30 results (0,15103 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Aritech DC134 Surface Mount Contact Screw Terminals - Wide Gap

Aritech DC134 Surface Mount Contact Screw Terminals - Wide Gap

Aritech DC134 Surface Mount Contact Screw Terminals - Wide GapThe DC series range of high performance magnetic contacts have been designed to facilitate installation and ensure durability and dependability. Most are conservatively rated at 10000000 cycles guaranteeing a long life.Every reed connection is hand soldered and each magnetic contact is tested before they leave the factory 100 of the time.Key FeaturesComprehensive product rangeSuperior qualityEasy installationTamper loop provided

GBP 9.24
1

C-Tec BF430CCCSR ActiV Conventional Wall Sounder with Shallow Base

C-Tec BF430CCCSR ActiV Conventional Wall Sounder with Shallow Base

C-Tec BF430CCCSR ActiV Conventional Wall Sounder with Shallow BaseThe ActiV Hi-Output range of conventional sounders and combined sounder visual alarm devices VADs are designed for use with C-TECs range of fire panels and other compatible third-party panels. However compatibility testing with third-party panels is recommended to ensure correct operation. With a 100 dBA peak sound output 1 m their purpose is to visually and audibly alert building occupants of a fire alarm. Units are supplied with either a shallow or deep base in a red plastic enclosure.The devices offer low current consumption high sound output 31 selectable primary tones with selectable secondary tone set and two selectable volume levels. Tones and volume levels are changed using the devices 8-way DIP switch.Key FeaturesLPCB certified to EN54-3 SoundersImpressive 100dBA sound output 1m31 selectable primary andsecondary tone pairs and two volume levels high and lowAlarm Current at 30Vdc 5.5mAAlarm Current at 18Vdc 3.8mAIP21C ratedManufactured in the UK by C-TEC

GBP 16.73
1

Cranford Controls VBL-24AP Red 6 Inch 24V Bell

Cranford Controls VBL-24AP Red 6 Inch 24V Bell

Cranford Controls VBL-24AP Red 6 Inch 24v BellThe VBL 6 motorised bell has been designed to offer maximum performance combined with rapid installation and a sleek low profile appearance. The bell is used for a wide range of alerts including fire alarm. The unit comes complete with a tamper resistant hex bolt and for easy installation an allen key is provided with the product.Key FeaturesLow current consumptionAvailable in red and greyLow profile designTamper resistant gong cover boltGrey Bell Non-EN 54-3 Approved

GBP 16.86
1

Fireclass 516.900.002FC 701PH Conventional Optical Heat Detector

Fireclass 516.900.002FC 701PH Conventional Optical Heat Detector

Fireclass 516.900.002FC 701PH Conventional Optical Heat DetectorThe Fireclass 701PH is a conventional optical smoke heat enhanced detector ideal for use with the Tyco FireClass range of conventional fire alarm control panels.The 701PH Optical and Heat Detector is suitable for normal ambient conditions where the high-performance optical detector behaves as a normal optical detector. Only when a rapid rise in temperature is detected does the sensitivity of the detector increase and the condition change. This is the first conventional detector from Johnson Controls to be certified to the EN54-29 standard for multi-sensors.The 700 Series Intelligent Conventional Fire Detection Range is the first conventional detector range from Johnson Controls that uses algorithms to determine fire conditions more precisely. This provides superior performance and improved false alarm rejection rates.Through innovative design the built-in micro-processors in the 700 Series detectors offer built-in drift compensation which extends the life of the detectors thereby reducing service costs to the customers. Installers only need one fitting to complete the installation.Key FeaturesDesigned for fast easy installationLow operational voltageAvailable as smoke fixed heat RoR heat and photo heatBackward compatibility with 600 seriesCompatible with 4B-D 4B and 5B basesLow profile and discreet designApproval to EN54 LPCB standardsImproved detection algorithmsBuilt-in drift compensationEN54 approval

GBP 11.09
1

Carrier 3012-N Recessed Clip Mount Plunger Tamper Contact NC With 30cm Wire Leads

Carrier 3012-N Recessed Clip Mount Plunger Tamper Contact NC With 30cm Wire Leads

