15 results (0,13939 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

System Sensor B501AP Analogue Sensor Base Pure White

System Sensor B501AP Analogue Sensor Base Pure White

System Sensor B501AP Analogue Sensor Base Pure WhiteThe System Sensor B504AP is an analogue sensor base with SEMS screw connections for isolated and non-isolated detectors and address identification label.The B501AP Base is designed to accept S200 detectors and has a tamper resistant feature which can be enabled by breaking off a plastic tab. When enabled the detector cannot be removed without a suitable tool. The base can be labelled with a break-off address tag. Available in white ivory and black colours.

GBP 4.13
1

Apollo Backplate 45681-233APO

Apollo Backplate 45681-233APO

Apollo Backplate 45681-233APOThe Back plate provides a high degree of protection against the ingress of water or dust into the back of the detector mounted directly onto a mounting box.When the back plate is used with either a Discovery or an XP95 device the number tab of the XPERT card must be snapped off and placed in one of the knockout slots provided in the back plate.Key Features Protects against dust and dirt ingressImproved performanceFits Discovery XP95 Orbis Series 65 and AlarmSense bases

GBP 2.70
1

Cooper CDBB300 Conventional Detector Mounting Base EFXN520

Cooper CDBB300 Conventional Detector Mounting Base EFXN520

Cooper CDBB300 Conventional Detector Mounting Base EFXN520 Please note this will not work on the Legacy Menvier PanelsThe EFXN520 conventional standard base has been specifically designed to be compatible with the Cooper JSB range of conventional detectors. This standard base has been designed for flexibility simplicity and speed of installation.It incorporates purpose designed devices to provide fault warning if detector is removed whilst maintaining full zone wiring integrity. The base has a schotty diode in series with the negative terminals to enable fault monitoring and allow the circuit to continue if a detector is removed.Key FeaturesQuick and simple to installSeparate zone in and zone out terminalsStand-off fixing featureSelectable detector lockingBenefitsAccepts side entry surface cablesCommon base for JSB conventional detectorsInstallationBase incorporates a retaining clip to provide positive feedback when detector is correctly fitted.Separate terminals are provided for zone in and zone out connections.Each terminal can accept up to 2 x 2.5mm cablesBase incorporates a substantial cable entry aperture in the rear of the base.Breakouts are provided to enable the detector base to sit neatly over surface cables and then enter via the rear entry aperture.Base mounting incorporates a stand-off feature to help prevent distortion when mounted on anuneven surface.Fixings are suitable for standard BESA box or direct fixing to suitable surfaceOptional locking devices supplied with base to prevent unauthorised detector removal.

GBP 4.02
1

Cooper EFXN520 Common Mounting Base

Cooper EFXN520 Common Mounting Base

Cooper EFXN520 Common Mounting Base for Bi-Wire UltraThe FXN520 conventional standard base has been specifically designed to be compatible with the JSB range of conventional detectors. This standard base has been designed for flexibility simplicity and speed of installation. It incorporates purpose designed devices to provide fault warning if detector is removed whilst maintaining full zone wiring integrity. The base has a schotty diode in series with the negative terminals to enable fault monitoring and allow the circuit to continue if a detector is removed.Key FeaturesQuick and simple to installSeparate zone in and zone out terminalsStand-off fixing featureSelectable detector lockingBenefitsAccepts side entry surface cablesCommon base for JSB conventional detectors

GBP 4.02
1

Cooper CAB300 Intelligent Addressable Common Mounting Base FXN720 MAB800

Cooper CAB300 Intelligent Addressable Common Mounting Base FXN720 MAB800

Cooper CAB300 Intelligent Addressable Common Mounting Base FXN720 MAB800The intelligent addressable sensor standard base CAB300 has been designed for flexibility simplicity and speed of installation. The CAB300 is compatible with the Cooper range of intelligent addressable sensors and fire systems.This intelligent addressable standard base incorporates a purpose designed shorting link to ensure wiring continuity if a sensor is removed. This device also has a retaining clip to provide positive feedback when the sensor is correctly fitted and a retaining clip that can be replaced with locking device supplied with base to prevent unauthorised sensor removal.Key FeaturesIntegral sensor shorting linkSeparate loop in and loop out terminalsStand-off fixing featureAccepts side entry cablesSelectable sensor locking featureBenefitsQuick and simple to installCommon mounting base for Cooper intelligent addressable sensorsPositive lock indicationMultiple cable entry pointsEasy to maintainservice

GBP 3.71
1

Fire Exit Arrow Down - Vinyl 400mm x 150mm FEADV

Fire Exit Arrow Down - Vinyl 400mm x 150mm FEADV

Fire Exit Arrow Down - Vinyl 400mm x 150mm FEADVA Fire Exit sign which has an arrow down and comes in the finish Vinyl and is 400mm x 150mm.Vinyl signs are self-adhesive with a simple protective peel-off sheet making them easy to position without any additional fixings. They are a perfect solution for temporary signage and the flexible material makes them simple to apply on curved or irregular surfaces.Vinyl signs are suitable for both interior and exterior applications. All signs including symbols conform to EU-Standard ISO 7010 where applicable.Key FeaturesSize 400mm x 150mmVinyl FinishDesigned to identify escape routes in a fire emergencyShould be fitted in prominent location to aid fast and efficient evacuationConforms to EN ISO 70102012Highly durable made from either durable rigid plastic or self-adhesive flexible vinylEasy to apply both sign types come with their own adhesive

