hakomi mindfulness-centered somatic psychotherapy: a comprehensive guide to theory and practice from GBP 176 | See the cheapest prices and offers on css.lazzaweb.dk

C-Tec QTS240 12 Months Access To Quantec Surveyor2 - 40 Users

C-Tec QTS240 12 Months Access To Quantec Surveyor2 - 40 UsersThe QTS240 offers a comprehensive 12-monthaccess subscription to the Quantec Surveyor2 for up to 40 users.

GBP 197.41

1

Morley IAS MI-DRS-1 Door Release Module and System BS7273-4

Morley IAS MI-DRS-1 Door Release Module and System BS7273-4BS7273 part 4 2007 is the code of practice governing door holders and door release mechanisms. The Morley-IAS door release system offers a compliant solution to meet the requirements of section 5 of BS7273-4 Category A installations.The DRM-1 module has been designed for use in conjunction with the existing output module and wider fire system to meet the requirements of section 5 of BS7273-4 Category A installations. The MI-DRS-1 compromises of a door release module and single input which has been prewired and mounted into a surface mounting box.Key FeaturesAdditional failsafe mechanism to meet the code of practice requirements of BS7273-4 section 5.Visual indication of loop power status loop communication and activation statusStandalone module available for retrofit DRM-1Door release system package MI-DRS-1 available for new installationsDual time delay settings in line with BS- 7273-4Additional volt free relayDin rail mountableCompatible with Morley-IAS module enclosure rangeConsistent design with other Morley-IAS modules

GBP 255.32

1

Kentec K1821-49 Sigma A SI Extinguishant Status Unit - 10 Lamp Mode Select and Manual

Kentec K1821-49 Sigma A SI Extinguishant Status Unit - 10 Lamp Mode Select and ManualThe Sigma A-Si range of status indicators provides detailed status information for Sigma A-XT releasing control equipment.All models provide high brightness LED indication of Manual Only Automatic and Manual Abort Operated Disabled Imminent and Released conditions. Models are also available with zonal fire indicators and a common trouble indicator.For systems where local control of the AutomaticManual mode and or a Manual extinguishant release control are required units are available with these controls fitted. All models have supervised inputs for the remote connection of AutomaticManual mode and abort switches.All units contain a large LED display that shows a countdown of the time remaining until release in seconds.Up to seven Sigma A-SI status units can be connected to the Sigma A-XT serial bus and require just two cores for data and two cores for power. Once connected status units are supervised and the Sigma A-XT control panel will indicate a trouble condition should any unit become disconnected.Key FeaturesHigh brightness LEDsDetailed indication of the status of the Control PanelSupervised data connectionCountdown shows time remaining until releaseManual only and Automatic Manual mode selectFour-wire connection data and powerProtected dual action manual release switch optionOption for zonal fire and trouble indication with buzzerRobust high quality enclosureEasy access to terminalsRemote AutoManual door interlock input supervisedRemote Abort input supervisedInternal trouble diagnosis indicators

GBP 211.39

1

Kentec K1821-47 Sigma A SI Extinguishant Status Unit - 6 Lamp Mode Select and Manual

Kentec K1821-47 Sigma A SI Extinguishant Status Unit - 6 Lamp Mode Select and ManualThe Sigma A-Si range of status indicators provides detailed status information for Sigma A-XT releasing control equipment.All models provide high brightness LED indication of Manual Only Automatic and Manual Abort Operated Disabled Imminent and Released conditions. Models are also available with zonal fire indicators and a common trouble indicator.For systems where local control of the AutomaticManual mode and or a Manual extinguishant release control are required units are available with these controls fitted. All models have supervised inputs for the remote connection of AutomaticManual mode and abort switches.All units contain a large LED display that shows a countdown of the time remaining until release in seconds.Up to seven Sigma A-SI status units can be connected to the Sigma A-XT serial bus and require just two cores for data and two cores for power. Once connected status units are supervised and the Sigma A-XT control panel will indicate a trouble condition should any unit become disconnected.Key FeaturesHigh brightness LEDsDetailed indication of the status of the Control PanelSupervised data connectionCountdown shows time remaining until releaseManual only and Automatic Manual mode selectFour-wire connection data and powerProtected dual action manual release switch optionOption for zonal fire and trouble indication with buzzerRobust high quality enclosureEasy access to terminalsRemote AutoManual door interlock input supervisedRemote Abort input supervisedInternal trouble diagnosis indicators