Carrier 3012-N Recessed Clip Mount Plunger Tamper Contact NC With 30cm Wire LeadsSentrol offers the 3010 series pin plunger for tamper protection. The contact is hermetically sealed and reed actuated for positive operation on seldom-used enclosure openings.Durability and dependabilityThe Sentrol high performance magnetic contacts have been designed to facilitate installation and ensure durability and dependability. Most are conservatively rated at 10000000 cycles guaranteeing a long life. Every reed connection is hand soldered and each magnetic contact is tested before they leave the factory 100 of the time.Key FeaturesAdjustable plunger depthIncluding sheet metal mounting screwsEasy installationOptional tamper loop provided

GBP 13.12
1

Yuasa 12V 1.2AH Battery NP1.2-12

Yuasa 12V 1.2AH Battery NP1.2-12

Yuasa 12V 1.2AH Battery NP1.2-12NP1.2-12 12V 1.2Ah Yuasa General Purpose VRLA BatteryCapacity Ah 20-HR 1.2Capacity at 20-hour Rate Ah 1.2Cold Cranking Performance Amps EN1 NAThe Yuasa NP Series batteries set the standard for quality and excellence in the field of rechargeable batteries. These high-quality batteries ensure that no electrolyte leakages occur from the case or terminals. The NP series range is almost maintenance-free with the perfectly sealed construction and the recombination of gases within the cell.The NP series offers a unique electrolyte suspension system incorporating a microfine glass mat AGM to retain the maximum amount of electrolyte in the cells. The valve regulated design of this battery is equipped with a safe low-pressure venting system which releases excess gases and automatically reseals should there be a build-up of gas within the battery due to overcharging.Key FeaturesEUROBAT Classification 3 to 5 years Standard CommercialGeneral purpose VRLA batteryLead Calcium Grids for superior lifeAbsorbed Glass Mat construction with no free acidGas recombinationManufactured world wideGood recovery from deep dischargeOperation in any orientation excluding continuous inverted useTechnical Specification Voltage 12VCapacity at 20-hour Rate Ah 1.2Cold Cranking Performance Amps EN1 NACell Layout 3Terminal ARecommended Charge Rate Amps 0.1Capacity Ah 20-HR 1.2Length mm 97Width mm 48Height mm 54.5Total Height mm 54.5Weight kg 0.58Nominal Voltage 12Capacity Ah 1.2

GBP 12.48
1

Vesda Xtralis 128-015 Smoke Detector Pipe Label - Pack of 100

Vesda Xtralis 128-015 Smoke Detector Pipe Label - Pack of 100

Vesda Xtralis 128-015 Label - Smoke Detector Pipe- Pack of 100Suction detector pipe label for marking the pipe system.Our range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you the quality you are used to as a VESDA customer.The pipes are a metric standard of 25 mm external diameter with suitable adapters available for imperial to metric conversions and are designed for use with any make of low pressure aspirating type smoke detection system.

GBP 14.40
1

Vesda Xtralis 059-007 Conical Sampling Point Kit

Vesda Xtralis 059-007 Conical Sampling Point Kit

Vesda Xtralis 059-007 Conical Sampling Point KitThe Vesda25mm Capillary Sampling Point -Conical 059-007set has a tempered sampling tip installed at its end. The set includes capillary tube adapter capillary tube 2m long and 10mm in diameter and a flat sampling tip.Kit Includes2m of 10mm OD tubeTrunk AdaptorPoint and decalWith over 250000 aspirating smoke detectors installed worldwide the VESDA name has become synonymous with high quality and outstanding performance. An aspirating smoke detection system however only performs at its best with a well designed and installed quality pipework system. Xtralis manufacturer of VESDA detectors recognised this requirement and in 1997 launched its VESDA Pipe and Fittings range.Please note The 059-007 is equivalent to the redCSK.

GBP 17.23
1

Vesda Xtralis 128-014-XTR Label Sampling Point Roll of 100

Vesda Xtralis 128-014-XTR Label Sampling Point Roll of 100

Vesda Xtralis 128-014 Label Sampling Point Roll of 100Round sampling point label 100 pieces on roll which are used to clearly mark where sampling points are in aspiration pipework.The range of Pipe and Fittings products have been specially developed to provide fully matched components for the optimal performance of your whole VESDA aspirating system.The pipes are a metric standard of 25 mm external diameter with suitable adapters available for imperial to metric conversions and are designed for use with any make of low-pressure aspirating type smoke detection system.They are also manufactured to comply with the requirements of BS5391 Part 1 EN 61386-1 and the new EN54 Part 20 guaranteeing you the quality you are used to as a VESDA customer.

