25 results (0,15419 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Testifire XTR2 TESTIFIRE-SOP-001 Stand-off Plate

Testifire XTR2 TESTIFIRE-SOP-001 Stand-off Plate

Testifire XTR2 TESTIFIRE-SOP-001 Stand-off PlateTestifire XTR2 is the next generation of our popular Testifire product however it is much more than just a functional test tool. Testifire XTR2 has compliance at its core its unique features enable compliant testing to be carried out and via an App and supporting cloud-portal ensure test results can be recorded automatically at the time of test giving fire service managers and building owners the ultimate proof of test.Whats in the reportThe test report is automatically generated on-site once the final detector has been tested. Its then immediately available for viewing by the relevant team members at the service company and then be sent to the client along with any other relevant documentation. The report combines all the data needed to prove testing has taken place and confirms the status of each detector automatically highlighting any areas of concern at the top of the document.Key FeaturesStand-off plate fitted within the Testifire XTR2 cup

GBP 16.31
1

Elmdene MPR002 Multipurpose Relay

Elmdene MPR002 Multipurpose Relay

Elmdene MPR002 Multipurpose RelayThe MPR002 is a useful device that provides two sets of relay changeover contacts capable of being driven from a normal 12 or 24V supply or a low current source.Key FeaturesTwo sets of changeover contactsMaximum rating 1A 24v dc24v dc operation and trigger inputTrigger Selection Option JP1JP1 On - Relay switches on application of supplyJP1 Off - Relay switches on application of V low current triggerSupplied with sticky feet for fixing3 year warrantyPlease note The image is for illustrative purposes only. Pleasecontact usfor further information.

GBP 14.41
1

C-Tec BF326RF Fire Alarm Mains Isolator Keyswitch - Red Flush

C-Tec BF326RF Fire Alarm Mains Isolator Keyswitch - Red Flush

C-Tec BF326RF Fire Alarm Mains Isolator Keyswitch - Red FlushThe Fire Alarm Mains Isolator Keyswitch allows the mains toa fire alarm control panel to be switched on or off as per the requirements ofBS5839-1.Key FeaturesDouble poleFitted with 5A FuseSupplied with a special key that is only available to theresponsible personAble to be wired with 1 x 2.5mm2 cable or 2 x 1.5mm2 cableto ensure only independent sole main supplies are used to the fire panel as perBS5839-1 requirementsCan be labelled for use with an Evacuation Alert orEmergency Voice Communication System EVCS using a BF326LABEL

GBP 15.05
1

C-Tec BF326RS Fire Alarm Mains Isolator Keyswitch - Red Surface Includes Back Box

C-Tec BF326RS Fire Alarm Mains Isolator Keyswitch - Red Surface Includes Back Box

C-Tec BF326RS Fire Alarm Mains Isolator Keyswitch - Red Surface Includes Back BoxThe Fire Alarm Mains Isolator Keyswitch allows the mains toa fire alarm control panel to be switched on or off as per the requirements ofBS5839-1.Key FeaturesDouble poleFitted with 5A FuseSupplied with a special key that is only available to theresponsible personAble to be wired with 1 x 2.5mm2 cable or 2 x 1.5mm2 cableto ensure only independent sole main supplies are used to the fire panel as perBS5839-1 requirementsCan be labelled for use with an Evacuation Alert orEmergency Voice Communication System EVCS using a BF326LABELSurface mount - includes back box

GBP 16.55
1

C-Tec BF326WF Fire Alarm Mains Isolator Keyswitch White Flush

C-Tec BF326WF Fire Alarm Mains Isolator Keyswitch White Flush

C-Tec BF326WF Fire Alarm Mains Isolator Keyswitch White FlushC-TEC Fire Alarm Mains Isolator Keyswitch allows the mainsto a fire alarm control panel to be switched on or off as per the requirementsof BS5839-1.Key FeaturesAvailable in red or white with or without an LED Indicatorsurface or flushDouble poleFitted with 5A FuseSupplied with a special key that is only available to theresponsible personAble to be wired with 1 x 2.5mm2 cable or 2 x 1.5mm2 cableto ensure only independent sole main supplies are used to the fire panel as perBS5839-1 requirementsCan be labelled for use with an Evacuation Alertor Emergency Voice Communication System EVCS using a BF326LABEL

GBP 15.05
1

C-Tec BF326RSL Fire Alarm Mains Isolator Keyswitch - Red LED Surface Includes Back Box

C-Tec BF326RSL Fire Alarm Mains Isolator Keyswitch - Red LED Surface Includes Back Box

