the complete calvin and hobbes from GBP 9 | See the cheapest prices and offers on css.lazzaweb.dk

Morley M1A-R470SG-STCK-01 Surface Call Point with 470 Ohm Resistor and N.O. Contact

Morley M1A-R470SG-STCK-01 Surface Call Point with 470 Ohm Resistor and N.O. ContactA surface call point with 470 Ohm resistor and N.O. contact which comes complete with glass.Its simple modular design introduces plug-in terminations to the MCP series installation process. First fix installation permits all field wiring to be terminated to the plug whilst the fascia element and lid are kept out of harms way. To help the installer further a simple loop continuity device is included to aid checking of loop wiring before connection to the MCP and the fire alarm system. This new standard conventional break glass offers both clean and monitored contacts in the same housing.Key FeaturesPlug-in terminationsImproved aestheticsMonitored or clean contactsAnti-tamper featuresInterchangeable glass elementIntegrated designSurface call point

GBP 10.54

1

CO2 Hose and Horn - CDHH

CO2Hose and Horn - CDHHThe hose and horn assembly for 5kg CO2 fire extinguishers features an integrated handle for safe use during operation. This replacement part is easy to fit and suitable for use on most makes of 5kg CO2 fire extinguishers.Key FeaturesIntegrated handle allows safe holding during dischargeReduces the risk of freeze burn injuriesEasy to install and user friendlyFor use on the majority of 5kg CO2 fire extinguisher makes

GBP 11.09

1

Morley BRR Red Deep Base

Morley BRR Red Deep BaseThe BRR is a Morley deep sounder backbox ideal for use with the Audio-Visual range of sounders and beacons. The backbox comes complete with a B501AP base.

GBP 8.81

1

Zeta MKII-ISO Isolator Base and Cover

Zeta MKII-ISO Isolator Base and CoverThe MKII-ISO is an Isolator Base and Cover.There are 6 different detector bases available for the addressable range of detectors namely common base isolator base and addressable relay base.The Isolator base is used to protect the loop against short circuits. They should be used at least every 32 devices but it is better practice to use them at the end of every zone.

GBP 16.15

1

System Sensor BRR Red Deep Base

System Sensor BRR Red Deep BaseThe BRR is a System Sensor deep sounder backbox ideal for use with the Audio-Visual range of sounders and beacons. The backbox comes complete with a B501AP base.

GBP 8.81

1

Fireclass 2000682FC Lock and Barrel for Precept EN

Fireclass 2000682FC Lock and Barrel for Precept ENThe 2000682FC from Fireclass is a Lock and Barrel designed for the Precept EN Panels.

GBP 9.94

1

Ziton Flush Mount Call Point 560ohm with Glass and LED DMN700L

Please note This item is being phased out we have limited stockavailable.Ziton Flush Mount Call Point 560ohm with Glass and LED DMN700LInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.InstallationInstallation time and ultimately cost are of paramount importance. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Options and approvalsThrough new standards and legislation both break glass and re-settable operating elements may now be used. To provide the greatest flex-ability the new MCP range can be configured as either a break glass or re-settable unit by simply changing from one element to another. No other additional parts or alternative products are required.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standardKey FeaturesEnhanced aestheticsEasy to install plug and playSurface mount optionsProtection hinged cover with Anti-Tamper facilityBackward compatibleKey test facilityMay be used with glass or resettable elementEasy to replace glassHigh quality micro switchFully approved to the latest standards

GBP 12.97

1

Hochiki CSCAP Lockable Cap for CSB-E and CSBB-E

Hochiki CSCAP Lockable Cap for CSB-E and CSBB-EA Lockable Cap for use with the CSB-E and CSBB-E.

GBP 9.65

1

C-Tec FF380X EFP-1X Expansion Loom and Terminals

C-Tec FF380X EFP-1X Expansion Loom and TerminalsThe C-Tec FF380X is an Expansion Loom and Terminals for the C-Tec FF380-2 EFP1 Fire Alarm Control Panel.

GBP 15.19

1

Precept Enable and Access Key Black amp Silver Key Pack

Precept Enable and Access Key Black Silver Key PackIn the precept key pack you get a single silver key used for access a single black key for enable with the Control Equipment Fireclass Tyco system.

GBP 15.84

1

STI STI-CKS013 1224 VDC Cable And Grommet For Enviro Plate

STI STI-CKS013 1224 VDC Cable And Grommet For Enviro PlateA 1224 VDC cable and grommet for use with the STI Enviro Plate.

