40 results (0,14923 seconds)

Show all filters

Brand

Show all

Colour

Size

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Watco Tactile Plates Blister Onstreet, Tile Red 400X400

Watco Tactile Plates Blister Onstreet, Tile Red 400X400

Images for illustration purposes onlyFeaturesThe surface is coated with aluminium oxide grit for slip resistance and high wear resistanceRaised floor tiles are glued and screwed to the existing substrate to avoid costly excavationOnly 4mm thickVirtually indestructible GRP that is rot resistantThree different styles are availableCorduroy Version - Warns visually impaired people of the presence of hazards such as stairs or pedestrian crossings.On Street Version - Indicates the edge of a footway near a crossing. Designed with 36 blisters in regular rows and columns on each tile, it helps prevent the visually impaired from inadvertantly walking into a vehicular route.Off Street Version - The blisters on this tile run parallel in one direction, but are irregular in the other direction. This indicates that movement in one direction is safe, and is ideal for train or light rail platforms.

GBP 51.99
1

Watco Asphalt Resurfacer Tile Red, 25KG

Watco Asphalt Resurfacer Tile Red, 25KG

Images for illustration purposes onlyWatco Asphalt & Concrete Resurfacer seals and resurfaces damaged and worn asphalt. It forms a flexible, sealed, waterproof surface that transforms old asphalt and tarmac.Recommended areas of useCar parksFloorsGarageYardWalkwaysManufacturing/Production AreasFeaturesEasy 12" Paint Roller or paint brush applicationMatt, slip resistant surfaceNo primer requiredNon-hazardous and low odour acrylic formulaFlexible system to cope with natural movements in the asphaltExcellent adhesion and covering powerQuick drying (24 hours for light traffic) Excellent resistance to UV and weatheringCan be applied at 1mm to 2mm in one layer, several layers, can be applied to cover badly worn patchesSuitable for pedestrian and light-medium traffic (cars, not HGVs or forklifts) Available in Black, Tile Red, Green and Dark Grey

GBP 229.99
1

Watco Flexicoat Tile Red, 2.5L

Watco Flexicoat Tile Red, 2.5L

Images for illustration purposes onlyWatco Flexicoat is a polyaspartic formulation designed for floors which may be subject to slight movement or cracking. Flexicoat also has excellent waterproofing and chemical resistant properties, making it the ideal coating for plant, boiler rooms or bund areas, where equipment may leak.Polyaspartic paint technology means coatings deliver higher performance such as improved durability (strength, flexibility, and resistance) , the ability for the paint to dry at extremely low temperatures, and to cure very rapidly too. Other performance benefits include outstanding scratch and chemical resistance and exceptional resistance to UV fading. And unlike epoxy coatings, polyaspartics have increased flexible properties making them the right choice for industrial floors needing incredibly strong and long-lasting protection.Recommended areas of useIdeal for floors which can move slightly due to vibrating machineryFloors which expand due to heat and moisturePlant, boiler or bund areas where equipment may leakflexible mezzanine floorsFor concrete and at least 6 month old asphaltFeaturesPolyaspartic formulation for heavy wear areasFills and bridges small cracks to cut preparation timeFlexible coating resists movement caused by vibrating machinery, expansion and contraction, moisture, slight structural movementsHelps suppress noiseCan be steam cleanedGood chemical resistanceGood sealing and waterproofing propertiesideal as a flexible, waterproof coating in plant/boiler rooms etc. where equipment may leak

GBP 209.99
1

Watco Epoxy Matt Coat Tile Red

Watco Epoxy Matt Coat Tile Red

Images for illustration purposes only Watco Epoxy Matt Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Epoxy Matt Coat may be desirable to reduce glare or help hide minor imperfections in a worn concrete floor. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 259.99
1