GBP 11.00
1

Carrier N-MC-AFM-G Manual Call Point Recess Mount Accessory

Carrier N-MC-AFM-G Manual Call Point Recess Mount Accessory

Carrier N-MC-AFM-G Manual Call Point Recess Mount AccessoryThe innovative range of enhanced intelligent devices offer advanced features for reliability and peace of mind. Coupled with patented features for ease of installation and maintenance of both new and legacy fire detection systems its a perfect match for exceptional overall performance. The N-MC-AFM-G manual call point recess mount accessory allows for mounting the ActivSense series manual call points on an embedded wall box. Recess mounting reduces the overall protruding height of the manual call point substantially thereby improving the aesthetics of the device when fitted to the wall.Key FeaturesAllows for easy manual call point recess mounting reducing the height of the manual call point on the wallVarious fitment options allow for installation on most high quality European wall boxes

GBP 11.64
1

Carrier N-MC-AFM-R Manual Call Point Recess Mount Accessory

Carrier N-MC-AFM-R Manual Call Point Recess Mount Accessory

Carrier N-MC-AFM-R Manual Call Point Recess Mount AccessoryThe innovative range of enhanced intelligent devices offer advanced features for reliability and peace of mind. Coupled with patented features for ease of installation and maintenance of both new and legacy fire detection systems its a perfect match for exceptional overall performance. The N-MC-AFM-G manual call point recess mount accessory allows for mounting the ActivSense series manual call points on an embedded wall box. Recess mounting reduces the overall protruding height of the manual call point substantially thereby improving the aesthetics of the device when fitted to the wall.Key FeaturesAllows for easy manual call point recess mounting reducing the height of the manual call point on the wallVarious fitment options allow for installation on most high quality European wall boxes

GBP 13.45
1

Zeta ZT-CP4FB Abort Call Point Flush Mount cw Bezel

Zeta ZT-CP4FB Abort Call Point Flush Mount cw Bezel

Zeta ZT-CP4FB Abort Call Point Flush Mount cw BezelThe ZT-CP4 is a resettable manual call point with unique and innovative features. It has been designed to obtain maximum visibility high reliability in operation and pleasant aesthetical appearance.When the resettable element is pressed the spring mechanism mimics the feel of a break glass and the resettable element goes back.A completely new action system gives high performance and guarantees the alarm detection in every condition.A reflective polyester flag appears in the bottom of the operating face providing the highest levels of visibility for the user. At the heart of the call point a spring free mechanism is used to operate the flag and the switch via a patented design. This allows long life and trouble free operation.Key FeaturesAbort call pointFlush mountComes with bezel

GBP 15.12
1

Fireclass 516.900.004FC 702H Conventional Fixed Temp Heat Detector - 60C EN

Fireclass 516.900.004FC 702H Conventional Fixed Temp Heat Detector - 60C EN

Fireclass 516.900.004FC 702H Conventional Fixed Temp Heat Detector - 60C ENThe Fireclass 702H is a conventional fixed temperature detector ideal for use with the Fireclass range of conventional fire alarm control panels.The 700 Series Intelligent Conventional Fire Detection Range is the first conventional detector range from Johnson Controls that uses algorithms to determine fire conditions more precisely. This provides superior performance and improved false alarm rejection rates.Through innovative design the built-in micro-processors in the 700 Series detectors offer built-in drift compensation which extends the life of the detectors thereby reducing service costs to the customers. Installers only need one fitting to complete the installation.Key FeaturesDesigned for fast easy installationLow operational voltageBackward compatibility with 600 seriesCompatible with 4B-D 4B and 5B basesLow profile and discreet designApproval to EN54 LPCB standardsImproved detection algorithmsBuilt-in drift compensationMicroprocessor based threshold compensationImproved detection algorithmsEN54 approval

