entrepreneurship in theory and practice from GBP 3 | See the cheapest prices and offers on css.lazzaweb.dk

Advanced 20-DLVMX100-BX Dual Isolator In Mounting Box

Advanced 20-DLVMX100-BX Dual Isolator In Mounting BoxThe dual boxed isolator module is designed to provide protection against short circuits and faults in flats and apartments. The unit operates with the EvacGo control panel to provide high rates of information exchange in combination with particular features that ensure fast and secure responses.Key FeaturesDesigned to operate with EvacGo control panelsPassive device does not need to be addressedIsolates the adjacent loop section where the short circuit occurredAll functions of devices situated on opposite loops section of the module are unaffectedRestores power to the isolated loop section when short circuit is removedDesigned to comply with the BS 8629 Code of Practice

GBP 107.58

1

Zeta MKII-ISO Isolator Base and Cover

Zeta MKII-ISO Isolator Base and CoverThe MKII-ISO is an Isolator Base and Cover.There are 6 different detector bases available for the addressable range of detectors namely common base isolator base and addressable relay base.The Isolator base is used to protect the loop against short circuits. They should be used at least every 32 devices but it is better practice to use them at the end of every zone.

GBP 16.15

1

Advanced 20-LVMX100-BX Single Isolator In Mounting Box

Advanced 20-LVMX100-BX Single Isolator In Mounting BoxThe single boxed isolator module is designed to provide protection against short circuits and faults in flats and apartments in single floor evacuation zones. The unit operates with the EvacGo control panel to provide high rates of information exchange in combination with particular features that ensure fast and secure responses.Key FeaturesDesigned to operate with EvacGo control panelsPassive device does not need to be addressedIsolates the adjacent loop section where the short circuit occurredAll functions of devices situated on opposite loops section of the module are unaffectedRestores power to the isolated loop section when short circuit is removedDesigned to comply with the BS 8629 Code of Practice

GBP 72.38

1

Morley IAS MI-DRS-1 Door Release Module and System BS7273-4

Morley IAS MI-DRS-1 Door Release Module and System BS7273-4BS7273 part 4 2007 is the code of practice governing door holders and door release mechanisms. The Morley-IAS door release system offers a compliant solution to meet the requirements of section 5 of BS7273-4 Category A installations.The DRM-1 module has been designed for use in conjunction with the existing output module and wider fire system to meet the requirements of section 5 of BS7273-4 Category A installations. The MI-DRS-1 compromises of a door release module and single input which has been prewired and mounted into a surface mounting box.Key FeaturesAdditional failsafe mechanism to meet the code of practice requirements of BS7273-4 section 5.Visual indication of loop power status loop communication and activation statusStandalone module available for retrofit DRM-1Door release system package MI-DRS-1 available for new installationsDual time delay settings in line with BS- 7273-4Additional volt free relayDin rail mountableCompatible with Morley-IAS module enclosure rangeConsistent design with other Morley-IAS modules

GBP 255.32

1

RGL Electronics KPX1000 InternalExternal Keypad With Built In Proximity Facility - Surface Mount

RGL Electronics KPX1000 InternalExternal Keypad With Built In Proximity Facility - Surface MountThe KPX1000 Digital Keypad with Proximity Reader is suitable for access control situations where single or double door entry is to be restricted. The keypad complies with relevant EN30133 and industry codes of practice. This proximity reader and keypad is suitable for external use when used with a rain shield.Key FeaturesBuilt in proximity readerUses EM cards or fobsKeypad or proximity2 Open door modesInternalExternal use only if fitted with Rain shield12VDCSelectable backlit featureLock and Aux outputs500 unique usersPCB formal coatedStylish designAudio key operationDoor bell facilitySingle or dual modes using Aux outputIndividually programmable outputsAdjustable output timers on both Lock and AuxZinc alloy electroplated casingSurface mounted

GBP 73.88

1

RGL Electronics KPX2000 InternalExternal Keypad With Built In Proximity Facility - Surface Mount

RGL Electronics KPX2000 InternalExternal Keypad With Built In Proximity Facility - Surface MountThe KPX2000 Digital Keypad with Proximity Reader is suitable for access control situations where single or double door entry is to be restricted. The keypad complies with relevant EN30133 and industry codes of practice. This proximity reader and keypad is suitable for external use when used with a rain shield.Key FeaturesBuilt in proximity readerUses EM cards or fobsKeypad or proximity2 Open door modesInternalExternal use only if fitted with Rain shield12VDCSelectable backlit featureLock and Aux outputs500 unique usersPCB formal coatedStylish designAudio key operationDoor bell facilitySingle or dual modes using Aux outputIndividually programmable outputsAdjustable output timers on both Lock and AuxZinc alloy electroplated casingSurface mounted

GBP 81.92

1

Carrier 360FM Bracket For Flush Mounting EV600 And DD600 Series In Ceiling Tile

Carrier 360FM Bracket For Flush Mounting EV600 And DD600 Series In Ceiling TileThe EV600 and DD600 motion sensors can be flush mounted with the optional accessory 360FM. The 360FM ensures a neat integration in the ceiling making only the top part of the sensor visible.