Watco Chemi-Coat Tile Red, 4L

Watco Chemi-Coat Tile Red, 4L

Images for illustration purposes only Watco Chemi-Coat is a one coat high build epoxy resin coating which offers excellent durability and chemical resistance. Provides a superb glossy, hygienic and easily cleaned surface. A single coat is usually sufficient. Very porous surfaces should be treated first with Watco 4 Hour Epoxy Primer. Features Excellent resistance to many chemicals Suitable for a variety of floor and wall surfaces Low solvent content Approved for use on sand and cement screed or concrete with under floor heating systems (up to 30C surface temperature) Coverage approx. 18m per 4L pack maximum allowing for one coat by roller. Brush application may result in reduced coverage One coat normally sufficient

GBP 279.99
1

Watco Epoxy Gloss Coat Tile Red

Watco Epoxy Gloss Coat Tile Red

Images for illustration purposes only Watco Epoxy Gloss Coat has been re-formulated to produce a Best in Class water based epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save re-coating costs. The rapid drying formula also allows the application of two coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. All grades now carry CE Mark EN1504-2 and have impressive test results for abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant and safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of use Warehouse Production Areas Workshops Showrooms Most heavily trafficked floors Features Tough, hard wearing floor finish for heavy wear areas Apply to bare or previously painted surfaces Easy roller, low odour application Apply 2 coats in one day to reduce downtime Available in 190 RAL colours Gloss, Matt or Hygienic versions available Tested safe for use in food production areas Superior performance demonstrated by ISO testing to CE mark EN1504-2 Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance 10C 6-8 hours 4 hours 16 hours 48 hours 7 days 20C 4-6 hours 2 hours 12 hours 24 hours 7 days 30C 14 hours 1 hour 12 hours 24 hours 7 days Light Traffic: Foot, trolley, pallet truck, occasional forklift Heavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 219.99
1

Watco Resiflow Super Gloss Tile Red, 20KG

Watco Resiflow Super Gloss Tile Red, 20KG

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Resiflow Super Gloss into a class of its own. This one coat, high build, self-levelling epoxy resin finish, leaves a smooth, exceptionally high gloss surface, which is both attractive and easy to keep clean. This high performance formulation is usually applied at 1-2mm thick, but can be applied up to 5mm in one application. It is our ultimate floor covering for durability and appearance.Resiflow Supergloss has very good general chemical resistance, but this has been enhanced to Excellent for Resiflow Chemical Grade. If slip resistance, as well as excellent chemical resistance is important, apply one coat of Watco Protecta-Coat Anti Slip (62 PTV) , a clear, glossy, polyaspartic resin, over the top.Both grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion and flexibility, and they have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useProduction areasShowroomsReception areasClean roomsWorkshopsWarehousesSwitchgear and plant roomsFood & pharmaceutical processing, storage and laboratory areasFeaturesOur top of the range high gloss, high performance, high build epoxy resin self-levelling floor finishSuperior wear and abrasion resistance with just one 1-2mm thick applicationCan be applied up to 5mm thick if requiredExtremely easy to keep cleanExcellent resistance to oils and general chemical spillagesResiflow Chemical Grade has exceptional resistance to aggressive chemicalsPerfect for floors where high levels of hygiene are importantLow odour safe to use in confined spacesSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Curing Times Recoat Time (if required) Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 16 hours 12 hours 24 hours 48 hours 7 days20C 16 hours 8 hours 16 hours 48 hours 7 days 30C 16 hours 6 hour 16 hours 27 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 249.99
1

Watco Food Safe Coating Tile Red 2.5L

Watco Food Safe Coating Tile Red 2.5L

Images for illustration purposes onlyWatco Food Safe Coating uses the latest polyaspartic resin technology for a high quality, highly wear resistant coating that has been tested and has EN71/3 and taint test certification. It is ideal for normal food preparation environments as well as cold food storage areas such as walk-in fridges. It will cure in refrigerated areas (down to -10C) where other conventional paints will fail to dry. FeaturesTested to EN71/3 as a non-toxic productTakes heavy wear and tearFast curing, re-coatable in only 5 hoursCan be applied between -10C and 30CExcellent chemical resistanceSteam cleanable

