46 results (0,14649 seconds)

Show all filters

Brand

Colour

Size

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Watco Roofsafe Mid Grey 5KG (4L)

Watco Roofsafe Mid Grey 5KG (4L)

Images for illustration purposes onlyOne coat of Watco's roof paint seals and weatherproofs most surfaces and provides a tough, slip resistant finish. The colours can be used to indicate clearly where access is permitted on the roof. The thick, flexible formulation also makes an ideal emergency repair since it can be applied in the wet and is immediately water repellent. Great for walkways, flat roofs, effective weatherproofing for flat or pitched roofs and plastic or metal gutters. Not suitable for roofs with a lot of foot traffic, for this use Watco Liquid Roof Membrane Anti Slip.Recommended areas of useRoofs where occasional access is required for maintenance etc. Roof gulleys and guttersFeaturesEasy one coat application by brush or rollerTough, flexible, 'high build' formulations bridges splits and cracks up to 2mmEffective waterproofing for flat/pitched roofs, walkways and plastic/metal guttersExcellent resistance to UV and fading

GBP 133.99
1

Watco Chemi-Coat Cold Cure Mid Grey, 4L

Watco Chemi-Coat Cold Cure Mid Grey, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99
1

Watco Cold Set Coating Mid Grey, 2.5L

Watco Cold Set Coating Mid Grey, 2.5L

Images for illustration purposes onlyWatco Cold Set Coating uses the latest polyaspartic resin technology to provide a high quality, highly wear resistant coating that can be applied at low temperatures. It is ideal for refurbishment and maintenance in unheated areas during the winter months when conventional coatings will fail to dry.Recommended areas of useRefurbishment and maintenance in unheated areasAs a coating in walk-in fridges, cold stores and loading baysFeaturesWithstands heavy wear and tearExcellent chemical resistanceCan be applied between -10C and +30CFast curingExceptional UV resistance makes it ideal for exterior application as it resists chalking, weather and fading

GBP 209.99
1

6x Watco Epoxicote High Build Anti Slip Rapid Mid Grey, 4L

6x Watco Epoxicote High Build Anti Slip Rapid Mid Grey, 4L

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 1559.94
1

Watco Epoxicote High Build Anti Slip Rapid Mid Grey, 4L EHBRASMGRY4

Watco Epoxicote High Build Anti Slip Rapid Mid Grey, 4L EHBRASMGRY4

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 299.99
1

Watco Safety Coat Food Safe Mid Grey, 2.5L

Watco Safety Coat Food Safe Mid Grey, 2.5L

Images for illustration purposes onlyWatco Safety Coat Food Safe uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry.This is an anti slip version of Watco Food Safe CoatingRecommended areas of useFood preparation environmentsCold food storage such as walk-in fridgesAreas where spillages sometimes occur, the finely textured surface is easier to clean than conventional 'gritty' surfacesFeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CSlip resistantExcellent chemical resistanceSteam cleanablePendulum Slip Test ValuesDry PTV Wet PTV65 Low slip potential 45 Low slip potential

GBP 209.99
1

Watco Flexicoat Mid Grey, 2.5L

Watco Flexicoat Mid Grey, 2.5L

Images for illustration purposes onlyWatco Flexicoat is a polyaspartic formulation designed for floors which may be subject to slight movement or cracking. Flexicoat also has excellent waterproofing and chemical resistant properties, making it the ideal coating for plant, boiler rooms or bund areas, where equipment may leak.Polyaspartic paint technology means coatings deliver higher performance such as improved durability (strength, flexibility, and resistance) , the ability for the paint to dry at extremely low temperatures, and to cure very rapidly too. Other performance benefits include outstanding scratch and chemical resistance and exceptional resistance to UV fading. And unlike epoxy coatings, polyaspartics have increased flexible properties making them the right choice for industrial floors needing incredibly strong and long-lasting protection.Recommended areas of useIdeal for floors which can move slightly due to vibrating machineryFloors which expand due to heat and moisturePlant, boiler or bund areas where equipment may leakflexible mezzanine floorsFor concrete and at least 6 month old asphaltFeaturesPolyaspartic formulation for heavy wear areasFills and bridges small cracks to cut preparation timeFlexible coating resists movement caused by vibrating machinery, expansion and contraction, moisture, slight structural movementsHelps suppress noiseCan be steam cleanedGood chemical resistanceGood sealing and waterproofing propertiesideal as a flexible, waterproof coating in plant/boiler rooms etc. where equipment may leak

