1.420 results (0,16898 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Vesda Xtralis In-Line Filter Red VSP-850-R

Vesda Xtralis In-Line Filter Red VSP-850-R

Vesda Xtralis In-Line Filter Red VSP-850-RThe Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.Unlike other in-line filtration solutions available on the market the Xtralis In-Line Filter provides superior performance in terms of improving detector longevity and reducing maintenance frequency. Having tapered inlet and outlet means the Xtralis In-Line Filter is easily fitted in line with the sampling pipe without the need for any additional pipe fittings hence reducing the cost of installation. Filter elements can be easily replaced without having to remove the filter from the pipe network hence simplifying maintenance. Its elegant design blends in seamlessly into the installation where up to four can be installed side-by-side on Xtralis multi-pipe installations.The arrows on the Xtralis In-Line Filter cover indicate the direction of airflow aiding ease of correct mounting. As the airflow enters the filter housing it impinges on the filter elements which are positioned at a certain angle within the filter housing. This arrangement maximizes the filter element surface area subjected to the airflow hence promoting a longer filter life.Key FeaturesSuitable for all Xtralis Aspirating Smoke DetectorsImproved detector longevity in applications with high levels of air-borne contaminationReduces maintenance intervals thus reducing total cost of ownershipRequires no additional pipe fittings thus reducing cost of installationImproved aestheticsVertical or horizontal mountingCompatible with metric 25mm OD and imperial 1 OD pipes eliminating the need for pipe adaptors

GBP 135.30
1

Vesda Xtralis VSP-850-G In-line Filter Grey

Vesda Xtralis VSP-850-G In-line Filter Grey

Vesda Xtralis VSP-850-G In-line Filter GreyThe Xtralis In-Line Filter provides Xtralis customers the ability to address a wide array of harsh environments with high levels of airborne contaminants in a simple and cost-effective manner.Unlike other in-line filtration solutions available on the market the Xtralis In-Line Filter provides superior performance in terms of improving detector longevity and reducing maintenance frequency. Having tapered inlet and outlet means the Xtralis In-Line Filter is easily fitted in line with the sampling pipe without the need for any additional pipe fittings hence reducing the cost of installation. Filter elements can be easily replaced without having to remove the filter from the pipe network hence simplifying maintenance. Its elegant design blends in seamlessly into the installation where up to four can be installed side-by-side on Xtralis multi-pipe installations.The arrows on the Xtralis In-Line Filter cover indicate the direction of airflow aiding ease of correct mounting. As the airflow enters the filter housing it impinges on the filter elements which are positioned at a certain angle within the filter housing. This arrangement maximizes the filter element surface area subjected to the airflow hence promoting a longer filter life.Key FeaturesSuitable for all Xtralis Aspirating Smoke DetectorsImproved detector longevity in applications with high levels of air-borne contaminationReduces maintenance intervals thus reducing total cost of ownershipRequires no additional pipe fittings thus reducing cost of installationImproved aestheticsVertical or horizontal mountingCompatible with metric 25mm OD and imperial 1 OD pipes eliminating the need for pipe adaptors

GBP 135.30
1

Advanced 20-DLVMX100-BX Dual Isolator In Mounting Box

Advanced 20-DLVMX100-BX Dual Isolator In Mounting Box

Advanced 20-DLVMX100-BX Dual Isolator In Mounting BoxThe dual boxed isolator module is designed to provide protection against short circuits and faults in flats and apartments. The unit operates with the EvacGo control panel to provide high rates of information exchange in combination with particular features that ensure fast and secure responses.Key FeaturesDesigned to operate with EvacGo control panelsPassive device does not need to be addressedIsolates the adjacent loop section where the short circuit occurredAll functions of devices situated on opposite loops section of the module are unaffectedRestores power to the isolated loop section when short circuit is removedDesigned to comply with the BS 8629 Code of Practice

GBP 107.58
1

Notifier Honeywell Multimode Fibre Optic Plug-in Module 583392.11

Notifier Honeywell Multimode Fibre Optic Plug-in Module 583392.11

Notifier Honeywell Multimode Fibre Optic Plug-in Module 583392.11Pluggable Fiber Optic module for the fiber optic switch 583394.11 in 1310 nm multimode. This provide a Fiber Optic cable length up to 2 km.Key FeaturesRoHS compliantCompliant with Fast Ethernet standardCompatible with SONETSDH applicationIndustry standard small form pluggable SFP packageDuplex LV connectorDifferential LVPECL inputs and outputsSingle power supply 3.3VTTL signal detect indicatorHot PluggableClass 1 laser product complies with EN 60825-1