GBP 5.90

1

Aritech ATS1870 USB Card Learn-in Reader For Hitag And Mifare CSN 47 Byte

Aritech ATS1870 USB Card Learn-in Reader For Hitag And Mifare CSN 47 ByteThe versatile reader combines support for Hitag2 and Mifare CSN cards in combination with ATS8600 Advisor Management or the ATS85xx Downloaders. The USB reader provides for an easy method to add cards into the security system as well as support the simultaneous use of Hitag2 and Mifare CSN.Key FeaturesSupport card learning for ATS8600 and ATS85xx DownloadersSupports Mifare CSN in 4 and 7 byte with adjustment to 48 bit optionSupports Hitag2 UID cardsFour ID badge configurations 3 are pre-set all four are user definableSelect options through small applicationFrequency 125 kHz max power -13 dBmFrequency 13.56 MHz max power -27 dBm

GBP 331.61

1

Gent VS-IDOOR-PLUS Replacement Inner Door for VIGPLUS-24 and VIGPLUS-72 Supplied in Black

Gent VS-IDOOR-PLUS Replacement Inner Door for VIGPLUS-24 and VIGPLUS-72 Supplied in BlackThe VS-IDOOR-PLUS is a replacement Inner Door for VIGPLUS-24 and VIGPLUS-72.Key FeaturesSupplied in Black

GBP 1368.20

1

Aritech GS960-TR GS960 Tester And Calibration Tool For Optimal Functioning Of The Sensor In The Acoustic Space

Aritech GS960-TR GS960 Tester And Calibration Tool For Optimal Functioning Of The Sensor In The Acoustic SpaceThe GS960-TR tester is a specially developed tool for calibrating and adjusting the GS960 Series for optimal function in the acoustic space the DRC Digital Room Compensation procedure. Using this tool to test the detector settings you do not need to open it again as the tester will communicate with the detector acoustically.

GBP 209.59

1

Morley MCP5A-RP02FF-01-B Manual Call Point With Flexible Element Built-In Isolator and Mounting Box

Please note The price of this product including the base is a special promotional project offer directly from the manufacturer.Morley MCP5A-RP02FF-01-B Manual Call Point With Flexible ElementBuilt-In Isolator and Mounting BoxInstallation efficiency flexibility and full compliancewith the latest standards are at the heart of the new MCP Indoor Call Pointrange.Installation time and ultimately cost are of paramountimportance to any fire or security installer. The MCP range directly reflectsthis need by providing a unique plug and play concept designed specificallyto reduce installation time. All new MCP products utilise a special terminalblock where all initial installation cabling is terminated. This terminal blockis then simply connected to the back of the MCP. Simple but effective with no re-terminationrequired and no time wasted.Through new standards and legislation both break glass andresettable operating elements can now be used within a manual call point. Toprovide you with the greatest flex-ability the new MCP range can beconfigured as either a break glass or resettable unit by simply changing fromone element to another. No other additional parts or alternative products needto be ordered.All MCP Indoor Call Point products also help preserve theintegrity of the overall system as illegal removal of the product lid willresult in the call point operating and the system going in to alarm.Key FeaturesComes with SR1T mounting box for surface mountingAddressableFlexible element

GBP 36.29

1

Hochiki Ekho EK-WL8-OV Hybrid Wireless Optical Smoke Sensor with Built in Voice Alarm and VAD

Hochiki Ekho EK-WL8-OV Hybrid Wireless Optical Smoke Sensor with Built in Voice Alarm and VADThe EK-WL8-OV is a wireless optical smoke sensor that incorporates a voice sounder and visual alarm device VAD with white LEDs and 0.5 Hz flash rate.The sensor utilises optical smoke detection technologies and algorithms for improved performance which can contribute to reducing unwanted alarms.Utilising well-proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability are achieved.Key FeaturesApproved to EN54-3 7 23 25RED compliantVoice Sounder and VAD IncorporatedInternal algorithm processing for optimal performanceTamper switchUp to 10 years battery lifeUtilises standard low cost lithium battery technologyBi-directional wireless communicationsSelf-optimising wireless amplitude and frequencyDesigned for use with Ekho TranslatorExpander modules

GBP 297.24

1

Crowcon C01841 Flow Plate and Gasket

Crowcon C01841 Flow Plate and GasketA flow plate and gasket.Crowcon a leading pioneer in personal gas monitoring technology provides an extensive selection of customisable options in their gas detectors. These advanced devices have been refined over many years of worldwide expertise making them exceptionally well-suited for diverse industrial and challenging environmental conditions.