GBP 15.19

1

Gent M1A-R470SF-G017-01 Surface Manual Conventional Call Point 470 Ohms Re-settable Supplied with Back Box

Gent M1A-R470SF-G017-01 Surface Manual Conventional Call Point 470 Ohms Re-settable Supplied with Back BoxThe M1A-R470SF-G017-01 from Gents conventional range of Fire Alarm System equipment has been specifically designed to be used on modern Conventional Non-addressable fire alarm systems. It features an internal 470Ohm resistor and comes complete with a backbox for surface mounting.Key FeaturesConventional Non-addressable Gent Call PointSurface Mounted Comes complete with a backbox470Ohm versionComes in the colour Red

GBP 13.58

1

Carrier 5150-M 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm Output

Carrier 5150-M 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm OutputThe Sentrol 5150 series glass break detector has been designed using the latest electronic techniques. This enables the detector to contain all the necessary circuitry for excellent detection whilst filtering out and rejecting all unwanted signals that would normally result in a nuisance alarms e.g. ultra-sound radio frequency interference etc. The 5150 series will provide a 3 m radius of protection. Suitable for use on standard window glass plate wired tempered and laminated glass.Due to the design of the product the detector may be fitted as close as 2.5 cm from the window frame and still provide a full 3 m radius. The 5150 series detectors are passive sensors therefore any number of detectors may be installed on the same windowpane without the risk of interaction. The detectors use a fail-safe normally closed open to alarm relay contact enabling compatibility with any standard burglar alarm control equipment.The output from the relay contact should be connected via the alarm 24-hour tamper loop in order to provide early signalling at the control whether the alarm is switched on or off. The opening of the normally closed relay contact signals the alarm.Easily installs with pre-cut specially formulated 3M adhesive tape.Key Features3 m radius of coverage measured from the sensorProtects all glass types up to a standard thickness of 6.4 mm includingplate wired tempered and laminated glassIdeal for 24-hours loop protectionTwo wire sensor drawing no power from the loopCompatible with most wireless transmitters

GBP 13.24

1

Carrier 5150-W 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm Output

Carrier 5150-W 2-Wire On-The-Glass Piezo Sensor With 30 cm Wire Leads NC Alarm OutputThe Sentrol 5150 series glass break detector has been designed using the latest electronic techniques. This enables the detector to contain all the necessary circuitry for excellent detection whilst filtering out and rejecting all unwanted signals that would normally result in a nuisance alarms e.g. ultra-sound radio frequency interference etc. The 5150 series will provide a 3 m radius of protection. Suitable for use on standard window glass plate wired tempered and laminated glass.Due to the design of the product the detector may be fitted as close as 2.5 cm from the window frame and still provide a full 3 m radius. The 5150 series detectors are passive sensors therefore any number of detectors may be installed on the same windowpane without the risk of interaction. The detectors use a fail-safe normally closed open to alarm relay contact enabling compatibility with any standard burglar alarm control equipment.The output from the relay contact should be connected via the alarm 24-hour tamper loop in order to provide early signalling at the control whether the alarm is switched on or off. The opening of the normally closed relay contact signals the alarm.Easily installs with pre-cut specially formulated 3M adhesive tape.Key Features3 m radius of coverage measured from the sensorProtects all glass types up to a standard thickness of 6.4 mm includingplate wired tempered and laminated glassIdeal for 24-hours loop protectionTwo wire sensor drawing no power from the loopCompatible with most wireless transmitters

GBP 12.82

1

Vesda Xtralis Sample Point Kit Conical 059-001-W

Vesda Xtralis Sample Point Kit Conical 059-001-WThis sample point kit is for use with white ABS pipe fittings. It comes complete with an ABS plain adaptor ceiling flush point and nylon capillary tube.Key Features Tech SpecsMaterial ABS connection Nylon tubeColour WhiteOperating temperature range -40C to 70CEN54 testedPlease Note The 059-001-W is equivalent to the WHTFSK.

GBP 13.04

1

Cooper Fulleon LED Remote Indicator with Integral Buzzer and Red Lens 24v

Cooper Fulleon Remote Indicator with Integral Buzzer and Red Lens 24v -600112FUL-0000The versatility of this compact unit allows it to be used with the majority of detectors to provide convenient remote indication. This indicator has many uses in applications where aesthetics is a key consideration.Key FeaturesSlim-line designWide operating voltageLow currentIntegral buzzer optionUnobtrusive blends in with modern building designSuitable for a wide range of applicationsMaximises the number of units in a circuitIdeal when both and audible and visual indicator is required

GBP 11.70

1

RGL Electronics BKEX600ZL Adjustable Z And L Bracket For EXML600-GATE Maglock

RGL Electronics BKEX600ZL Adjustable Z And L Bracket For EXML600-GATE MaglockThe BKEX600ZL is an adjustable Z L bracket suitable for the EXML600-GATE maglock.