GBP 199.99
1

Watco Resiflow Chemical Grade Tile Red, 20KG

Watco Resiflow Chemical Grade Tile Red, 20KG

Images for illustration purposes onlyWatco has developed a highly advanced formulation that puts Resiflow Supergloss into a class of its own. This one coat, high build, self-levelling epoxy resin finish, leaves a smooth, exceptionally high gloss surface, which is both attractive and easy to keep clean. This high performance formulation is usually applied at 1-2mm thick, but can be applied up to 5mm in one application. It is our ultimate floor covering for durability and appearance.Resiflow Supergloss has very good general chemical resistance, but this has been enhanced to Excellent for Resiflow Chemical Grade. If slip resistance, as well as excellent chemical resistance is important, apply one coat of Watco Protecta-Coat Anti Slip (62 PTV) , a clear, glossy, polyaspartic resin, over the top.Both grades now carry CE Mark EN1504-2 and have impressive test results for hardness, abrasion, scratch and impact resistance, as well as for adhesion and flexibility, and they have an A+ VOC emissions rating with a low level of VOC.Recommended areas of useProduction areasShowroomsReception areasClean roomsWorkshopsChemical storage areasWarehousesSwitchgear and plant roomsFood & pharmaceutical processing, storage and laboratory areasFeaturesOur top of the range high gloss, high performance, high build epoxy resin self-levelling floor finishSuperior wear and abrasion resistance with just one 1-2mm thick applicationCan be applied up to 5mm thick if requiredExtremely easy to keep cleanExcellent resistance to oils and general chemical spillagesResiflow Chemical Grade has exceptional resistance to aggressive chemicalsPerfect for floors where high levels of hygiene are importantLow odour safe to use in confined spacesSuperior performance demonstrated by ISO testing to CE Mark EN1504-2Curing Times Recoat Time (if required) Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 16 hours 12 hours 24 hours 48 hours 7 days20C 16 hours 8 hours 16 hours 48 hours 7 days 30C 16 hours 6 hour 16 hours 27 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

Watco Safety Coat Hygienic Bef Tile Red

Watco Safety Coat Hygienic Bef Tile Red

Images for illustration purposes onlyWatco Safety Coat has been re-formulated to produce a Best in Class water based, anti slip epoxy resin. This tough, easy to use coating now dries faster to reduce downtime and lasts longer to save recoating costs. The rapid drying formula also allows the application of 2 coats in one day. Our unique blend of the best resins available provide an attractive, low maintenance, hard wearing floor finish which lasts and lasts. Safety Coat Hygienic incorporates Silver Ion technology and is ideal for areas where slip resistance, cleanliness and hygiene are as important as a hard wearing finish. All grades now carry CE Mark EN1504-2 and have impressive test results for slip resistance, abrasion, scratch and impact resistance, as well as for adhesion, hardness and flexibility. They are also breathable, chemical resistant, safe for food production areas. The range carries an A+ VOC emissions rating with a low level of VOC. All tests have been undertaken to ISO standard where applicable and demonstrated this Best Ever Formulation to be 40% harder wearing than previously. Recommended areas of useWarehouseProduction AreasWorkshopsShowroomsPotentially slippery, heavy wear areasFeaturesTough, hard wearing floor finish for heavy wear areasPre-blended aggregate provides an evenly textured finishApply to bare or previously painted surfacesEasy roller, low odour applicationApply 2 coats in one day to reduce downtimeAvailable in 190 RAL coloursTested safe for use in food production areasSuperior performance demonstrated by ISO testing to CE mark EN1504-2Curing Times Recoat Time Touch Dry Light Traffic Heavy Traffic Full Chemical Resistance10C 6-8 hours 4 hours 16 hours 48 hours 7 days20C 4-6 hours 2 hours 12 hours 24 hours 7 days30C 4 hours 1 hour 12 hours 24 hours 7 daysLight Traffic: Foot, trolley, pallet truck, occasional forkliftHeavy Traffic: Regular forklift, heavy footfall, parked vehicles