GBP 132.16
1

Vimpex Fire-Cryer Plus FC3AW0D in White Deep Base

Vimpex Fire-Cryer Plus FC3AW0D in White Deep Base

Vimpex Fire-Cryer Plus FC3AW0D in White Deep BaseThe Fire-Cryer Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement for electronic sounders or bells to broadcast a clear message for any situation - evacuation chemical spills access message security or general information.The Fire-Cryer Plus is a wall mounted voice enhanced sounder alarm unit. This product is ideal for use on fire alarm systems.The Fire-Cryer comes in an attractive white colour which makes it ideal for areas where red sounder units are not suitable.This device comes supplied with an IP66 rated deep base which means that it is ideal for use in external locations or areas where high levels of moisture may be present in the environment.Key FeaturesSound output - 100 dBAOptional integral strobe - red lens with red LED or clear lens with dual white and amber LEDsLow current - average 20 mANo special wiring easily retro-fittedFully synchronised over multi-zonesDeep base version available to IP667 user-definable messages from a library of hundredsApproved to EN 54-3

GBP 94.19
1

Fireco 728-7133 Dorgard SmartSound Door Holder in Black

Fireco 728-7133 Dorgard SmartSound Door Holder in Black

Fireco 728-7133 Dorgard SmartSound Door Holder in BlackThe Dorgard SmartSound designed by Fireco is an innovative wireless fire door retainer device that allows you to hold open fire doors in a completely legal quick and simple way.When a fire alarm rings the Dorgard device recognises the sound then automatically releases the door thus allowing it to close and rapidly prevent the spread of the fire.The Dorgard SmartSound has all of the popular features of the standard Dorgard model but with the intelligent SmartSound noise filtering system.SmartSound BenefitsNew SmartSound technology not triggered by vacuum cleanersCan be fitted to any doorThree-year battery lifeThree-year warrantyNo programming just fit and forgetCarpet friendly leaves no marksInstalled in under five minutesSmartSound Key FeaturesWireless technology battery poweredFire doors can be held open at any angleResponds when alarm is activatedAs soon as alarm is activated the plunger is released and the door will closeWorks with heavy fire doors up to 160kg and 1600mm widthThree-year battery lifeThree-year manufacturers warrantyAnti-drag technology carpet friendlySmartSound audio filtering wont be triggered by background noiseSimple LED status lightsAvailable in black or white

GBP 128.81
1

Fireco 943-3945 Dorgard SmartSound Door Holder in White

Fireco 943-3945 Dorgard SmartSound Door Holder in White

Fireco Dorgard SmartSound Door Holder in WhiteDorgard SmartSound is a wireless solution for legally holding open fire doors automatically releasing them to close when a fire alarm sounds. SmartSound technology means the door units are not triggered by the noise of a vacuum cleaner.When a fire alarm rings the Dorgard device recognises the sound then automatically releases the door thus allowing it to close and rapidly prevent the spread of the fire.The Dorgard SmartSound has all of the popular features of the standard Dorgard model but with the intelligent SmartSound noise filtering system.SmartSound BenefitsNew SmartSound technology not triggered by vacuum cleanersCan be fitted to any doorThree-year battery lifeThree-year warrantyNo programming just fit and forgetCarpet friendly leaves no marksInstalled in under five minutesSmartSound Key FeaturesWireless technology battery poweredFire doors can be held open at any angleResponds when alarm is activatedAs soon as alarm is activated the plunger is released and the door will closeWorks with heavy fire doors up to 160kg and 1600mm widthThree-year battery lifeThree-year manufacturers warrantyAnti-drag technology carpet friendlySmartSound audio filtering wont be triggered by background noiseSimple LED status lightsAvailable in black or white

GBP 128.81
1

Hochiki Ekho EK-WL8-IN Hybrid Wireless Single Input Module

Hochiki Ekho EK-WL8-IN Hybrid Wireless Single Input Module

Hochiki Ekho EK-WL8-IN Hybrid Wireless Single Input ModuleThe EK-WL8-IN is a Single Channel Input Module providing a convenient and cost effective solution for monitoring third party equipment.The module is also controllable from the Fire Control Panel via the cause and effect programming and offers the same level of flexibility as a standard addressable module. An optional back box is available and can be bought separately.Key FeaturesApproved to EN54-18 and 25RED compliantMonitored InputBi-directional wireless communicationSelf-optimising wireless amplitude and frequencyTamper SwitchUp to 10 years battery life

GBP 131.70
1

Vimpex DHBFS24 Brass Door Holder in Flush Mount 200N 24Vdc

Vimpex DHBFS24 Brass Door Holder in Flush Mount 200N 24Vdc

Vimpex DHBFS24 Brass Door Holder in Flush Mount 200N 24VdcThese attractive door holders are ideal for prestigious installations which demand high spec. fittings. These units available in chrome stainless steel or brass-look finishes are supplied with release buttons and with matching keeper plates.These magnets fit directly to a standard single-gang electrical back box which enables the unit to be easily flush-mounted. If surface mounting is necessary then colour-matched kits can be used to conceal the surface mounted box. These are supplied with two 20mm entry holes and blanking plugs. Comes with switch.