GBP 176.16

1

Kentec K1821-17 Sigma A SI Extinguishant Status Unit - 6 Lamp Mode Select and Manual - Red

Kentec K1821-17 Sigma A SI Extinguishant Status Unit - 6 Lamp Mode Select and Manual - RedThe Sigma A-Si range of status indicators provides detailed status information for Sigma A-XT releasing control equipment.All models provide high brightness LED indication of Manual Only Automatic and Manual Abort Operated Disabled Imminent and Released conditions. Models are also available with zonal fire indicators and a common trouble indicator.For systems where local control of the AutomaticManual mode and or a Manual extinguishant release control are required units are available with these controls fitted. All models have supervised inputs for the remote connection of AutomaticManual mode and abort switches.All units contain a large LED display that shows a countdown of the time remaining until release in seconds.Up to seven Sigma A-SI status units can be connected to the Sigma A-XT serial bus and require just two cores for data and two cores for power. Once connected status units are supervised and the Sigma A-XT control panel will indicate a trouble condition should any unit become disconnected.Key FeaturesHigh brightness LEDsDetailed indication of the status of the Control PanelSupervised data connectionCountdown shows time remaining until releaseManual only and Automatic Manual mode selectFour-wire connection data and powerProtected dual action manual release switch optionOption for zonal fire and trouble indication with buzzerRobust high quality enclosureEasy access to terminalsRemote AutoManual door interlock input supervisedRemote Abort input supervisedInternal trouble diagnosis indicators

GBP 176.16

1

Kentec K1821-19 Sigma A SI Extinguishant Status Unit - 10 Lamp Mode Select and Manual - Red

Kentec K1821-19 Sigma A SI Extinguishant Status Unit - 10 Lamp Mode Select and Manual - RedThe Sigma A-Si range of status indicators provides detailed status information for Sigma A-XT releasing control equipment.All models provide high brightness LED indication of Manual Only Automatic and Manual Abort Operated Disabled Imminent and Released conditions. Models are also available with zonal fire indicators and a common trouble indicator.For systems where local control of the AutomaticManual mode and or a Manual extinguishant release control are required units are available with these controls fitted. All models have supervised inputs for the remote connection of AutomaticManual mode and abort switches.All units contain a large LED display that shows a countdown of the time remaining until release in seconds.Up to seven Sigma A-SI status units can be connected to the Sigma A-XT serial bus and require just two cores for data and two cores for power. Once connected status units are supervised and the Sigma A-XT control panel will indicate a trouble condition should any unit become disconnected.Key FeaturesHigh brightness LEDsDetailed indication of the status of the Control PanelSupervised data connectionCountdown shows time remaining until releaseManual only and Automatic Manual mode selectFour-wire connection data and powerProtected dual action manual release switch optionOption for zonal fire and trouble indication with buzzerRobust high quality enclosureEasy access to terminalsRemote AutoManual door interlock input supervisedRemote Abort input supervisedInternal trouble diagnosis indicators

GBP 211.39

1

STI STI-7511A-HTR-UK UK Heated Polycarbonate Enclosure A Backbox and Thumblock12

STI STI-7511A-HTR-UK UK Heated Polycarbonate Enclosure A Backbox and Thumblock12These multipurpose UV-stabilised polycarbonate enclosures are available with heater andor air conditioner facility. They are designed to protect larger sized sensitive equipment like alarm control panels from extreme temperatures. They also protect from vandalism or accidental damage whilst retaining the desired operating temperatures. The HTR models are fitted with a radiant heat plate which prevents LCD displays from becoming sluggish or freezing.Key FeaturesDesigned to maintain temperature above freezingExterior key lock and enclosed deep back boxHeater has three thermostatsRadiant heat plate prevents LCD displays from becoming sluggish or freezing3 year guarantee 1 yr on electronics142 mm H x 191 mm W x 131 mm D

GBP 194.09

1

Aritech VV700RA Vault Safe And ATM Seismic Detector - PC Programmable With Form A Relay - CPNI Approved