GBP 9.47
1

Fireclass 516.900.005FC 703H Conventional Fixed Temp Heat Detector - 90C EN

Fireclass 516.900.005FC 703H Conventional Fixed Temp Heat Detector - 90C EN

Fireclass 516.900.005FC 703H Conventional Fixed Temp Heat Detector - 90C ENThe Fireclass 703H is a conventional fixed temperature detector ideal for use with the Fireclass range of conventional fire alarm control panels.The 700 Series Intelligent Conventional Fire Detection Range is the first conventional detector range from Johnson Controls that uses algorithms to determine fire conditions more precisely. This provides superior performance and improved false alarm rejection rates.Through innovative design the built-in micro-processors in the 700 Series detectors offer built-in drift compensation which extends the life of the detectors thereby reducing service costs to the customers. Installers only need one fitting to complete the installation.Key FeaturesDesigned for fast easy installationLow operational voltageBackward compatibility with 600 seriesCompatible with 4B-D 4B and 5B basesLow profile and discreet designApproval to EN54 LPCB standardsImproved detection algorithmsBuilt-in drift compensationMicroprocessor based threshold compensationImproved detection algorithmsEN54 approval

GBP 9.65
1

Fireclass 516.900.003FC 701H Conventional Rate of Rise Heat Detector - 60C EN

Fireclass 516.900.003FC 701H Conventional Rate of Rise Heat Detector - 60C EN

Fireclass 516.900.003FC 701H Conventional Rate of Rise Heat Detector - 60C ENThe Fireclass 701H is a conventional rate of rise heat detector ideal for use with the Fireclass range of conventional fire alarm control panels.The 700 Series Intelligent Conventional Fire Detection Range is the first conventional detector range from Johnson Controls that uses algorithms to determine fire conditions more precisely. This provides superior performance and improved false alarm rejection rates.Through innovative design the built-in micro-processors in the 700 Series detectors offer built-in drift compensation which extends the life of the detectors thereby reducing service costs to the customers. Installers only need one fitting to complete the installation.Key FeaturesDesigned for fast easy installationLow operational voltageBackward compatibility with 600 seriesCompatible with 4B-D 4B and 5B basesLow profile and discreet designApproval to EN54 LPCB standardsImproved detection algorithmsBuilt-in drift compensationMicroprocessor based threshold compensationImproved detection algorithmsEN54 approval

GBP 9.32
1

Elmdene VRS121000EB 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded UK Plug

Elmdene VRS121000EB 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded UK Plug

Elmdene VRS121000EB 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded UK PlugElmdenes Vision 12V encapsulated power supplies have been designed specifically for CCTV applications.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection. They also have high efficiency switch mode operation which means lower running temperature and lower running costs.The encapsulated devices all have a neat compact design and come fitted with a UK plug.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesFully regulated 12V dc outputHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionUniversal 100 240V ac mains supplyCompact sizeUK Plug2.1mm dc output jack socket on flying lead3 year warrantyEncapsulated in plastic caseIdeal for CCTVSize 64x45x25

GBP 10.86
1

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European Plug

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European Plug

Elmdene VRS121000EE 12V d.c. Switch Mode PSU - 1Amp - Mains Moulded European PlugElmdenes Vision 12V encapsulated power supplies have been designed specifically for CCTV applications.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection. They also have high efficiency switch mode operation which means lower running temperature and lower running costs.The encapsulated devices all have a neat compact design and come fitted with a European plug EE.Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesFully regulated 12V dc outputHigh efficiency switch mode operationFull rated current to loadElectronic short circuit protectionUniversal 100 240V ac mains supplyCompact sizeFitted with European plug2.1mm dc output jack socket on flying lead3 year warrantyEncapsulated in plastic caseIdeal for CCTVSize 64x45x25

GBP 10.86
1

Patol 700-005LS0H FRPE Red Analogue Resettable LHDC Chemical amp UV Resistant - Stainless Steel Braid

Patol 700-005LS0H FRPE Red Analogue Resettable LHDC Chemical amp UV Resistant - Stainless Steel Braid

Patol 700-005LS0H FRPE Red Analogue Resettable LHDC Chemical UV Resistant - Stainless Steel BraidAFRPE Red Analogue Resettable LHDC Chemical UV Resistant with stainless steel braid. For use with the Resettable Analogue LHDC 1m Portable Test Oven.Commissioning and routine maintenance testing of the Patol Resettable Analogue Linear Heat Detection Cable systems can be conducted at site by the use of a calibrated One Metre Test Oven.The portable One Metre Test Oven concept of testing allows accessible one metre installed lengths of sensor cable to be subjected to temperatures within the Alarm range. Thus confirming correct calibration setting selection and Alarm levels in accordance with project specification requirements.Where sensor cable is installed within hazardous classified areas or may be inaccessible for oven use an additional one metre length may be series wired with existing cable sensor and or interconnecting cables to allow testing to be carried out local to the electronic interface unit in the safe area. Without adversely affecting system performance levels.