GBP 209.99
1

Watco Epoxicote High Build Cold Cure Anti Slip Mid Grey, 4L

Watco Epoxicote High Build Cold Cure Anti Slip Mid Grey, 4L

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish.Epoxicote High Build Cold Cure can be applied in cold conditions and also comes in a slip resistant version.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure & Anti Slip 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 299.99
1

6x Watco Epoxicote High Build Cold Cure Anti Slip Mid Grey, 4L EHBCCASMGRY4

6x Watco Epoxicote High Build Cold Cure Anti Slip Mid Grey, 4L EHBCCASMGRY4

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish.Epoxicote High Build Cold Cure can be applied in cold conditions and also comes in a slip resistant version.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure & Anti Slip 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1559.94
1

Watco Anti Slip Epoxy Resin Floor Paint Mid Grey, 2.5L

Watco Anti Slip Epoxy Resin Floor Paint Mid Grey, 2.5L

Images for illustration purposes onlyWatco Basics Anti Slip Epoxy Resin Floor Paint is a durable two-part paint suitable for medium to heavy use. It can be applied over existing well bonded paint, or onto bare concrete where it will penetrate the surface making it easier to keep clean. A separate unit of aggregate is supplied with Anti Slip Epoxy Resin Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. Two roller applied coats will take heavy traffic including forklifts.Recommended areas of useConcrete floors in warehousesProduction areasGaragesShowrooms

GBP 79.99
1

Watco Epoxy Resin Floor Paint Mid Grey, 2.5L

Watco Epoxy Resin Floor Paint Mid Grey, 2.5L

Images for illustration purposes onlyWatco Basics Epoxy Floor Paint is a durable two-part paint suitable for medium to heavy use. It can be applied over existing well bonded paint, or onto bare concrete where it will penetrate the surface making it easier to keep clean. A separate unit of aggregate is supplied with Anti Slip Epoxy Resin Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. Two roller applied coats will take heavy traffic including forklifts.Recommended areas of useConcrete floors in warehousesProduction areasGaragesShowrooms

GBP 79.99
1

Watco Epoxy Resin Floor Paint Mid Grey, 5L

Watco Epoxy Resin Floor Paint Mid Grey, 5L

Images for illustration purposes onlyWatco Basics Epoxy Floor Paint is a durable two-part paint suitable for medium to heavy use. It can be applied over existing well bonded paint, or onto bare concrete where it will penetrate the surface making it easier to keep clean. A separate unit of aggregate is supplied with Anti Slip Epoxy Resin Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. Two roller applied coats will take heavy traffic including forklifts.Recommended areas of useConcrete floors in warehousesProduction areasGaragesShowrooms

GBP 133.99
1

Watco Anti Slip Epoxy Resin Floor Paint Mid Grey, 5L

Watco Anti Slip Epoxy Resin Floor Paint Mid Grey, 5L

Images for illustration purposes onlyWatco Basics Anti Slip Epoxy Resin Floor Paint is a durable two-part paint suitable for medium to heavy use. It can be applied over existing well bonded paint, or onto bare concrete where it will penetrate the surface making it easier to keep clean. A separate unit of aggregate is supplied with Anti Slip Epoxy Resin Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. Two roller applied coats will take heavy traffic including forklifts.Recommended areas of useConcrete floors in warehousesProduction areasGaragesShowrooms