GBP 116.28
1

Aritech ATS1210E 8 Zone Expander With Output Connector In Small Plastic Housing

Aritech ATS1210E 8 Zone Expander With Output Connector In Small Plastic Housing

Aritech ATS1210E 8 Zone Expander With Output Connector In Small Plastic HousingThe ATS1210E and ATS1211E expander offers 8 standard inputs and 8 Open Collector OC outputs. The expanders allow to increase the inputs and outputs of an Advisor Advanced control panel or CDC4 series doorlift controller. The ATS1210E is provided in a small plastic enclosure ATS1644 and the ATS1211E in a small metal enclosure ATS1643.Expanders are used to expand the number of alarm inputs in an Advisor Advanced system. Expanders allow inputs and outputsrelays to be connected at a location remote from an Advisor Advanced panel. Expanders communicate via poll reply messages. Detectors door contacts and other detection devices are connected to expanders that report any change of state to the control panel for processing. Available expanders include support for conventional devices wireless devices as well as intelligent addressable devices. A special expander is available providing expansion of four to eight intelligent doors or lifts.The system databus is used to connect expanders as well as keypads and readers RASs to the Advisor Advanced control panel. Remote devices can be up to 1.5 km from a control panels when using the preferred wiring and cable types. Keypads readers and expanders have to be connected via a 2 pair twisted and shielded data cable to the system databus connection to achieve this. WCAT52 is recommended. Daisy chain is the preferred wiring method. The shield of the data cable should be connected to earth at the control panel and should be left disconnected at any other end.Expanders provide information from remote locations to Advisor Advanced control panels in structured records. Data collected ranges from a wired input state to wireless or addressable device dates to a door state.Bus devices communicate with the control panel. If a failure in communication occurs the expander remembers the last alarm in a system preventing loss of an alarm due to a short interruption in data communication.Up to 15 or 30 expanders can be connected to an Advisor Advanced depending on the variant.

GBP 115.01
1

Vimpex Fire-Cryer Plus FC3AW0S in White Shallow Base

Vimpex Fire-Cryer Plus FC3AW0S in White Shallow Base

Vimpex Fire-Cryer Plus FC3AW0S in White Shallow BaseThe Fire-Cryer Plus requires no special wiring and can be retrofitted to existing installations. They are fully synchronised and have an exceptionally low current consumption. The units can be used as a replacement for electronic sounders or bells to broadcast a clear message for any situation - evacuation chemical spills access message security or general information.The Fire-Cryer Plus is a wall mounted voice enhanced sounder alarm unit. This product is ideal for use on fire alarm systems.The Fire-Cryer comes in an attractive white colour which makes it ideal for areas where red sounder units are not suitable.Key FeaturesSound output - 100 dBAOptional integral strobe - red lens with red LED or clear lens with dual white and amber LEDsLow current - average 20 mANo special wiring easily retro-fittedFully synchronised over multi-zonesDeep base version available to IP667 user-definable messages from a library of hundredsApproved to EN 54-3

GBP 94.19
1

Advanced ELRL240 Enclosed Hold-Off Relay with Built-In Delay

Advanced ELRL240 Enclosed Hold-Off Relay with Built-In Delay

Advanced ELRL240Enclosed Hold-Off Relay with Built-In DelayOn some installations it can sometimes be more advantageous to provide the emergency lighting from static inverter or central battery system. On systems using static inverters it is sometimes necessary for the normal supply and static inverter supply to be selected automatically by a switching device either within or external to the luminaire. The ELRL240 hold off relay provides a simple solution to this requirement. When a site uses a static inverter it is not always tied to the grid frequency and could even be antiphase with the normal supply. When a relay tries to switch between these supplies there is a tendency for the relay to suffer from arcing between the normally open and normally closed contacts resulting in temporary short circuit between the two out of phase supplies. This will cause external circuit protection to operate. Because the device uses two interposing relays for the two supplies and introduces a time delay of approximately 500mS between breaking the normal supply and connecting the static inverter supply the device removes any risk of arcing across contacts due to phase differences between the two supplies. This is also reversed when the static inverter supply is removed and a similar delay is introduced prior to reconnection to the normal lighting supply.A dimming isolation facility is incorporated as standard for use with dimming ballasts to enable full light output to be achieved in the emergency condition.Key FeaturesEnhanced change-over relay for static inverter supplied luminairesAutomatic time delay to avoid arcing during change-overBuilt in dimming isolation feature