GBP 3.34
1

Fire Exit Sign Arrow Up Vinyl 400mm x 150mm FEAUV

Fire Exit Sign Arrow Up Vinyl 400mm x 150mm FEAUV

Fire Exit Sign Arrow Up Vinyl 400mm x 150mm FEAUVA Fire Exit sign which has an arrow up it comes in the finish Vinyl and is 400mm x 150mm.Vinyl signs are self-adhesive with a simple protective peel-off sheet making them easy to position without any additional fixings. They are a perfect solution for temporary signage and the flexible material makes them simple to apply on curved or irregular surfaces.Vinyl signs are suitable for both interior and exterior applications. All signs including symbols conform to EU-Standard ISO 7010 where applicable.Key FeaturesSize 400mm x 150mmVinyl FinishDesigned to identify escape routes in a fire emergencyShould be fitted in prominent location to aid fast and efficient evacuationConforms to EN ISO 70102012Highly durable made from either durable rigid plastic or self-adhesive flexible vinylEasy to apply both sign types come with their own adhesive

GBP 3.34
1

Fire Exit Sign Arrow Up amp Right Vinyl 400mm x 150mm FEAURV

Fire Exit Sign Arrow Up amp Right Vinyl 400mm x 150mm FEAURV

Fire Exit Sign Arrow Up Right Vinyl 400mm x 150mm FEAURVA Fire Exit sign which has an arrow up and to the right it comes in the finish Vinyl and is 400mm x 150mm.Vinyl signs are self-adhesive with a simple protective peel-off sheet making them easy to position without any additional fixings. They are a perfect solution for temporary signage and the flexible material makes them simple to apply on curved or irregular surfaces.Vinyl signs are suitable for both interior and exterior applications. All signs including symbols conform to EU-Standard ISO 7010 where applicable.Key FeaturesSize 400mm x 150mmVinyl FinishDesigned to identify escape routes in a fire emergencyShould be fitted in prominent location to aid fast and efficient evacuationConforms to EN ISO 70102012Highly durable made from either durable rigid plastic or self-adhesive flexible vinylEasy to apply both sign types come with their own adhesive

GBP 3.34
1

Fire Exit Sign Arrow Left Vinyl 400mm x 150mm FEALV

Fire Exit Sign Arrow Left Vinyl 400mm x 150mm FEALV

Fire Exit Sign Arrow Left Vinyl 400mm x 150mm FEALVA Fire Exit sign which has an arrow to the left it comes in the finish Vinyl and is 400mm x 150mm.Vinyl signs are self-adhesive with a simple protective peel-off sheet making them easy to position without any additional fixings. They are a perfect solution for temporary signage and the flexible material makes them simple to apply on curved or irregular surfaces.Vinyl signs are suitable for both interior and exterior applications. All signs including symbols conform to EU-Standard ISO 7010 where applicable.Key FeaturesSize 400mm x 150mmVinyl FinishDesigned to identify escape routes in a fire emergencyShould be fitted in prominent location to aid fast and efficient evacuationConforms to EN ISO 70102012Highly durable made from either durable rigid plastic or self-adhesive flexible vinylEasy to apply both sign types come with their own adhesive

GBP 3.34
1

Fire Exit Sign Arrow Up amp Left Vinyl 400mm x 150mm FEAULV

Fire Exit Sign Arrow Up amp Left Vinyl 400mm x 150mm FEAULV

Fire Exit Sign Arrow Up Left Vinyl 400mm x 150mm FEAULVA Fire Exit sign which has an arrow up and to the left it comes in the finish Vinyl and is 400mm x 150mm.Vinyl signs are self-adhesive with a simple protective peel-off sheet making them easy to position without any additional fixings. They are a perfect solution for temporary signage and the flexible material makes them simple to apply on curved or irregular surfaces.Vinyl signs are suitable for both interior and exterior applications. All signs including symbols conform to EU-Standard ISO 7010 where applicable.Key FeaturesSize 400mm x 150mmVinyl FinishDesigned to identify escape routes in a fire emergencyShould be fitted in prominent location to aid fast and efficient evacuationConforms to EN ISO 70102012Highly durable made from either durable rigid plastic or self-adhesive flexible vinylEasy to apply both sign types come with their own adhesive