GBP 10.58
1

Elmdene VRS122000EE 12V d.c. Switch Mode PSU 2Amp. Encapsulated In Plastic Case

Elmdene VRS122000EE 12V d.c. Switch Mode PSU 2Amp. Encapsulated In Plastic Case

Elmdene VRS122000EE 12V d.c. Switch Mode PSU 2Amp. Encapsulated In Plastic CaseElmdenes Vision 12V dc encapsulated power supplies have been designed specifically for CCTV applications. The range comprises of 1A 2A 3.5A and 5A models.The units feature a universal mains input voltage range from 100 to 240V ac and includes electronic short circuit protection and mains status indication 3.5A and 5A models only. They also use high efficiency switch mode operation which means lower running temperature and lower running costs.The units have a neat and compact design and come fitted with either a UK or Euro mains plug. The 2A 3.5A and 5A versions are available with a 4-way 2.1mm dc output splitter as an option. Elmdenes Vision range feature highly stable closely regulated 12V dc outputs at full rated current to load. The products are designed to provide reliability and performance with low maintenance and operational costs.Key FeaturesIdeal for CCTVOutput flying lead fitted with 2.1mm jack connectorMains - moulded European PlugSize 78x52x25

GBP 15.26
1

Carrier 1087T-N Surface Mount Contact 19mm Gap SPDT CO Screw Terminal White

Carrier 1087T-N Surface Mount Contact 19mm Gap SPDT CO Screw Terminal White

Carrier 1087T-N Surface Mount Contact 19mm Gap SPDT CO Screw Terminal WhiteSentrol 1085T series is ideal for residential and commercial applications where terminal connections are preferred. The unit features positive clamping terminals with anti-rotation lugs and captured screws with combination heads. These features allow for easy quick installations.Comprehensive RangeThe range includes wide gap SPDT and biased version for higher security. This makes it one of the most popular contacts available in the industry today.Durability and dependabilityThe Sentrol high performance magnetic contacts have been designed to facilitate installation and ensure durability and dependability. Most are conservatively rated at 10000000 cycles guaranteeing a long life.Every reed connection is hand soldered and each magnetic contact is tested before they leave the factory 100 of the time.High quality components and materialsReed legs are plated with rhodium or ruthenium and hermetically sealed in dry nitrogen. This offers superior protection against sticking and provides a moisture free environment therefore preventing corrosion.Key FeaturesEasy clamping terminal speed installationCover spacer includedIdeal for residential and commercialConvenient surface mountingVersions with built-in 3K3 resistors available

GBP 10.37
1

Fireclass 516.900.001FC 701P Conventional Optical Detector

Fireclass 516.900.001FC 701P Conventional Optical Detector

Fireclass 516.900.001FC 701P Conventional Optical DetectorThe 701P is a conventional optical smoke detector ideal for use with the Tyco FireClass range of conventional fire alarm control panels.The 701P Smoke Detector operates by sensing the optical scatter from smoke particles generated in a fire. These detectors are suitable for general applications and areas where cable overheating may occur for example in electrical services areas.The 700 Series Intelligent Conventional Fire Detection Range is the first conventional detector range from Johnson Controls that uses algorithms to determine fire conditions more precisely. This provides superior performance and improved false alarm rejection rates.Through innovative design the built-in micro-processors in the 700 Series detectors offer built-in drift compensation which extends the life of the detectors thereby reducing service costs to the customers. Installers only need one fitting to complete the installation.The 701PH Detector has EN54-29 approval.Key FeaturesDesigned for fast easy installationLow operational voltageAvailable as smoke fixed heat RoR heat and photo heatBackward compatibility with 600 seriesCompatible with 4B-D 4B and 5B basesLow profile and discreet designApproval to EN54 LPCB standardsImproved detection algorithmsBuilt-in drift compensationEN54 approval

