2.343 results (0,13092 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Cooper EC0232 Lon to RS232 Adapter

Cooper EC0232 Lon to RS232 Adapter

Cooper EC0232 Lon to RS232 AdapterThe Lon to RS232adapter EC0232allows connection of the Cooper system network LonWorks devices to PC based applications such as site monitor site graphics.The EC0232PAVA offers a similar interfacing facility to the HMX PAVA public addressvoice alarm system by withholding the handshaking functionality and if required the EC0232PAVA3D offers an additional 3 minute time delay before the voice alarm function is actuated. The bi-directional link allows the status of the HMX PAVA system to be displayed and monitored at the control panel. Different messages may be played depending on the configuration of the cause and effect programming.The interface may be located anywhere on the Cooper peer to peer network allowing information from any intelligent addressable control panel to be routed through the bi-directional RS232 port to PC or PAVA system.Key FeaturesAllows connection of Cooper system network devices to PC based applicationsCan be connected at any point on peer to peer networkAllows Cooper system network to be connected to PC or PAVABenefitsIntegrates PC based applicationsIntegrates PAVA systems site monitor and graphpackFlexibility to use any PC application

GBP 406.33
1

Nursecall Intercall 700 Series Dementia Controller

Nursecall Intercall 700 Series Dementia Controller

Nursecall Intercall 700 Series Dementia ControllerThe Intercall Dementia Controller is designed as a non-intrusive system to monitor resident rooms. The call system detects when a resident is out of bed and activates room lighting helping to reduce the risk of a fall. Staff are alerted through the Intercall nurse call system in the event of abnormal behaviour.By controlling the lighting in the bedroom and ensuite WC areas the unit helps guide a confused resident to the bathroom and back to bed without the need for staff intervention. In the event that the residents movements do not represent normal behaviour an alarm is automatically raised and staff are alerted through the nurse call system. In addition the unit can be congured to monitor bedroom and patio doors to alert staff immediately should the resident leave the bedroom.Key FeaturesSimple non-intrusive monitoring without restriction to residentEasy to use two button operations with clear LCD screenControls bed WC lights to guide confused residentResident activity recorded using the IP Power SupplyFully compatible with Intercall 600700 Nursecall SystemOn site configurable options for specific client requirements

GBP 330.48
1

Aritech GS960-TR GS960 Tester And Calibration Tool For Optimal Functioning Of The Sensor In The Acoustic Space

Aritech GS960-TR GS960 Tester And Calibration Tool For Optimal Functioning Of The Sensor In The Acoustic Space

Aritech GS960-TR GS960 Tester And Calibration Tool For Optimal Functioning Of The Sensor In The Acoustic SpaceThe GS960-TR tester is a specially developed tool for calibrating and adjusting the GS960 Series for optimal function in the acoustic space the DRC Digital Room Compensation procedure. Using this tool to test the detector settings you do not need to open it again as the tester will communicate with the detector acoustically.

GBP 209.59
1

Aritech ATS1743 Data Bus To Fibre Optic Module

Aritech ATS1743 Data Bus To Fibre Optic Module

Aritech ATS1743 Data Bus To Fibre Optic ModuleThe ATS1743 is a RS485 to optical fibre interface for directly extending the Advisor MASTER data bus with optical fibre. The maximum fibre distance can be up to 1 km the next ATS1743 and a maximum of 2 pairs can be cascaded when the normal copper data bus wiring length is not extending more than 1.5 km to the panel. The great advantage of using optical fibre is that in general optical fibre is not subject to electromagnetic interference and there is less need to retransmit signals.The ATS1743 is only designed for multimode optical fibre and can operate in 2 modes Uni-direction - two fibres Bi-directions - one fibre There are two independent optical channels on the unit which can be used with two fibers when you need a bit more power in case of signal loss by junctions etc. The most economical connection is the bi-directions fiber connection. Only one fiber is necessary in this situation.Key FeaturesRS485 to optical fibre interfaceMaximum fibre distance can be up to 1.5 kmMaximum 2 units can be cascadedUni-direction two fibres or Bi-directions one fibre mode can be usedMultimode optical fibre only

GBP 408.92
1

Zeta SCM-LAN TCPIP Module Connection To Zeta Remote

Zeta SCM-LAN TCPIP Module Connection To Zeta Remote

Zeta SCM-LAN TCPIP Module Connection To Zeta RemoteThe Local area network module provides a Smart Connect Multiloop CIE with a TCP IP connection that allows the panel to report events to an external monitoring system such as Data-Log or Zeta Remote.Key FeaturesDesigned to meet EN54 requirementsTCP-IP output via RJ45Zeta Remote monitoring via a desktop PC or smartphone via the cloudRemote control via the cloudResponsive web interfaceHeartbeat LED that shows communication between the module and the motherboardExtensive front unit indicationsQuick and simple to install