C-Tec BF326RSL Fire Alarm Mains Isolator Keyswitch - Red LED Surface Includes Back BoxThe Fire Alarm Mains Isolator Keyswitch allows the mains toa fire alarm control panel to be switched on or off as per the requirements ofBS5839-1.Key FeaturesDouble poleFitted with 5A FuseSupplied with a special key that is only available to theresponsible personAble to be wired with 1 x 2.5mm2 cable or 2 x 1.5mm2 cableto ensure only independent sole main supplies are used to the fire panel as perBS5839-1 requirementsCan be labelled for use with an Evacuation Alert orEmergency Voice Communication System EVCS using a BF326LABELSurface mount - includes back boxIncludes LED

GBP 17.46
1

C-Tec BF326WSL Fire Alarm Mains Isolator Keyswitch White LED Surface Includes Back Box

C-Tec BF326WSL Fire Alarm Mains Isolator Keyswitch White LED Surface Includes Back Box

C-Tec BF326WSL Fire Alarm Mains Isolator Keyswitch White LED Surface Includes Back BoxC-TEC Fire Alarm Mains Isolator Keyswitch with LED allows the mains to a fire alarm control panel to be switched on or off as per the requirements of BS5839-1.Key FeaturesAvailable in red or white with or without an LED Indicatorsurface or flushDouble poleFitted with 5A FuseSupplied with a special key that is only available to theresponsible personAble to be wired with 1 x 2.5mm2 cable or 2 x 1.5mm2 cableto ensure only independent sole main supplies are used to the fire panel as perBS5839-1 requirementsCan be labelled for use with an Evacuation Alertor Emergency Voice Communication System EVCS using a BF326LABEL

GBP 17.46
1

Klaxon Sonos White Sounder 9-60V DC Head Only TimeSaver PSS-0089

Klaxon Sonos White Sounder 9-60V DC Head Only TimeSaver PSS-0089

Klaxon Sonos White Sounder 9-60V DC Head Only TimeSaver PSS-0089With the TimeSaver base connections are made to the base during the initial wiring phase which results in faster and more reliable installation. The sounder head twists and clicks into the base on commissioning avoiding the wiring and connection problems associated with traditional sounders.With a choice of 32 tones including all the major international standards the Sonos Sounder Beacon has universal acceptance.Key FeaturesLow current LED beaconSimple First Fix installationWeatherproof to IP65 deep base unitsChoice of lens coloursTone and volume can be pre-set or adjusted off-base - 20dBPlease note This is the head only PSS-0089. For the full product please see PSS-0050.

GBP 17.27
1

C-Tec BF326WS Fire Alarm Mains Isolator Keyswitch White Surface Includes Back Box

C-Tec BF326WS Fire Alarm Mains Isolator Keyswitch White Surface Includes Back Box

C-Tec BF326WS Fire Alarm Mains Isolator Keyswitch White Surface Includes Back BoxC-TEC Fire Alarm Mains Isolator Keyswitch allows the mainsto a fire alarm control panel to be switched on or off as per the requirementsof BS5839-1.Key FeaturesAvailable in red or white with or without an LED Indicatorsurface or flushDouble poleFitted with 5A FuseSupplied with a special key that is only available to theresponsible personAble to be wired with 1 x 2.5mm2 cable or 2 x 1.5mm2 cableto ensure only independent sole main supplies are used to the fire panel as perBS5839-1 requirementsCan be labelled for use with an Evacuation Alertor Emergency Voice Communication System EVCS using a BF326LABEL

GBP 16.55
1

Klaxon Sonos Red Sounder 9-60V DC Head Only TimeSaver PSS-0084

Klaxon Sonos Red Sounder 9-60V DC Head Only TimeSaver PSS-0084

Klaxon Sonos Red Sounder 9-60V DC Head Only TimeSaver PSO-0084This product is a general-purpose electronic sounder. Features the TimeSaver base where connections are made to the base during the initial wiring phase which results in faster and more reliable installation. The sounder head twists and clicks into the base on commissioning avoiding the wiring and connection problems associated with traditional sounders.Sonos Sounder units are available in either red or white and with a choice of deep or shallow TimeSaver bases.Key FeaturesWide voltage rangeSimple First Fix installation2 alarm stages32 tonesTone and volume can be pre-set or adjusted off-baseWeather-proof to IP65 deep base unitsSynchronised alarm tonesVolume control - Typical 8dBPlease note This is the Head Only PSS-0084 comes without base. For full product please see PSS-0020.