GBP 139.99
1

Watco Safety Grip Cold Cure Mid Grey 5m2

Watco Safety Grip Cold Cure Mid Grey 5m2

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 189.99
1

6x Watco Safety Grip Cold Cure Mid Grey 5m2 Sgccmgy

6x Watco Safety Grip Cold Cure Mid Grey 5m2 Sgccmgy

Images for illustration purposes only Watco Safety Grip Cold Cure is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Watco Safety Grip Cold Cure can be applied as low as 0C, providing exceptional slip resistance in unheated areas or outside in the winter months. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Safety Grip Flex 10C 20C 30C 12 hours 8 hours 6 hours 10 hours 6 hours 3 hours 16 hours 12 hours 12 hours 24 hours 24 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 1019.94
1

Watco Resiflow Super Gloss Mid Grey, 20KG

Watco Resiflow Super Gloss Mid Grey, 20KG

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Resiflow Super Gloss into a class of its own. This one coat, high build, self-levelling epoxy resin finish, leaves a smooth, exceptionally high gloss surface, which is both attractive and easy to keep clean. This high performance formulation is usually applied at 1-2mm thick, but can be applied up to 5mm in one application. It is our ultimate floor covering for durability and appearance.Resiflow Supergloss has very good general chemical resistance, but this has been enhanced to Excellent for Resiflow Chemical Grade. If slip resistance, as well as excellent chemical resistance is important, apply one coat of Watco Protecta-Coat Anti Slip (62 PTV) , a clear, glossy, polyaspartic resin, over the top.Both grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion and flexibility, and they have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useProduction areasShowroomsReception areasClean roomsWorkshopsWarehousesSwitchgear and plant roomsFood & pharmaceutical processing, storage and laboratory areasFeaturesOur top of the range high gloss, high performance, high build epoxy resin self-levelling floor finishSuperior wear and abrasion resistance with just one 1-2mm thick applicationCan be applied up to 5mm thick if requiredExtremely easy to keep cleanExcellent resistance to oils and general chemical spillagesResiflow Chemical Grade has exceptional resistance to aggressive chemicalsPerfect for floors where high levels of hygiene are importantLow odour safe to use in confined spacesSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Curing Times Recoat Time (if required) Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 16 hours 12 hours 24 hours 48 hours 7 days20C 16 hours 8 hours 16 hours 48 hours 7 days 30C 16 hours 6 hour 16 hours 27 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99
1

Watco Resiflow Chemical Grade Mid Grey, 20KG

Watco Resiflow Chemical Grade Mid Grey, 20KG

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Resiflow Supergloss into a class of its own. This one coat, high build, self-levelling epoxy resin finish, leaves a smooth, exceptionally high gloss surface, which is both attractive and easy to keep clean. This high performance formulation is usually applied at 1-2mm thick, but can be applied up to 5mm in one application. It is our ultimate floor covering for durability and appearance.Resiflow Supergloss has very good general chemical resistance, but this has been enhanced to Excellent for Resiflow Chemical Grade. If slip resistance, as well as excellent chemical resistance is important, apply one coat of Watco Protecta-Coat Anti Slip (62 PTV) , a clear, glossy, polyaspartic resin, over the top.Both grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion and flexibility, and they have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useProduction areasShowroomsReception areasClean roomsWorkshopsChemical storage areasWarehousesSwitchgear and plant roomsFood & pharmaceutical processing, storage and laboratory areasFeaturesOur top of the range high gloss, high performance, high build epoxy resin self-levelling floor finishSuperior wear and abrasion resistance with just one 1-2mm thick applicationCan be applied up to 5mm thick if requiredExtremely easy to keep cleanExcellent resistance to oils and general chemical spillagesResiflow Chemical Grade has exceptional resistance to aggressive chemicalsPerfect for floors where high levels of hygiene are importantLow odour safe to use in confined spacesSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Curing Times Recoat Time (if required) Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 16 hours 12 hours 24 hours 48 hours 7 days20C 16 hours 8 hours 16 hours 48 hours 7 days 30C 16 hours 6 hour 16 hours 27 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