GBP 345.01
1

Aritech ATS1745 ATS Databus To Lan Adapter

Aritech ATS1745 ATS Databus To Lan Adapter

Aritech ATS1745 ATS Databus To Lan AdapterRS485 databus to IP-LAN interface connects two ATS-bus RS485 devices via local IP networkSave time and money installing ATS systems with the new ATS1745 IP LAN Adaptor. The ATS1745 modules allow ATS RS-485 LAN data to be carried over a local IP network. This provides an IP connection between an ATS Master or ATS Advanced panel and its LAN devices such as readers and keypads RASRKP expanders including Intelligent DoorLift Controllers DGPEXP reducing the need for dedicated wiring of two-pair twisted cable WCAT52 or WCAT54.Key FeaturesATS 485 Bus deviceConnects two or more ATS devices over a local IP connectionSupported on ATS Master and ATS Advanced MR3 and later128 bit AES secure data communicationEasy configuration using built-in web serverUp to 31 End-Of-Line modules connected over IP to 1 Start-Of-Line moduleDevice configurable as Start-Of-Line or End-Of-Line moduleNetwork Test Tools allows to check network latency and suitability

GBP 182.57
1

Hyfire HFW-CEM-02 Wireless to Conventional Interface Module

Hyfire HFW-CEM-02 Wireless to Conventional Interface Module

Hyfire HFW-CEM-02 Wireless to Conventional Interface Module Requires Power SupplyThe Hyfire HFW-CEM-02 Conventional Expander Module has been designed to allow the integration of wireless detection and alarm type field devices into almost any type of system. Regardless of whether the system is intelligent or conventional the unit can be simply connected to a conventional zone sounder circuit or both directly or via loop modules.The wireless field devices connect to the system as non-addressable devices however still utilise the same well-proven wireless technology as Hyfire intelligent wireless devices and are fully monitored for alarm and fault ensuring the highest levels of life safety and reliability are maintained.Key Features3rd party Approval to EN54-18 and EN54-25Bi-directional wireless communication5 year product warrantyIP protection for mounting in challenging environmentsLow current consumptionDevices are fully monitored for alarm and faultCompatible with up to 7 expander modulesProven wireless technologyCompatible with most system typesSite programmable

GBP 283.82
1

Eurotech EUW-CEM-02 Wireless to Conventional Expander Module Requires PSU

Eurotech EUW-CEM-02 Wireless to Conventional Expander Module Requires PSU

Eurotech EUW-CEM-02 Wireless to Conventional Expander Module Requires PSUThe Euro-fi EUW-CEM-02 Conventional Expander Module has been designed to allow the integration of wireless detection and alarm type field devices into almost any type of system. Regardless of whether the system is intelligent or conventional the unit can be simply connected to a conventional zone sounder circuit or both directly or via loop modules.The wireless field devices connect to the system as nonaddressable devices however still utilise the same well-proven wireless technology as Hyfire intelligent wireless devices and are fully monitored for alarm and fault ensuring the highest levels of life safety and reliability are maintained.Key Features3rd party Approval to EN54-18 and EN54-25Bi-directional wireless communication5 year product warrantyIP protection for mounting in challenging environmentsLow current consumptionDevices are fully monitored for alarm and faultCompatible with up to 7 expander modulesProven wireless technologyCompatible with most system typesSite programmable

GBP 255.94
1

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 7AH Batteries PSAS-30EN54

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 7AH Batteries PSAS-30EN54

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 7AH Batteries PSAS-30EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 238.13
1

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 38Ah Batteries PSAL-50EN54

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 38Ah Batteries PSAL-50EN54

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 38Ah Batteries PSAL-50EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 402.96
1

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-30EN54

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-30EN54

Haes 3.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-30EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 285.77
1

Haes 1.5amp 24vdc EN54 Battery Charger Power Supply Up To 7Ah Batteries PSAS-15EN54

Haes 1.5amp 24vdc EN54 Battery Charger Power Supply Up To 7Ah Batteries PSAS-15EN54

Haes 1.5amp 24vdc EN54 Battery Charger Power Supply Up To 7Ah Batteries PSAS-15EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 201.35
1

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-50EN54

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-50EN54

Haes 5.0amp 24vdc EN54 Battery Charger Power Supply Up To 18Ah Batteries PSAM-50EN54The Haes 1.5A 3.0A and 5.0A Power Supply Units are approved to EN54-4 by the British Standards Institute and can be used for any fire alarm system installation. Suited for many other applications the power supply unit battery charger has been developed using the latest surface mount technology to provide a high efficiency switch mode power supply housed in a robust lockable steel cabinet. The power supply units are available in enclosures of various sizes to suit different battery capacities up to 38Ah. Power and fault indication are provided.Key FeaturesHigh efficiency switched mode power suppliesCompact 1.5A 3.0A and 5.0A versionsFully compliant to EN54-4Power and fault indication3 year warranty as standardA range of power supply equipment with power output options to suit most applications.Wide AC input range on the 3.0A and 5.0A versionsAll models monitor the battery internal series resistance.

GBP 373.62
1

Kentec K1610245 Battery Box to Match Syncro Styling Max 65 AH Battery Surface

Kentec K1610245 Battery Box to Match Syncro Styling Max 65 AH Battery Surface

Kentec K1610245 Battery Box to Match Syncro Styling Max 65 AH Battery SurfaceK16000 series battery enclosures provide a convenient means of fitting extra batteries for increased standby capacity for fire protection and detection systems.Ranges are available to match Syncro styled or Sigma styled control equipment. All units are constructed with the same high-quality steel and with the same finish as the control equipment.A range of enclosure sizes is available allowing a broad range of battery sizes to be fitted.

GBP 297.34
1