GBP 17.27
1

Klaxon PSS-0003 Sonos Sounder Only with Red Body - Shallow Base 9-60v DC - 18-980450

Klaxon PSS-0003 Sonos Sounder Only with Red Body - Shallow Base 9-60v DC - 18-980450

Klaxon PSS-0003 Sonos Sounder Only with Red Body - Shallow Base 9-60v DC - 18-980450This product is a general purpose electronic sounder. Features the TimeSaver base where connections are made to the base during the initial wiring phase which results in faster and more reliable installation. The sounder head twists and clicks into the base on commissioning avoiding the wiring and connection problems associated with traditional sounders. Deep base units have weather-proof protection to IP65 and can be used in all locations both indoors and outdoors.Sonos Sounder units are available in either red or white and with a choice of deep or shallow TimeSaver bases.Key FeaturesWide voltage rangeSimple First Fix installation2 alarm stages32 tonesTone and volume can be pre-set or adjusted off-baseWeather-proof to IP65 deep base unitsSynchronised alarm tonesVolume control - Typical 8dB

GBP 16.99
1

Klaxon Sonos Sounder Only White Body Shallow Base 9-60v DC - PSS-0039 18-980475

Klaxon Sonos Sounder Only White Body Shallow Base 9-60v DC - PSS-0039 18-980475

Klaxon Sonos Sounder Only White Body Shallow Base 9-60v DC - PSS-0039 18-980475This product is a general purpose electronic sounder. Features the TimeSaver base where connections are made to the base during the initial wiring phase which results in faster and more reliable installation. The sounder head twists and clicks into the base on commissioning avoiding the wiring and connection problems associated with traditional sounders. Deep base units have weather-proof protection to IP65 and can be used in all locations both indoors and outdoors. Sonos Sounder units are available in either red or white and with a choice of deep or shallow TimeSaver bases.Key FeaturesWide voltage rangeSimple First Fix installation2 alarm stages32 tonesTone and volume can be pre-set or adjusted off-baseWeather-proof to IP65 deep base unitsSynchronised alarm tonesVolume control - Typical 8dB

GBP 16.99
1

Elmdene FOM-4 4 Way Fused Output Module - Mounted On Sticky Pad Feet

Elmdene FOM-4 4 Way Fused Output Module - Mounted On Sticky Pad Feet

Elmdene FOM-4 4 Way Fused Output Module - Mounted On Sticky Pad FeetElmdenes new Fused Output Modules FOMs are available in three standard variants. FOM4 4 x 1A FOM8 8 x 500mA and the DIN rail mountable FOM8-DIN 8 x 1A.Particularly useful in CCTV applications it gives the installer the provision of up to 8 independently fused outputs extremely useful when powering multiple devices.Each output possesses its own health status LED indication which provides quick identification of any blown fuses. The DIN rail version also offers an onboard switch enabling the user to turn off the outputs allowing for safe installation and maintenance activities to be conducted.The FOM4 and FOM8 are provided with self-adhesive mounts while the DIN rail mountable version has the option to be either DIN rail or screw mounted. These devices are ideal for modular applications such as rack installations or for use within existing PSU enclosures.Key Features4 or 8 individually fused outputsFuse health LED indicationPTC Fuse versions availableSwitchable supply inputAdhesive mounts providedFlexible low-cost solution

GBP 14.15
1

Nittan EVC-P Photoelectrical Optical Smoke Detector

Nittan EVC-P Photoelectrical Optical Smoke Detector

Nittan EVC-P Photoelectrical Optical Smoke Detector with 375 Ohm ResistorUsing a simple but effective technique the EVC-P Optical Detector incorporates a chamber housing an Infra-Red IR LED light and a photodiode light detector set at an obtuse angle preventing it from seeing the light. When smoke enters the chamber the light bounces off the smoke particles and strikes the photodiode causing it to generate an alarm condition when a set threshold value is met.The EVC-P Optical Detector is therefore more sensitive to larger smoke particles which tend to be caused by smouldering fires rather than fast flaming fires.OperationThe smoke chamber of the EVC-P is constructed so that light cannot enter from outside but smoke can pass through the chamber slots. The EVC-P utilises the light scatter sensing principle. The LED pulses every 8 seconds to maintain a low monitoring current. A quick charge time 20 seconds is also achieved. The detector incorporates an alarm verification function which requires two successive pulses before an alarm is given.The interval between the first and second pulse is automatically reduced to four seconds after the first alarm level is monitored. The detector design provides strong immunity to air velocities contamination and RF interference. The geometry of the smoke chamber and optics support assembly is designed to give the best possible signal to noise ratio resulting in excellent response characteristics.Key FeaturesOmniview 360 LEDInternal Alarm Current Limiting ResistorWide Operational Voltage Range 12v-32vOptical Detector