6x Watco Epoxicote High Build Anti Slip Mid Grey, 4L EHBASMGRY4

6x Watco Epoxicote High Build Anti Slip Mid Grey, 4L EHBASMGRY4

Images for illustration purposes only Watco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed. The anti slip particles are suspended in the coating making it easy to use and leaves a uniform textured finish. All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Very heavily trafficked floors Production areas Showrooms Warehouses Garages Receptions Oil & chemical areas Features Versions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti Slip One coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coat Glossy, attractive, easily cleaned finish Excellent resistance to oil and chemicals Low odour: safe to use in confined spaces Cures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temparature Recoat Time Touch Dry Light Traffic Full Use Epoxicote High Build & Anti Slip 10C 20C 30C 16 hours 10 hours 6 hours 12 hours 6 hours 4 hours 24 hours 16 hours 8 hours 48 hours 48 hours 16 hours Epoxicote Cold Cure 5C 10C 20C 30C 24 hours 16 hours 12 hours 6 hours 16 hours 12 hours 6 hours 4 hours 30 hours 24 hours 16 hours 8 hours 72 hours 48 hours 48 hours 16 hours Epoxicote Rapid, Advanced, Advanced Anti Slip 10C 20C 30C 12 hours 6 hours 4 hours 8 hours 4 hours 3 hours 16hours 8 hours 6 hours 48 hours 16hours 16 hours Full Chemical Resistance: 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1559.94
1

Watco Safety Grip Mid Grey 5m2

Watco Safety Grip Mid Grey 5m2

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 169.99
1

6x Watco Safety Grip Mid Grey 5m2 Sgmgy

6x Watco Safety Grip Mid Grey 5m2 Sgmgy

Images for illustration purposes only Watco Safety Grip is a heavy duty, coarse textured, anti slip, two pack epoxy resin coatings designed to provide a safe surface both inside and out. Using one high build coat of Safety Grip minimises the risk of accidents throughout the workplace, particularly for wet or oily areas. All grades now carry CE Mark EN 1504-2 and have test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion and hardness. They are also chemical resistant and have an A+ VOC emissions rating with a low level of VOC. Recommended areas of use Slippery, hazardous, wet or oily areas Around machinery Steps, ramps/disabled ramps, foot bridges Loading bays, walkways and entrance ways Car parks Around vibrating machinery (see Safety Grip Flex) Temperature Recoat Time Touch Dry Light Traffic Heavy Traffic Safety Grip 10C 20C 30C 16 hours 12 hours 8 hours 12 hours 6 hours 4 hours 24 hours 16 hours 12 hours 36 hours 24 hours 24 hours Safety Grip Rapid 10C 20C 30C 12 hours 8 hours 6 hours 8 hours 4 hours 3 hours 16 hours 8 hours 8 hours 36 hours 24 hours 24 hours Safety Grip Cold Cure 0C 10C 20C 20 hours 12 hours 10 hours 12 hours 8 hours 6 hours 24 hours 16 hours 16 hours 48 hours 36 hours 24 hours Full Chemical Resistance: 7 days Light Traffic: foot, trolley, pallet truck, occasional forklift Heavy Traffic: regular forklift, heavy footfall, parked vehicles

GBP 959.94
1

Watco Floor Paint Mid Grey, 5L

Watco Floor Paint Mid Grey, 5L

Images for illustration purposes onlyWatco Basics Floor Paint is based on a tough solvent based polyurethane formula which makes it ideal for general use. It can be applied over existing well bonded paint, or onto bare concrete, making cleaning easier. A separate unit of aggregate is supplied with Anti Slip Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. For heavier wear areas, or areas where vehicles will be parked, we recommend a Epoxy Resin Floor Paint to resist picking under parked car tyres.Recommended areas of useAny concrete floor subject to light-medium use.Can also be applied to wood and metal.