Aritech VV700RA Vault Safe And ATM Seismic Detector - PC Programmable With Form A Relay - CPNI ApprovedThe VV700 is the first fully digital seismic detector using a microprocessor that gives 100 digital signal analysis. That means the VV700 is completely adaptable for all types of applications without any compromises in detection ability. As the detector is programmed on site it can be perfectly adapted to the environment and eliminate false alarms. With this new technology the detector allow room for several different signal analysis programmes in the same hardware which previously only allowed for one. This makes the VV700 to a fully universal detector suitable for all known applications like safes vaults vault doors ATMs Night Safe Deposit Boxes weapon stores etc.The seismic detector reacts to the characteristic vibration patterns of all breaking-and-entering tools such as hammers drills diamond saws hydraulic pressure tools and thermal tools like welding torch and thermal lance. It senses vibrations that occur with a 3 to 14 meter radius of where they are mounted depending on the material and design of the protected object.The VV700 features a plug-in connection for all transponders designed in accordance with the draft standard IEC 839-2. In this way the transponder is integrated in the housing of the detector and is easily installed without any cabling or separate housing for the transponder. If you dont have your own transponder the VV700 must have another plug-in board connected to the detector e.g. the Form A relay board VVI760 or the Form C relay board VVI770. A complete range of accessories is provided for all kinds of applications to achieve the highest security.Key FeaturesUniversal seismic detectorDigital signal processingSpecial configuration program SCM700Programmable on site equal 100 flexibilityEasy programming from laptopSpecial analysing software for on-site performance measurementsCompatible to all existing VV600 Plus accessories

GBP 221.96

1

Advanced MXP-651 5.0A 24V EN54-4 PSE amp Battery Charger - Large Up To 2x 17Ah Batteries

Advanced MXP-651 5.0A 24V EN54-4 PSE Battery Charger -Large Up To 2x 17Ah BatteriesThe Advanced MXP-650 2.5A and MXP-651 5.0A power supplyunits can be used for any fire alarm system including AOV systems. They arecertified to EN54-4 by VdS and EN12101-10 by AFNOR ensuring reliable and safeoperation. Suited for almost any application the power supply unit and batterycharger have been developed using the latest technology to provide ahigh-efficiency switch-mode power supply.The units include intelligent battery charging technologymains and battery monitoring including two independent volt-free outputs. Inaddition they also provide deep battery discharge protection in case of aprolonged mains failure. The inclusion of LED indicators provides quick status diagnosticsof the power supply. These power supply units complement the MXP-549 1.5A.ApplicationsThese power supply units can be used in any fire alarm installationrequiring a 24volt supply for operation and which specifies EN54-4 powersupplies e.g. BS 5839 code of practice EN12101 and AOV systems. Ensuringreliable and safe operation they are certified to EN54-4 and EN12101-10 byAFNOR and VdS EN54-4 only.Key FeaturesA range of power supply equipment with power output options tosuit most applicationsUniversal AC input on the 2.5A and 5.0A versionsIndependently monitored dual outputs of 27.6VdcHigh efficiency switched mode power suppliesAlternative enclosure sizes to support standby batterybackup optionsExterior status LEDs to support diagnosticsLoad-sharing supporting either rapid charging or brief high-currentpeak-loadsNo output interruption during automatic switchover between mainsand battery powerDeep discharge protection disconnects battery from load whenoutput voltage falls below 21.6VSelf-resetting battery fuse protection

GBP 412.88

1

Elmdene GEN3-34-R 13.8v 3A SMPSU Dual Battery

Elmdene GEN3-34-R 13.8v 3A SMPSU Dual BatteryThe GEN series of switch mode power supplies has been specifically designed to provide a comprehensive and flexible range for engineers designing intruder alarm systems to Grade 2 and Grade 3 under EN50131-62017 and PD66622017Key Features13.8V dc outputCost effective switch mode technologyEnergy efficientFull current to load plus additional current to charge standby batteryInternal LED PSU statusMains transient protection

GBP 199.39

1

Cooper EC0232 Lon to RS232 Adapter

Cooper EC0232 Lon to RS232 AdapterThe Lon to RS232adapter EC0232allows connection of the Cooper system network LonWorks devices to PC based applications such as site monitor site graphics.The EC0232PAVA offers a similar interfacing facility to the HMX PAVA public addressvoice alarm system by withholding the handshaking functionality and if required the EC0232PAVA3D offers an additional 3 minute time delay before the voice alarm function is actuated. The bi-directional link allows the status of the HMX PAVA system to be displayed and monitored at the control panel. Different messages may be played depending on the configuration of the cause and effect programming.The interface may be located anywhere on the Cooper peer to peer network allowing information from any intelligent addressable control panel to be routed through the bi-directional RS232 port to PC or PAVA system.Key FeaturesAllows connection of Cooper system network devices to PC based applicationsCan be connected at any point on peer to peer networkAllows Cooper system network to be connected to PC or PAVABenefitsIntegrates PC based applicationsIntegrates PAVA systems site monitor and graphpackFlexibility to use any PC application