GBP 15.60
1

Carrier 5150-W 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm Output

Carrier 5150-W 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm Output

Carrier 5150-W 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm OutputThe Sentrol 5150 series glass break detector has been designed using the latest electronic techniques. This enables the detector to contain all the necessary circuitry for excellent detection whilst filtering out and rejecting all unwanted signals that would normally result in a nuisance alarms e.g. ultra-sound radio frequency interference etc. The 5150 series will provide a 3 m radius of protection. Suitable for use on standard window glass plate wired tempered and laminated glass.Due to the design of the product the detector may be fitted as close as 2.5 cm from the window frame and still provide a full 3 m radius. The 5150 series detectors are passive sensors therefore any number of detectors may be installed on the same windowpane without the risk of interaction. The detectors use a fail-safe normally closed open to alarm relay contact enabling compatibility with any standard burglar alarm control equipment.The output from the relay contact should be connected via the alarm 24-hour tamper loop in order to provide early signalling at the control whether the alarm is switched on or off. The opening of the normally closed relay contact signals the alarm.Easily installs with pre-cut specially formulated 3M adhesive tape.Key Features3 m radius of coverage measured from the sensorProtects all glass types up to a standard thickness of 6.4 mm includingplate wired tempered and laminated glassIdeal for 24-hours loop protectionTwo wire sensor drawing no power from the loopCompatible with most wireless transmitters

GBP 12.82
1

Carrier 5150-M 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm Output

Carrier 5150-M 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm Output

Carrier 5150-M 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm OutputThe Sentrol 5150 series glass break detector has been designed using the latest electronic techniques. This enables the detector to contain all the necessary circuitry for excellent detection whilst filtering out and rejecting all unwanted signals that would normally result in a nuisance alarms e.g. ultra-sound radio frequency interference etc. The 5150 series will provide a 3 m radius of protection. Suitable for use on standard window glass plate wired tempered and laminated glass.Due to the design of the product the detector may be fitted as close as 2.5 cm from the window frame and still provide a full 3 m radius. The 5150 series detectors are passive sensors therefore any number of detectors may be installed on the same windowpane without the risk of interaction. The detectors use a fail-safe normally closed open to alarm relay contact enabling compatibility with any standard burglar alarm control equipment.The output from the relay contact should be connected via the alarm 24-hour tamper loop in order to provide early signalling at the control whether the alarm is switched on or off. The opening of the normally closed relay contact signals the alarm.Easily installs with pre-cut specially formulated 3M adhesive tape.Key Features3 m radius of coverage measured from the sensorProtects all glass types up to a standard thickness of 6.4 mm includingplate wired tempered and laminated glassIdeal for 24-hours loop protectionTwo wire sensor drawing no power from the loopCompatible with most wireless transmitters

GBP 13.24
1

Apollo Deckhead Mounting Box 45681-217APO

Apollo Deckhead Mounting Box 45681-217APO

Apollo Deckhead Mounting Box 45681-217APOMechanical ConstructionThe Deckhead Mounting Box is used on its own in most cases but there are applications where either an extension sleeve or an adaptor ring is required. The Extension Sleeve is required when fitting heater or deep bases the Adaptor Ring is needed for fitting sounder bases beacon bases or sound beacon bases. Further details are given in the table below. The Extension Sleeve and the Adaptor Ring are sold as an Accessory Kit part no 45681-218.The Deckhead Mounting Box has 6 cable access ports for M20 glands and is secured to the mounting surface via two 5.4mm holes in the webs.Additional InformationFor more information refer to Installation Guide 39214-450 and Datasheets PP2364 PP2040.Safety NoteNOTES ON USE 1. Do not apply any sealing compound or use a gasket of any kind between the detector base and deckhead mounting box 2. Ensure that if a terminal block is fitted it does not contact or foul the detector base 3. Ensure that the mounting surface is flat and Level 4. Seal unused cable access ports with suitable blanking plugs. Sealing compound may be used provided that it does not at any time give off fumes or vapour which could affect any detector fitted to the base 5. The deckhead mounting box orientation should be such that the detector LED is facing the entrance to the protected areaProduct InformationThe Deckhead Mounting Box part no 45681-217 is a device which protects bases sounder bases and sounder beacon bases from the ingress of water or other liquids. It is screwed to the soffit and accepts a variety of Apollo bases.Key FeaturesProtects against water ingressImproved performanceAvailable in polycarbonate or metalPolycarbonate deckhead mounting box 45681-217 also fits Apollo audio visual bases when used with the accessory kit 45681-218Additional Information 3Weight of DeckheadMounting Box Backbox 100gExtension sleeve 23gAdaptor Ring 29g

GBP 12.54
1