76 Extremely low slip potential 70 Extremely low slip potential Fine Grit 71 Extremely low slip potential 63 Extremely low slip potential

GBP 199.99
1

Watco Firm-Step Heavy Duty Sheet Fine 2400mm X 1200mm, Grey

Watco Firm-Step Heavy Duty Sheet Fine 2400mm X 1200mm, Grey

Images for illustration purposes onlyFirm-Step Heavy Duty GRP sheets bring maximum safety underfoot in heavy traffic industrial environments. Ideal for areas in constant use, Firm-Step Heavy Duty GRP Sheets enable you to produce continuous slip resistant walkways and workspaces with hardly any downtime. The resin bonded ceramic grit surface offers the same superior durability as the Firm-Step Heavy Duty GRP Step Covers. Available in four colours and in fine or coarse grades.Recommended areas of useRamps, walkways, fire escapes, all staircases, mezzanine floors, train track crossings, areas of heavy foot trafficInternal ramps and staircasesIdeal for wet or very cold areas where the application of a coating may be impractical. Also suitable to be used around oily machines and for chemically damaged floorsFeaturesTough and hard wearing for continuous slip resistance that wont rot, warp or corrodeHeavy wear, slip resistance for vehicles, forklifts and pedestriansExtremely low slip potential (Wet PTV 70) Available up to 2400mm x 1200mm with our free cut to size service. Or can be trimmed to size on siteWe recommend screw fixing to most substrates, combined with Watco Adhesive Mastic to prevent rocking on uneven surfaces. Screws and fixing plugs and a free pre-drilling service are available if required. Pendulum Slip Test ValuesTop Surface Dry PTV Wet PTVCoarse Grit 76 Extremely low slip potential 70 Extremely low slip potential Fine Grit 71 Extremely low slip potential 63 Extremely low slip potential

GBP 499.99
1

Watco Firm-Step Heavy Duty Sheet Coarse Grey, 1200MM X 1200MM

Watco Firm-Step Heavy Duty Sheet Coarse Grey, 1200MM X 1200MM

Images for illustration purposes onlyFirm-Step Heavy Duty GRP sheets bring maximum safety underfoot in heavy traffic industrial environments. Ideal for areas in constant use, Firm-Step Heavy Duty GRP Sheets enable you to produce continuous slip resistant walkways and workspaces with hardly any downtime. The resin bonded ceramic grit surface offers the same superior durability as the Firm-Step Heavy Duty GRP Step Covers. Available in four colours and in fine or coarse grades.Recommended areas of useRamps, walkways, fire escapes, all staircases, mezzanine floors, train track crossings, areas of heavy foot trafficInternal ramps and staircasesIdeal for wet or very cold areas where the application of a coating may be impractical. Also suitable to be used around oily machines and for chemically damaged floorsFeaturesTough and hard wearing for continuous slip resistance that wont rot, warp or corrodeHeavy wear, slip resistance for vehicles, forklifts and pedestriansExtremely low slip potential (Wet PTV 70) Available up to 2400mm x 1200mm with our free cut to size service. Or can be trimmed to size on siteWe recommend screw fixing to most substrates, combined with Watco Adhesive Mastic to prevent rocking on uneven surfaces. Screws and fixing plugs and a free pre-drilling service are available if required. Pendulum Slip Test ValuesTop Surface Dry PTV Wet PTVCoarse Grit 76 Extremely low slip potential 70 Extremely low slip potential Fine Grit 71 Extremely low slip potential 63 Extremely low slip potential

GBP 279.99
1

6x Watco Epoxy Matt Coat Hygienic Tarpaulin Grey EMCHYGBEFRAL7010

6x Watco Epoxy Matt Coat Hygienic Tarpaulin Grey EMCHYGBEFRAL7010

Images for illustration purposes onlyWatco Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor.Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1259.94
1

Watco Epoxy Matt Coat Hygienic Tarpaulin Grey

Watco Epoxy Matt Coat Hygienic Tarpaulin Grey

Images for illustration purposes onlyWatco Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor.Hygienic grades incorporate Silver Ion technology and are ideal for areas where cleanliness and hygiene are as important as a hard wearing finish. Although the product tests as low slip potential, if positive traction is required please specify Watco Safety Coat.All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously.Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsMost heavily trafficked floorsFeaturesTough, hard wearing floor finish for heavy wear areasApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursGloss, Matt or Hygienic versions availableTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 14 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 239.99
1