GBP 406.33

1

Aritech ATS1745 ATS Databus To Lan Adapter

Aritech ATS1745 ATS Databus To Lan AdapterRS485 databus to IP-LAN interface connects two ATS-bus RS485 devices via local IP networkSave time and money installing ATS systems with the new ATS1745 IP LAN Adaptor. The ATS1745 modules allow ATS RS-485 LAN data to be carried over a local IP network. This provides an IP connection between an ATS Master or ATS Advanced panel and its LAN devices such as readers and keypads RASRKP expanders including Intelligent DoorLift Controllers DGPEXP reducing the need for dedicated wiring of two-pair twisted cable WCAT52 or WCAT54.Key FeaturesATS 485 Bus deviceConnects two or more ATS devices over a local IP connectionSupported on ATS Master and ATS Advanced MR3 and later128 bit AES secure data communicationEasy configuration using built-in web serverUp to 31 End-Of-Line modules connected over IP to 1 Start-Of-Line moduleDevice configurable as Start-Of-Line or End-Of-Line moduleNetwork Test Tools allows to check network latency and suitability

GBP 182.57

1

Zeta SCM-LAN TCPIP Module Connection To Zeta Remote

Zeta SCM-LAN TCPIP Module Connection To Zeta RemoteThe Local area network module provides a Smart Connect Multiloop CIE with a TCP IP connection that allows the panel to report events to an external monitoring system such as Data-Log or Zeta Remote.Key FeaturesDesigned to meet EN54 requirementsTCP-IP output via RJ45Zeta Remote monitoring via a desktop PC or smartphone via the cloudRemote control via the cloudResponsive web interfaceHeartbeat LED that shows communication between the module and the motherboardExtensive front unit indicationsQuick and simple to install

GBP 345.01

1

Nursecall Intercall 700 Series Dementia Controller

Nursecall Intercall 700 Series Dementia ControllerThe Intercall Dementia Controller is designed as a non-intrusive system to monitor resident rooms. The call system detects when a resident is out of bed and activates room lighting helping to reduce the risk of a fall. Staff are alerted through the Intercall nurse call system in the event of abnormal behaviour.By controlling the lighting in the bedroom and ensuite WC areas the unit helps guide a confused resident to the bathroom and back to bed without the need for staff intervention. In the event that the residents movements do not represent normal behaviour an alarm is automatically raised and staff are alerted through the nurse call system. In addition the unit can be congured to monitor bedroom and patio doors to alert staff immediately should the resident leave the bedroom.Key FeaturesSimple non-intrusive monitoring without restriction to residentEasy to use two button operations with clear LCD screenControls bed WC lights to guide confused residentResident activity recorded using the IP Power SupplyFully compatible with Intercall 600700 Nursecall SystemOn site configurable options for specific client requirements

GBP 330.48

1

Lexicomm ViLX-OSA Surface Type A Fire Telephone Handset

Lexicomm ViLX-OSA Surface Type A Fire Telephone HandsetAn EVCS is a fixed secure bi-directional full duplex voice communication system to assist fire fighters during emergencies in high rise buildings or large sites where radio communication cannot be guaranteed to work due to interference from the fire corona. BS5839-92011 covers the design installation and operation of fire telephones and disabled refuge systems in buildings and where both systems are fitted to a building the standard specifies these should form a single system.The ViLX-OSA is a Type A EVCS outstation compatible with the Lexicomm standalone and network systems. The outstation is supplied in a brushed stainless finish with a high contrast red screen print with a rugged red telephone handset behind the push door. A stainless-steel bezel is available to allow the outstation to be flushed into a wall reducing the need to stock flush and surface variants.Key FeaturesCompact DesignRuggedised HandsetHigh Volume RingerStatus LED20mm Cable Gland knock-outTelecoil for hearing impaired usersFull Duplex OperationFully Compliant to BS5839-92011Magnetic Push CatchStainless Steel as standardFlush bezel available

