duft diffuser from GBP 47 | See the cheapest prices and offers on css.lazzaweb.dk

X-FM LED 3 Hour Maintained Recessed Emergency Luminaire

X-FM LED 3 Hour Maintained Recessed Emergency LuminaireThe X-FM Light is designed for fullrecess-mounting in ceilings with only 10mm protrusion. The X-FM Light is perfect for maintaining a low profile while providing the essential protection required by legislation.Comprising a stove-enamelled sheet steel base fitted with a clear prismatic diffuser retained by a white bezel the X-FM Light is designed for use on escape routes. It passes the 850C hot-wire test as defined by ICEL.The diffuser is attached by captive screws and provides a seal to IP20. The gear tray is hinged for ease of installation and is easily removable to allow first fix of the base. The X-FML Light is available in white or a number of alternative finishes including British Standard RAL colour brass chrome and satin with an opal diffuser option.Key FeaturesChrome and gold finishes availableSelf-Test 3hr durationHinged gear trayRecess mountWhite high output LED light sourceIP20 ingress protection

GBP 70.63

1

C-Tec API AFILS Active Indicator Light

C-Tec API AFILS Active Indicator LightThe API AFILS Active plate includes two ultra-bright LEDs in a translucent diffuser over printed with the AFILS ear symbol. The LEDs illuminate when the outreach network is powered to indicate that an AFILS system is installed.

GBP 47.59

1

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65

Ringtail X-CS3M LED Maintained Self-Testing Bulkhead IP65The X-CS3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal External

GBP 55.91

1

X-XLP LED 230v Mains Decorative Luminaire

X-XLP LED 230v Mains Decorative LuminaireA quality decorative LED luminaire with sympathetic looks to please architects and designers the X-XLP demonstrates that mains and emergency LED lighting need no longer be a compromise.Comprising of a high quality polycarbonate enclosure with asteel gear tray and an elegantly shaped polycarbonate opal or prismatic diffuser suitable for use on escape routes 850 hot-wire test defined by ICEL. The X-XLP Light is designed for use in mains and emergency modes with instant on light. The diffuser is snap fitted via three locating lugs and provides a seal to IP20. A BESA entry is provided in the base with two 20mm conduit entries.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP20DALI and Self-Test optionsCentral Battery and Static inverter systemsAdditional trims to enhance individualityPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 83.95

1

X-CS3 LED 230v Mains LED IP65 Bulkhead

X-CS3 LED 230v Mains LED IP65 BulkheadThe X-CSL3M light is a high light output emergency bulkhead with the added benefit of utilising LEDs and a self-test facility. This LED bulkhead is a self-test emergency luminaire suitable for internal and external environments. It uses 6 high output LEDs with a moulded self-extinguishing polycarbonate base and fitted with a fresnel diffuser suitable for use on escape routes 850 degrees C Hot-wire test defined by ICEL.The diffuser is screw fixed and sealed by gasket to the base to provide IP65 protection. The gear tray is hinged and fully removable and cable entries are provided in the ends and base. This bulkhead can be fitted with a universal legend kit part no. ULK making it suitable for use as exit signs.Key FeaturesIP65PolycarbonateABS ConstructionClear Fresnel DiffuserRemovable Hinged Gear TrayExit SignsSelf-Test6 LEDsInternal ExternalPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 66.53

1

C-Tec QT606S Quantec Slave Overdoor Light with Sounder

C-Tec QT606S Quantec Slave Overdoor Light with SounderProvides audible and visual indication ofcalls made from a Quantec call point outside bedrooms WCs etc. Flash and sounderrates changeintensify to reflect the urgency of the incoming call.Key FeaturesDual red and green LEDs and triangular diffuser make it highly visible from a distance.Mounts on a standard UK 25mm single gang flush or surface back box.Finished in tough durable ABS plastic.Also available as part of the QT951 Accessible Toilet Alarm kit.

GBP 46.91

1

C-Tec NC806CSS Conventional Stainless Steel Overdoor Light

C-Tec NC806CSS Conventional Stainless Steel Overdoor LightThe NC806CSS provides visual indication of 800 Series Alarm calls outside bedrooms WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant red light and Emergency calls via a pulsing red light.Key FeaturesDual red LEDs and triangular diffuser make it highly visible from a distanceMounts on a standard UK 25mm single gang flush or surface back boxCan also be used as an area indicator at corridor junctions staff workstations etcFinished in brushed stainless-steel finish

GBP 84.64

1

C-Tec QT606ALP Quantec Addressable Overdoor Light With Sounder Flat Plate Anti Ligature

C-Tec QT606ALP Quantec Addressable Overdoor Light With SounderFlat Plate Anti LigatureAn addressable overdoor light sounder designed toincrease call indication levels in large Quantec sites. Can be programmed toilluminate and sound when certain groups of call points are calling. Ideal forproviding area indication or follow me lights at the ends of corridors etc Key FeaturesFlash and sounder rates changeintensify to reflect theurgency of incoming callsAdjustable volume controlDual red and green LEDs and triangular diffuser make it highlyvisible from a distanceMounts on a standard UK 25mm single gang flush or surfaceback boxFinished in tough durable ABS plastic

GBP 61.36

1

C-Tec QT606A Quantec Addressable Overdoor Light with Sounder

C-Tec QT606A Quantec Addressable Overdoor Light with SounderAn addressable overdoor light sounder designed to increase call indication levels in large Quantec sites.Can be programmed to illuminate and sound when certain groups of call points are calling. Ideal for providing area indication or follow me lights at the ends of corridors etcKey FeaturesFlash and sounderrates changeintensify to reflect the urgency of incoming calls.Adjustable volume control.Dual red and green LEDs and triangular diffuser make it highly visible from a distance.Mounts on a standard UK 25mm single gang flush or surface back box.Finished in tough durable ABS plastic.

GBP 57.24

1

C-Tec NC806CSSS Conventional Stainless Steel Overdoor Light amp Sounder

C-Tec NC806CSSS Conventional Stainless Steel Overdoor Light SounderThe NC806CSSS provides audible and visual indication of 800 Series Alarm calls outside bedrooms WCs and any other area fitted with an 800 Series calling device. Indicates Standard calls via a constant toneconstant red light and Emergency calls via a pulsing tonepulsing red light.Key FeaturesDual red LEDs and triangular diffuser make it highly visible from a distanceMounts on a standard UK 25mm single gang flush or surface back boxCan also be used as an area indicator at corridor junctions staff workstations etcFinished in a brushed stainless-steel finish

GBP 67.24

1

X-ERS LED 230v Mains Square Weatherproof Luminaire

X-ERS LED 230v Mains Square Weatherproof LuminaireA quality decorative luminaire designed for use by architects and designers. Comprising of a moulded self-extinguishing polycarbonate base fitted with a clear diffuser suitable for use on escape routes. The X-ERS Light offers a cost-effective emergency lighting and mains lighting combination and is ideal for areas where higher light levels are required.Key FeaturesHigh lumen outputLow power consumption4000k Colour temperatureIP65DALI and Self-Test optionsCentral Battery and Static inverter systemsBlack base finish optionPlease Note although listed under Emergency Lighting this product is not an emergency light and should not be used as one. The product is only for use as a standard light fitting.

GBP 87.05

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)