GBP 89.94
1

Aritech ATS1136 Advisor Advanced Landscape Secure Mifare Keypad With Built In Card Reader

Aritech ATS1136 Advisor Advanced Landscape Secure Mifare Keypad With Built In Card Reader

Aritech ATS1136 Advisor Advanced Landscape Secure Mifare Keypad With Built In Card ReaderThe ATS1136 is the latest addition to the Advisor Advanced product family to provide a secure environment when using cards. Users can use cards instead or PIN codes or both to access functions of the control panel. The ATS1136 offers also easy end user operation quick arm functionality 2 levels of partset programmable function keys.Stylish designThe ATS1136 has a modern stylish design and has a clearly readable text on a large 2 x 16 characters LCD for displaying system programming alarm and access control functions. The contrast and intensity of the display and key lights are adjustable via the keypad as well as the volume level and tone of the built-in buzzer. Four arrow keys will navigate the user easily through the programming and operational features and 4 additional fixed functions keys will complete this user-friendly interface next to the 3 programmable function keys AB C.Built-in secure card readerThe ATS1136 has a built in Mifare Desfire EV1EV2 card reader. In secure mode card data is transferred securely from card to keypad and from keypad to Advisor Advanced control panel.The ATS1136 can be used for armingdisarming using either the PIN or the card or a combination of the two for higher security needs. It is suitable for using the multiple card badging techniques that are available for the Advisor Advanced product family. A user can set the system in the evenings by badging his card three times within 10 seconds interval. Another application could be for doors which can be programmed so that badging once unlocks the door to allow people in and out without card and badging three times re-locks the door.LED IndicationFour status LEDs will continuously update the user on mains condition faults access control and alarms.There is a Green Power LED Yellow Fault LED Blue Access LED and Red Alarm LEDThe keypad can display the status of an area or complete system via the status indication LED in between the navigation keys. When Green the area or system is disarmed when Red the system is an armed or part armed state.MountingThe ATS1136 can be mounted by using the mounting points in the backplate which also provides easy cable entry to connect the panel to the removable bus connector. A backplate ATS1135BPL is available which can be used to cover the dimensions of a legacy keypad when updating an installation to the Advisor Advanced system.Key FeaturesStylish designSimplified end user operationLarge 2 x 16 characters LCDUser adjustable LCD buzzer and key lightsBuilt-in secure Mifare Desfire EV1EV2 readerSupports Secure Mifare secure mode or Mifare 4 or 7 byte CSNUID Unsecure modeUse secure ATS145x series cards or custom cardsSupported as of Advisor Advanced version MR4.23 programmable function keys

GBP 155.95
1

STI STI-6402-T-O Exit StopperDouble Door- Spec Trapped in OFF position

STI STI-6402-T-O Exit StopperDouble Door- Spec Trapped in OFF position

STI STI-6402-T-O Exit StopperDouble Door- Spec Trapped in OFF positionStop fire doors from being left open by unauthorised personnel. An alternative to the Exit Stopper the Exit Stopper II is a unique and highly effective way to alert you to fire doors that have been left open by unauthorised personnel. It can also serve as an inexpensive security device and help prevent theft.How it Works If the protected door is opened the electronic Exit Stopper II emits an ear piercing alarm. When the door is closed the alarm is deactivated and the device automatically resets itself. A key operated override facility will also silence the alarm and allow authorised exits. The Exit Stopper II is fitted with a 9V PP3 alkaline battery. It is available in red or green and can be mounted or installed on almost any type of door including remote placement of the sounder.Key FeaturesCompletely self-contained electronic door alarm.Highly visible stop sign discourages unauthorised use of emergency doors.Fitted with a 9V PP3 alkaline battery included.Key operated override facility.Highly versatile can be mounted or installed on almost any type of door.Available in red or green.Can be installed and protecting doors in minutes.Lifetime guarantee against breakage of polycarbonate housing one year on electronic components.Virtually indestructible polycarbonate housing.Remote powered 12 or 24 VDC model available for special applications.Compact design 136mm in diameter and 50mm deep.