GBP 321.90

1

Aritech ATS1743 Data Bus To Fibre Optic Module

Aritech ATS1743 Data Bus To Fibre Optic ModuleThe ATS1743 is a RS485 to optical fibre interface for directly extending the Advisor MASTER data bus with optical fibre. The maximum fibre distance can be up to 1 km the next ATS1743 and a maximum of 2 pairs can be cascaded when the normal copper data bus wiring length is not extending more than 1.5 km to the panel. The great advantage of using optical fibre is that in general optical fibre is not subject to electromagnetic interference and there is less need to retransmit signals.The ATS1743 is only designed for multimode optical fibre and can operate in 2 modes Uni-direction - two fibres Bi-directions - one fibre There are two independent optical channels on the unit which can be used with two fibers when you need a bit more power in case of signal loss by junctions etc. The most economical connection is the bi-directions fiber connection. Only one fiber is necessary in this situation.Key FeaturesRS485 to optical fibre interfaceMaximum fibre distance can be up to 1.5 kmMaximum 2 units can be cascadedUni-direction two fibres or Bi-directions one fibre mode can be usedMultimode optical fibre only

GBP 408.92

1

FIRERAY End-to-End Detector Ceiling Mount 1141-000

FIRERAY End-to-End Detector Ceiling Mount 1141-000Ceiling Pendant Mount for the End To End Transmitter and Receiver units. Includes a 3000-202 Mounting Plate. Supplied with a 8 long nipple. Can be used for Single or Bi-directional applications. Does not include Detector Head. White in colour.

GBP 330.60

1

Fike 520-0010 CIE-A-200 Repeater Panel

Fike 520-0010 CIE-A-200 Repeater PanelThe 520-0010 is a repeater control panel with a built in PSU designed to connect with the Fike CIE-A-200 1 Loop Addressable Fire Alarm Panel.The repeater panel provides control of the system from a remote location to the master panel and up to 8 repeater panels can be installed on a single system.It requires a mains power supply and 2 x 12v 12Ah Sealed Lead Acid batteries for back-up power supply.Key FeaturesRepeater control panel for the Fike CIE-A-200 1 loop addressable fire panelUp to 8 repeater panels can be connected on the same systemAllows control of the system from remote locations to the main fire panelRequires mains supply and 2 x 12v 12Ah SLA batteries

GBP 293.66

1

Ziton ZP3AB-NLM3 Class-A Network Loop Module

Ziton ZP3AB-NLM3 Class-A Network Loop ModuleThe ZP3AB-NLM network loop module enables individual ZP3 control panels to be connected in a peer to peer secure loop network. If there is an open or short circuit present on the network wiring the NLMs determine where the fault lies isolate the faulty section of wiring and maintain full loop integrity.Total cable length throughout the network can be up to a maximum of two kilometres and may be extended by setting designated NLM modules as booster units contact Ziton technical support department for full details. Communication between loop modules operates by RS485 protocol over screened twisted pair wiring.Unique address on the network loopZP3AB-NLM3 modules connect to ZP3 control panels via a ZP3AB-NET1 card and are designed to fit onto an auxiliary chassis inside each control panel or auxiliary equipment cabinet. Each ZP3 control panel is connected to the loop network through an ZP3AB-NLM3 module. All modules incorporate switch settings enabling them to be assigned a unique loop address. An output fault signal is provided by a volt free changeover relay with contacts rated at 1A at 230VDC30VAC.Diagnostic and system indicationIn each network loop one module must be set to address 1 and designated as the master. This device manages the healing sequence and monitors loop integrity. All other modules are connected to the network loop in slave mode.In slave mode modules can operate in multiple modesBoost - serving as an interconnection between panels at distances over 1000 metresHealing establishing the condition of the loop and isolating sections if necessaryRecovered normal condition after a section isolationDiagnostic system interrogation to establish the location of a break in the loop wiringIn addition to indications of data being transmitted and received from each port LED indicators are also provided for System OK Loop Fault Loop Open and Data Error.Key FeaturesProvides a secure loop networkEnhanced LED diagnosticsBoost mode for long cable runsPropagation time periods for third party equipment operationCommunications screen isolation between input and output channels

GBP 277.06

1

Nitrogen Regulator and Hose NRH

Nitrogen Regulator and Hose NRHThe nitrogen regulator and hose are an essential piece of equipment for all fire extinguisher engineers. When used in conjunction with the adapter set the nitrogen regulator is used for the pressurising of fire extinguishers.Key FeaturesTo be used in conjunction with the fire extinguisher adapter kitAllows for fire extinguishers to be re-pressurisedThe valve assembly is made from high quality solid brassEasy to useAn essential piece of fire extinguisher engineer equipmentTested to 200 bar pressures25mm quick-fit adaptorComplete with a Schrader fitting and hose