GBP 3.34
1

Fire Exit Arrow Down Left - Vinyl 400mm x 150mm - FEADLV

Fire Exit Arrow Down Left - Vinyl 400mm x 150mm - FEADLV

Fire Exit Arrow Down Left - Vinyl 400mm x 150mm - FEADLVA Fire Exit sign which has an arrow down and left. It comes in the finish Vinyl and is 400mm x 150mm.Vinyl signs are self-adhesive with a simple protective peel-off sheet making them easy to position without any additional fixings. They are a perfect solution for temporary signage and the flexible material makes them simple to apply on curved or irregular surfaces.Vinyl signs are suitable for both interior and exterior applications. All signs including symbols conform to EU-Standard ISO 7010 where applicable.Key FeaturesSize 400mm x 150mmVinyl FinishDesigned to identify escape routes in a fire emergencyShould be fitted in prominent location to aid fast and efficient evacuationConforms to EN ISO 70102012Highly durable made from either durable rigid plastic or self-adhesive flexible vinylEasy to apply both sign types come with their own adhesive

GBP 3.34
1

Fire Exit Sign Arrow Right Vinyl 400mm x 150mm FEARV

Fire Exit Sign Arrow Right Vinyl 400mm x 150mm FEARV

Fire Exit Sign Arrow Right Vinyl 400mm x 150mm FEARVA Fire Exit sign which has an arrow to the right it comes in the finish Vinyl and is 400mm x 150mm.Vinyl signs are self-adhesive with a simple protective peel-off sheet making them easy to position without any additional fixings. They are a perfect solution for temporary signage and the flexible material makes them simple to apply on curved or irregular surfaces.Vinyl signs are suitable for both interior and exterior applications. All signs including symbols conform to EU-Standard ISO 7010 where applicable.Key FeaturesSize 400mm x 150mmVinyl FinishDesigned to identify escape routes in a fire emergencyShould be fitted in prominent location to aid fast and efficient evacuationConforms to EN ISO 70102012Highly durable made from either durable rigid plastic or self-adhesive flexible vinylEasy to apply both sign types come with their own adhesive

GBP 3.34
1

Fire Exit Arrow Down Right - Vinyl 400mm x 150mm - FEADRV

Fire Exit Arrow Down Right - Vinyl 400mm x 150mm - FEADRV

Fire Exit Arrow Down Right - Vinyl 400mm x 150mm - FEADRVA Fire Exit sign which has an arrow down and to the right comes in the finish Vinyl and is 400mm x 150mm.Vinyl signs are self-adhesive with a simple protective peel-off sheet making them easy to position without any additional fixings. They are a perfect solution for temporary signage and the flexible material makes them simple to apply on curved or irregular surfaces.Vinyl signs are suitable for both interior and exterior applications. All signs including symbols conform to EU-Standard ISO 7010 where applicable.Key FeaturesSize 400mm x 150mmVinyl FinishDesigned to identify escape routes in a fire emergencyShould be fitted in prominent location to aid fast and efficient evacuationConforms to EN ISO 70102012Highly durable made from either durable rigid plastic or self-adhesive flexible vinylEasy to apply both sign types come with their own adhesive

GBP 3.34
1

Carrier N-MC-S-G Surface Mount Accessory Compatible With Manual Call Points

Carrier N-MC-S-G Surface Mount Accessory Compatible With Manual Call Points

Carrier N-MC-S-G Surface Mount Accessory Compatible With Manual Call PointsThe N-MC-S-G is a surface mount accessory compatible with manual call points. It offers the possibility to cover unsightly gaps between the wall and a recess mount manual call point for recess mount applications when the holes in the wall are not perfectly cut. With its matching green colour and same aesthetic design as the manual call point it finishes off any recess mount application beautifully.InstallationThe N-MC-S-G requires no special tools or additional parts for installation. It is simply placed between the manual call point front and the wall for most standard applications and attaches with the same screws that normally fits the manual call point to its standard back box. If special mounting options are required with other fitment locations for other types of wall boxes the trim skirt may be paired with a recess mount adaptor allowing additional fitment options for installations on most high-quality European wall boxes.Details Covers uneven cut holes in the wall when recessed wall boxes are used Matches the colour and design of the manual call point allowing for an aesthetic integrated look Various mounting options allow for an easy fit with most European wall boxes Pairs with manual call point recess mount accessory for use with 3rd party back boxes

GBP 3.05
1

Carrier N-MC-S-R Surface Mount Accessory Compatible With Manual Call Points

Carrier N-MC-S-R Surface Mount Accessory Compatible With Manual Call Points

Carrier N-MC-S-R Surface Mount Accessory Compatible With Manual Call PointsThe N-MC-S-R is a surface mount accessory compatible with manual call points. It offers the possibility to cover unsightly gaps between the wall and a recess mount manual call point for recess mount applications when the holes in the wall are not perfectly cut. With its matching green colour and same aesthetic design as the manual call point it finishes off any recess mount application beautifully.InstallationThe N-MC-S-R requires no special tools or additional parts for installation. It is simply placed between the manual call point front and the wall for most standard applications and attaches with the same screws that normally fits the manual call point to its standard back box. If special mounting options are required with other fitment locations for other types of wall boxes the trim skirt may be paired with a recess mount adaptor allowing additional fitment options for installations on most high-quality European wall boxes.Details Covers uneven cut holes in the wall when recessed wall boxes are used Matches the colour and design of the manual call point allowing for an aesthetic integrated look Various mounting options allow for an easy fit with most European wall boxes Pairs with manual call point recess mount accessory for use with 3rd party back boxes

GBP 3.34
1