GBP 16.08

1

Rutland LL1317.MAS Euro Cylinder amp Turn

Rutland LL1317.MAS Euro Cylinder TurnSPRKA 5 pin semi-restricted euro cylinder and turn.Comes complete with 3 keys.Key FeaturesSize A 80mmSize B 40mmSize C 40mm

GBP 15.78

1

Rutland LL1312.MAS Euro Cylinder amp Turn

Rutland LL1312.MAS Euro Cylinder TurnSPRKA 5 pin semi-restricted euro cylinder and turn.Comes complete with 3 keys.Key FeaturesSize A 70mmSize B 35mmSize C 35mm

GBP 16.21

1

KAC MUS156 10x EN54-11 Break Glass For MCPs And WCPs

KAC MUS156 10x EN54-11 Break Glass For MCPs And WCPsThe MUS156 is a pack of 10 replacement break glasses designed for use with the KAC range of break glass units.Key FeaturesReplacement break glassesKAC range of break glass unitsPack of 10

GBP 9.36

1

Cranford Controls VBL-24AP Red 6 Inch 24V Bell

Cranford Controls VBL-24AP Red 6 Inch 24v BellThe VBL 6 motorised bell has been designed to offer maximum performance combined with rapid installation and a sleek low profile appearance. The bell is used for a wide range of alerts including fire alarm. The unit comes complete with a tamper resistant hex bolt and for easy installation an allen key is provided with the product.Key FeaturesLow current consumptionAvailable in red and greyLow profile designTamper resistant gong cover boltGrey Bell Non-EN 54-3 Approved

GBP 16.86

1

KAC M3A-Y000FG-K013-54 Yellow NONC Contact Model Flush Glass Indoor Manual Call Point Extinguishant Release Marking And Hinge Cover

KAC M3A-Y000FG-K013-54 Yellow NONC Contact Model Flush Glass Indoor Manual Call Point Extinguishant Release Marking And Hinge CoverInstallation efficiency flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.Installation time and ultimately cost are of paramount importance to any fire or security installer. The MCP range directly reflects this need by providing a unique plug and play concept designed specifically to reduce installation time. All new MCP products utilise a special terminal block where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple but effective with no re-termination required and no time wasted.Through new standards and legislation both break glass and resettable operating elements can now be used within a manual call point. To provide you with the greatest flex-ability the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm.Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard compliant markings only.The MCP3A product version is supplied with one normally open and one normally closed contact. Selecting either the Normally Open or Normally Closed contact is easily achieved by simply connecting the terminal block to the required connection in the back of the MCP3 Product. Single pole changeover switching can be achieved with the use of two terminal blocks.Key FeaturesUnique Plug Play installation conceptTotal Flex-Ability in the choice of operating elementAnti-Tamper facilityEnhanced aestheticsFully approved to the latest standards

GBP 16.90

1

RGL Electronics RAINSHIELD Showerproof Housing For Use With KP1000 KPX2000 and KPX1000

RGL Electronics RAINSHIELD Showerproof Housing For Use With KP1000 KPX2000 and KPX1000A showerproof housing designed for use with the KP1000 KPX1000 KPX2000 range.Key FeaturesHigh impact plasticBlack high gloss finishSurface mountedIncludes gasketFor use with KP1000 KPX1000 KPX2000

GBP 10.63

1

KAC M1A-R470SG-STCK-01 Red Surface Break Glass Indoor Manual Call Point House Flame 470 OHM

KAC M1A-R470SG-STCK-01 Red Surface Break Glass Indoor Manual Call Point House Flame 470 OHMThe M1A-R470SG-STCK-01 call Point is a surface mounted conventional call point ideal for use with the Notifier NFS2-8 Panel range.This unit comes complete with a surface mounting backbox and test key.Key Features470 OHMBreak glass

GBP 13.49

1

Solo 460 Heat Detector Tester Baffle for Fike Detectors 15-0239

Solo 460 Heat Detector Tester Baffle for Fike Detectors 15-0239Due to the uniquely shaped detector chambers on Fike detectors the manufacturers developed a baffle to aid testing. the baffle is designed for the Solo 460 heat detector tester head unit and changes the direction of the direct heat flow to ensure a complete and effective test when testing Fike detectors. The baffle is inserted at the top of the Solo 460 as illustrated in the picture above.Please note Baffle only for use with Fike Detectors please remove when testing other detectors allowing for the direct heat flow to return to its standard format.

GBP 11.76

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)