GBP 350.18

1

Kentec K1822-40 Boxed Sigma A-XT Ancillary PCB Grey

Kentec K1822-40 Boxed Sigma A-XT Ancillary PCB GreyThe Sigma A-XT Ancillary Board is compatible with all Sigma A-XT control panels. The board provides volt-free normally-open contacts enabling control of sub-systems and plant remotely from the main panel over a two-wire data bus.Ancillary boards require only a two-core data cable from the main control panel and a two-core power cable from the main panel.Up to seven Ancillary boards can be connected to a control panel and each is allocated an address from one to seven using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 4000 feet.A mixture of status units and Ancillary boards up to a maximum of seven of each type can be connected to the serial data bus.

GBP 234.90

1

Kentec K1822-10 Boxed Sigma A-XT Ancillary PCB Red

Kentec K1822-10 Boxed Sigma A-XT Ancillary PCB RedThe Sigma A-XT Ancillary Board is compatible with all Sigma A-XT control panels. The board provides volt-free normally-open contacts enabling control of sub-systems and plant remotely from the main panel over a two-wire data bus.Ancillary boards require only a two-core data cable from the main control panel and a two-core power cable from the main panel.Up to seven Ancillary boards can be connected to a control panel and each is allocated an address from one to seven using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 4000 feet.A mixture of status units and Ancillary boards up to a maximum of seven of each type can be connected to the serial data bus.

GBP 234.90

1

Morley HON-CGW-MBB Fixed CLSS Gateway Ethernet and Wifi

Morley HON-CGW-MBB Fixed CLSS Gateway Ethernet and WifiThe CLSS Gateway is Honeywell Fires interface connecting to a Honeywell fire system panel or network serving as a portal between the panel the Cloud and peripheral devices.The CLSS Gateway enables reading the connected device system inventory from one panel or a network of panels and transmitting this data to the Connected Life Safety Services CLSS Cloud. The gateway board can be connected with the CLSS Cloud a configuration computer a panel a mobile device and an external power supply. The CLSS Gateway is a key component for optimizing CLSS functionality.The CLSS Gateway can also be used as a Fire Alarm Communicator to central station when used with the optional cellular module and feature activation.Key FeaturesConnects directly to Honeywell Fire AlarmControl Panels or a network of FACPsEasy connection between the Gateway and CLSS CheckPoint mobile applicationBlueTooth mobile pairing for Gateway Configuration and Control capabilityWireless or Wired Connection from the Gateway to the CLSS CloudServes as a Fire Alarm Communicator to central station when used with optional cellular module and feature activationThe FACP connected to the Gateway the master panel collects system data and sends it to the Cloud via the GatewayCan be used for portable or permanently installed applications

GBP 332.27

1

Crowcon SS0315 0-100 FLAM MPS Sensor UL

Crowcon SS0315 0-100 FLAM MPS Sensor ULA replacement 0-100 FLAM MPS Sensor UL.Crowcon offer a comprehensive range of configurable options that have evolved from decades of global experience. This makes them highly suitable for a wide range of extreme environmental and industrial settings.

GBP 320.76

1

Hyfire HFW-CEM-02 Wireless to Conventional Interface Module

Hyfire HFW-CEM-02 Wireless to Conventional Interface Module Requires Power SupplyThe Hyfire HFW-CEM-02 Conventional Expander Module has been designed to allow the integration of wireless detection and alarm type field devices into almost any type of system. Regardless of whether the system is intelligent or conventional the unit can be simply connected to a conventional zone sounder circuit or both directly or via loop modules.The wireless field devices connect to the system as non-addressable devices however still utilise the same well-proven wireless technology as Hyfire intelligent wireless devices and are fully monitored for alarm and fault ensuring the highest levels of life safety and reliability are maintained.Key Features3rd party Approval to EN54-18 and EN54-25Bi-directional wireless communication5 year product warrantyIP protection for mounting in challenging environmentsLow current consumptionDevices are fully monitored for alarm and faultCompatible with up to 7 expander modulesProven wireless technologyCompatible with most system typesSite programmable

GBP 283.82

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)