GBP 309.99
1

Watco Chemi-Coat Cold Cure Tile Red, 4L

Watco Chemi-Coat Cold Cure Tile Red, 4L

Images for illustration purposes onlyChemi-Coat Cold Cure is a one coat tough industrial paint with excellent durability and chemical resistance. It is suitable for a variety of floor surfaces as well as being solvent free. It provides a superb glossy, hygienic and easily cleaned surface and will cure at temperatures as low as 0C. It allows refrigeration areas and unheated warehousing to be painted and protected at any time of the year.FeaturesExcellent resistance to many chemicalsSuitable for a variety of floor and wall surfacesVirtually solvent freeReady for heavy traffic after 48 hours at 5C

GBP 299.99
1

Watco Heavy Duty Asphalt Paint Tile Red 5L

Watco Heavy Duty Asphalt Paint Tile Red 5L

Images for illustration purposes onlyWatco Heavy Duty Asphalt Paint is the ideal coating to transform and brighten up asphalt in heavier wear areas. It is quick and easy to use for painting large areas, and ideal for highlighting hazards, marking out parking bays and pedestrian areas, and for using with Watco Stencils.Our unique formulation creates a flexible, waterproofing coating thats most suited for use in light to medium trafficked areas, such as private car parks, driveways, tennis courts, playgrounds and warehouses. Watco Heavy Duty Asphalt Paint is available for heavier wear areas. It is quick and easy to use for painting large areas, and ideal for highlighting hazards, marking out parking bays and pedestrian areas, and for using with Watco Stencils.It has excellent UV resistance which helps protect against fading.Asphalt Paint carries CE Mark EN 1504-2 and has impressive test results for hardness, abrasion, adhesion, impact and flexibility.Its virtually solvent free and has an A+ VOC emissions rating.Recommended areas of useMarking out parking bays and pedestrian walkwaysColour coding and highlighting hazardous areasPlaygroundsTennis courtsDrivewaysFeaturesTransforms, dull, drab asphalt and tarmacExcellent resistance to UV and weatheringFlexible water based acrylic quick and easy to useColours, protects and waterproofs with just one coatHigh pigment level offers excellent hiding powerBreathableCan be applied to damp surfacesVirtually solvent free and odourless safe to use inside as well as outsideSuitable for both asphalt and concreteSuperior performance demonstrated by ISO testing to CE Mark EN1504-2 Drying Time Recoat Time Touch Dry Light Traffic Full Use 10C 16 hours 8 hours 48 hours 72 hours 20C 6 hours 4 hours 24 hours 48 hours 30C 3 hours 2 hour 12 hours 24 hours Light Traffic: FootMedium Traffic: Cars, trolley, pallet truck

GBP 159.99
1

Watco Safety Coat Cold Cure Tile Red, 2.5L

Watco Safety Coat Cold Cure Tile Red, 2.5L

Images for illustration purposes onlyWatco Safety Coat Cold Cure is a new type of anti slip resin formulation that can be applied as low as minus 10C. This high performance coating can be applied in cold conditions where conventional coatings will fail to dry. It is most suited for use in heavily trafficked unheated areas such as workshops, warehouses, loading bays and cold stores. If a coarser textured finish is required for spillage areas or ramps, please see instead Watco Safety Grip Cold Cure (wet PTV 69) Safety Coat Cold Cure is extremely resistant to UV and has excellent resistance to weathering, making it a versatile, all year round coating. The finely textured particles are spherical; this makes it easier to keep clean compared to other anti slip coatings which contain a coarse, more angular type grit. Safety Coat Cold Cure carries CE Mark EN1504-2 and has impressive test results for slip resistance, abrasion and impact resistance, as well as for adhesion and hardness.Recommended areas of useWalk in fridges and freezerCold storesProduction areasLoading baysUnheated areasWarehouses and workshopsFeaturesHigh performance, two part, anti slip, polyaspartic resin formulationEasy clean, anti slip surfaceCan be applied at temperatures as low as -10C and as high as 25CExcellent resistance to UV and weatheringFast curing ready for heavy traffic in just 16 hoursSuperior abrasion and scratch resistanceExtremely strong easily copes with forklift trucksSuperior performance demonstrated by ISO testing to CE Mark EN1504-2

GBP 209.99
1