GBP 10.27
1

C-Tec C4403A1R ActiV Class A1R Rate of Rise Heat Detector

C-Tec C4403A1R ActiV Class A1R Rate of Rise Heat Detector

C-Tec ActiV Class A1R Rate of Rise Heat Detector - C4403A1RThe C4403A1R class A1R rate-of-rise heat detector generates an alarm condition when it detects a sudden rise in temperature or if it detects a static temperature of between 54C and 65C. Heat detectors are typically used in environments where smoke detectors cannot be installed for example in areas susceptible to fumes airborne materials and smoke such as in kitchens loading bays workshops wood mills and nightclubs.Other detectors from the ActiV range include C4403A2 which is a 60C Fixed Heat Detector C4403B which is a 75C Fixed Heat Detector C4414 which is a Heat Smoke Multi-Sensor and the C4416 which is a Optical Smoke Detector.Key FeaturesA high-quality rate-of-rise heat detector offering outstanding detection performance at a very competitive priceManufactured by C-TEC in the UKThird-party certified to EN54-5 by IntertekCarries the pan-European CertAlarm markWide 6-33V DC operating voltageTwo 8mm x 2mm ultra-bright red LED indicating strips offering 360 visibilitySophisticated onboard detection algorithms help reduce false alarms by rejecting momentary abnormal readingsCompatible with our ActiV C4408D diode C4408 non-diode and C4408R relay bases all bases include an integrated detectorbase locking mechanism and ID tagClass A2 fixed heat class B fixed heat optical and multi-sensor variants also availableExcellent discounts for quantity orders

GBP 13.15
1

C-Tec ActiV Class A2 Standard 60C Fixed Temperature Heat Detector - C4403A2

C-Tec ActiV Class A2 Standard 60C Fixed Temperature Heat Detector - C4403A2

C-Tec ActiV Class A2 Standard 60C Fixed Temperature Heat Detector - C4403A2The C4403A2 Class A2 fixed temperature heat detector generates an alarm condition if the temperature within the protected area reaches a temperature of between 54C and 65C. Heat detectors are typically used in environments where smoke detectors cannot be installed for example in areas susceptible to fumes airborne materials and smoke such as in kitchens loading bays workshops wood mills and nightclubs.Other detectors from the ActiV range include C4403A1R which is a Rate of Rise Heat Detector C4403B which is a 75C Fixed Heat Detector C4414 which is a Heat Smoke Multi-Sensor and the C4416 which is a Optical Smoke Detector.Key FeaturesA high-quality Class A2 fixed temperature heat detector offering outstanding detection performance at a very competitive priceManufactured by C-TEC in the UKThird-party certified to EN54-5 by IntertekCarries the pan-European CertAlarm markWide 6-33V DC operating voltageTwo 8mm x 2mm ultra-bright red LED indicating strips offering 360 visibilitySophisticated onboard detection algorithms help reduce false alarms by rejecting momentary abnormal readingsCompatible with our ActiV C4408D diode C4408 non-diode and C4408R relay bases all bases include an integrated detectorbase locking mechanism and ID tagClass B fixed heat class A1R rate-of-rise optical and multi-sensor variants also availableExcellent discounts for quantity orders

GBP 13.15
1

C-Tec C4403B ActiV Class B High 75C Fixed Temperature Heat Detector

C-Tec C4403B ActiV Class B High 75C Fixed Temperature Heat Detector

C-Tec ActiV Class B High 75C Fixed Temperature Heat Detector - C4403BThe C4403B Class B fixed temperature heat detector generates an alarm condition if the temperature within the protected area reaches a temperature of between 69C and 85C. Heat detectors are typically used in environments where smoke detectors cannot be installed for example in areas susceptible to fumes airborne materials and smoke such as in kitchens loading bays workshops wood mills and nightclubs.Other detectors from the ActiV range include C4403A1R which is a Rate of Rise Heat Detector C4403A2 which is a 60C Fixed Heat Detector C4414 which is a Heat Smoke Multi-Sensor and the C4416 which is a Optical Smoke DetectorKey FeaturesA high-quality Class B fixed temperature heat detector offering outstanding detection performance at a very competitive priceManufactured by C-TEC in the UKThird-party certified to EN54-5 by IntertekCarries the pan-European CertAlarm markWide 6-33V DC operating voltageTwo 8mm x 2mm ultra-bright red LED indicating strips offering 360 visibilitySophisticated onboard detection algorithms help reduce false alarms by rejecting momentary abnormal readingsCompatible with our ActiV C4408D diode C4408 non-diode and C4408R relay bases all bases include an integrated detectorbase locking mechanism and ID tagClass A1 fixed heat class A1R rate-of-rise optical and multi-sensor variants also available

GBP 13.15
1