GBP 143.11
1

Fireclass 568.800.034FC HVR800 High Voltage Relay Module In D800 Housing

Fireclass 568.800.034FC HVR800 High Voltage Relay Module In D800 Housing

Fireclass 568.800.034FC HVR800 High Voltage Relay Module In D800 HousingThe HVR800 is a non-addressable device designed to allow a low current main rated relay to switch up to 10A. Alternatively a low voltage drive signal such as that provided by the RIM800 or 80 way mimic can be used to switch the integral mains relay.Key FeaturesD800 housing- 5 A 240 VacDimensions WxHxD 42x26.5x74 mmOperating Temperature -25 to 70 CStorage Temperature -45 to 80 CRelative Humidity 95 non-condensing

GBP 90.48
1

RGL Electronics 1203SM-2MP 13.8V DC Power Supply In A Large Housing

RGL Electronics 1203SM-2MP 13.8V DC Power Supply In A Large Housing

RGL Electronics 1203SM-2MP 13.8V DC Power Supply In A Large HousingThe 1203SM-2MP is a 13.8V DC power supply in a large housing with a multi-indicator.It includes the Mains Battery PSU monitoring via voltage free outputs and is designed to house up to 2 x 9 Ah battery.Additional battery charging of 300mA - includes Deep Discharge Protection.Key FeaturesBattery mains monitoringMild steel constructionWhite powder coated finishHinged style boxWiring productMore efficient and environmentally friendlyTop. bottom and rear cable entryFront tamperTechnical SpecificationsFull current to load3 Amp PSU13.8VDC regulated outputAdditional battery chargingDeep discharge protectionCurrent limitingShort circuit protectionMains transient protectionCompliant to EMC EN61000-6-1 3Can house 2 batteries up to 12V 9Ah

GBP 93.29
1

RGL Electronics WL-EBLPP02BK Radio Transmitter Fitted In DDA Stainless Steel Product

RGL Electronics WL-EBLPP02BK Radio Transmitter Fitted In DDA Stainless Steel Product

RGL Electronics WL-EBLPP02BK Radio Transmitter Fitted In DDA Stainless Steel ProductThe WL-EBLPP04BK large push to open DDA button with 433MHz radio receiver. Includes programmable remote and battery.BUTTON Contacts Double pole NONC contact Output 4 AMP contact 30 V ACDC Wear resistant legend Security screws Allen key type Voltage free contacts Momentary switch Can be surface or flush fitting Easy clean surface. Ideal for generalsensitive areas Screw footprint for flush fitting onto standard back boxRECEIVER Internal use only entry level Power input 12VDC Operates on 433Mhz Relay 10A - 120VAC 20A - 14VDC Jumper in position - Toggled Durable plastic Relay contacts can be toggled Programmable remote Supplied with 27A type battery

GBP 89.46
1

Advanced 20-VMC100-ADV Single Relay Powered Output Module With Built In Isolator

Advanced 20-VMC100-ADV Single Relay Powered Output Module With Built In Isolator

Advanced 20-VMC100-ADV Single Relay Powered Output Module With Built In IsolatorThe single output module is loop powered designed around a fully digital protocol and provides control by activating equipment for DDA compliance such as vibrating pillows. The output channel is monitored and will detect open and short circuit conditions.The unit provides a fast and secure response and incorporates a bidirectional short circuit isolator. Connections are made using plug-in terminal blocks which will accept conductors up to 2.5mm.The unit is supplied fixed to a plate which is suitable for wall mounting. Standard 25mm or deep 47mm mounting boxes are available.Key FeaturesShort circuit isolators in each device to the requirements of EN54- 17Auto addressing capability by the control panel or manually using a handheld programmerDigital checking of double addressLine quality informationBicolour red green LED driven by the control panel

GBP 131.62
1

RGL Electronics 2405SM-2MP 27.6V DC Power Supply In A Large Housing

RGL Electronics 2405SM-2MP 27.6V DC Power Supply In A Large Housing

RGL Electronics 2405SM-2MP 27.6V DC Power Supply In A Large HousingThe 2405SM-2MP is a 27.6V DC power supply in a large housing with a multi-indicator.It Includes Mains Battery PSU monitoring via voltage free outputs and is designed to house up to 2 x 9 Ah battery.Ideal for fire systems and 24 Volt systems that require a battery backup i.e. Access Control Entry Systems and General use.Key FeaturesBattery mains monitoringMild steel constructionWhite powder coated finishHinged style boxWiring productMore efficient and environmentally friendlyTop. bottom and rear cable entryFront tamperTechnical SpecificationsFull current to load27.6VDC regulated outputAdditional battery chargingDeep discharge protectionCurrent limitingShort circuit protectionMains transient protectionCompliant to EMC EN61000-6-1 3Can house 2 batteries up to 12V 9Ah

GBP 153.74
1