GBP 89.99
1

Watco Floor Paint Mid Grey, 2.5L

Watco Floor Paint Mid Grey, 2.5L

Images for illustration purposes onlyWatco Basics Floor Paint is based on a tough solvent based polyurethane formula which makes it ideal for general use. It can be applied over existing well bonded paint, or onto bare concrete, making cleaning easier. A separate unit of aggregate is supplied with Anti Slip Floor Paint, which is mixed into the paint to provide a finely textured slip resistant surface. For heavier wear areas, or areas where vehicles will be parked, we recommend a Epoxy Resin Floor Paint to resist picking under parked car tyres.Recommended areas of useAny concrete floor subject to light-medium use.Can also be applied to wood and metal.

GBP 63.99
1

Watco Chemi-Coat Anti Slip Mid Grey, 4L

Watco Chemi-Coat Anti Slip Mid Grey, 4L

Images for illustration purposes onlyWatco Chemi-Coat Anti Slip is a one coat high build epoxy resin coating which offers excellent slip resistance and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer.Recommended areas of useAreas where chemical spillage or heavy wear occur.FeaturesHard aluminium oxide grit for maximum wear resistanceTough epoxy resin base resistant to many chemicalsLow solvent contentSuperb glossy appearanceEasy to apply - aluminium oxide grit is pre-blended into the curing agent, so this is a simple two componant application

GBP 289.99
1

Watco Epoxicote High Build Cold Cure Mid Grey, 4L

Watco Epoxicote High Build Cold Cure Mid Grey, 4L

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed.Epoxicote High Build Cold Cure can be applied in cold conditions and also comes in a slip resistant version.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temperature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 279.99
1

6x Watco Epoxicote High Build Cold Cure Mid Grey, 4L EHBCCMGRY4

6x Watco Epoxicote High Build Cold Cure Mid Grey, 4L EHBCCMGRY4

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Epoxicote High Build into a class of its own. This one coat, high build, virtually solvent free epoxy resin floor coating, guarantees exceptional wear and offers superior protection for concrete floors. The rapid versions cure within just 8 hours to withstand light traffic saving on downtime, whilst the anti slip versions provide a good level of slip resistance where needed.Epoxicote High Build Cold Cure can be applied in cold conditions and also comes in a slip resistant version.All grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion, slip resistance and flexibility. They also offer superior chemical resistance, and have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useVery heavily trafficked floorsProduction areasShowroomsWarehousesGaragesReceptionsOil & chemical areasFeaturesVersions available: Epoxicote High Build, Epoxicote High Build Rapid, Epoxicote High Build Anti Slip, Epoxicote High Build Anti Slip Rapid, Epoxicote High Build Cold Cure, Epoxicote High Build Cold Cure Anti Slip, Epoxicote High Build Advanced, Epoxicote High Build Advanced Anti SlipOne coat, high build epoxy resin coating: gives excellent wear and abrasion resistance with just one coatGlossy, attractive, easily cleaned finishExcellent resistance to oil and chemicalsLow odour: safe to use in confined spacesCures within 8 hours to withstand light traffic (see Rapid versions) Superior performance demonstrated by ISO testing to CE Mark EN1504-2 Temperature Recoat Time Touch Dry Light Traffic Full UseEpoxicote High Build & Anti Slip 10C20C30C 16 hours10 hours6 hours 12 hours6 hours4 hours 24 hours16 hours8 hours 48 hours48 hours16 hoursEpoxicote Cold Cure 5C10C20C30C 24 hours16 hours12 hours6 hours 16 hours12 hours6 hours4 hours 30 hours24 hours16 hours8 hours 72 hours48 hours48 hours16 hoursEpoxicote Rapid, Advanced, Advanced Anti Slip 10C20C30C 12 hours6 hours4 hours 8 hours4 hours3 hours 16hours8 hours6 hours 48 hours16hours16 hoursFull Chemical Resistance: 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 1559.94
1