GBP 43.68

1

Howler SHR08 SafetyHub Fire and Spill Point cw Cabinet Spill Module Signage and Alarm Backboard Excludes Alarm and Spill Kit

Howler SHR08 SafetyHub Fire and Spill Point cw Cabinet Spill Module Signage and Alarm Backboard Excludes Alarm and Spill KitRaising the alert quickly in the event of a fire and having the appropriate equipment on hand to deal with it remains of utmost importance on every construction site. Be prepared and be proactive The SafetyHub FirePost sets the standard for effective site fire safety.ULTRA-TOUGH it stands out and stands upTIDY all the kit is in one neat unitPROTECTED ensures the equipment is always readyCOMPATIBLE with all Howler alarm systemsKey FeaturesRed lockable extinguisher cabinetSpill canister for the storage of spill kitYellow signage backboard and statutory signage including fire action notice as shownFits any extinguisher type and sizeCompatible with any Howler fire alarm unitPlease note Additional shipping charges apply to this product.

GBP 1100.06

1

Testifire 6001-001 Smoke and Heat Detector Test and Removal Kit - 6 Metres 20 Feet

Testifire 6001-001 Smoke and Heat Detector Test and Removal Kit - 6 Metres 20 FeetNow Including High Capacity Battery BatonsTestifire 1000 Series is the worlds first multi-stimulus detector tester for smoke heat and multi-stimulus detectors. Both smoke and heat stimuli are created in a single test unit and delivered individually or - for the first time - simultaneously in whichever combination are required.Testifire does this without using pressurised cans of gas or other hazardous goods. Stimuli Smoke and Heat are generated at the time of test using safe and patented processes fuelled by replaceable capsules.The new SOLO770 Battery Baton is a higher capacity product 3000mAh. It allows greater efficiency both in the field and on-site as it gives more tests per battery for the same charge time as before but provided by the new SOLO727 Battery Charger.The SOLO727 charger has also been improved and while it provides the same functionality as before it is now capable of enabling fast charging of the new higher capacity battery batons from both mains power and in-vehicle outlets.Features BenefitsTesting with one tool is faster and more productiveLess tools and equipment to carry aroundAllows testing and removal of detectors up to 6 metres 20 feet in heightCombined stimuli delivers quicker activation times for combination detectorsUnique Clearing Cycle provides rapid detector reset with no repeat alarmsTest times reduced by as much as 66 saving labourFully reverse compatible with the Solo range of poles battery batons and chargers.Ideal in any application Land Air and MarineA must have addition to any Professional Engineers Tool SuiteReduced carriage and shipping costs - no pressurised cans of gasReduced Test Stimuli Re-stocking and freight costs - no pressurised cans of gasTestifire 6001 - 001 Smoke and Heat Detector Testing and Removal Kit Includes1 x Testifire 1000-001 Head Unit inside the 1000-001 box it will also include 1 x TS3-001 Smoke Capsule 1 x Solo 770-001 Battery Baton option to buy second baton in the drop-down box and 1 x Solo 727-001 Multi Voltage Fast Charger1 x Solo 100-001 Fibreglass Telescopic Access Pole 4.5 metres 15 feet1 x Solo 200-001 Universal Detector Removal Tool1 x Solo 610-001 Protective Carrying Storage Bag

GBP 2208.17

1

SAS NET205PC Patient Call Unit with Magnetic Reset and Alarm and Crash Call

SAS NET205PC Patient Call Unit with Magnetic Reset and Alarm and Crash CallThe NET205PC is a Patient Call Unit with Magnetic Reset and Alarm and Crash Call.The Nursecall System helps patients and staff to relax in the knowledge that should help be required either by the patient or by a member of staff assistance can be directed to the specific room at the touch of a button.

GBP 136.90

1

Nitrogen Regulator and Hose NRH

Nitrogen Regulator and Hose NRHThe nitrogen regulator and hose are an essential piece of equipment for all fire extinguisher engineers. When used in conjunction with the adapter set the nitrogen regulator is used for the pressurising of fire extinguishers.Key FeaturesTo be used in conjunction with the fire extinguisher adapter kitAllows for fire extinguishers to be re-pressurisedThe valve assembly is made from high quality solid brassEasy to useAn essential piece of fire extinguisher engineer equipmentTested to 200 bar pressures25mm quick-fit adaptorComplete with a Schrader fitting and hose

GBP 350.18

1

Testifire 9001-001 Smoke and Heat Detector Test and Removal Kit - 9 Metres 30 ft

Testifire 9001-001 Smoke and Heat Detector Test and Removal Kit - 9 Metres 30 ftNow Including High Capacity Battery BatonsTestifire 1000 Series is the worlds first multi-stimulus detector tester for smoke heat and multi-stimulus detectors. Both smoke and heat stimuli are created in a single test unit and delivered individually or - for the first time - simultaneously in whichever combination are required.Testifire does this without using pressurised cans of gas or other hazardous goods. Stimuli Smoke and Heat are generated at the time of test using safe and patented processes fuelled by replaceable capsules.The new SOLO770 Battery Baton is a higher capacity product 3000mAh. It allows greater efficiency both in the field and on-site as it gives more tests per battery for the same charge time as before but provided by the new SOLO727 Battery Charger.The SOLO727 charger has also been improved and while it provides the same functionality as before it is now capable of enabling fast charging of the new higher capacity battery batons from both mains power and in-vehicle outlets.Features BenefitsTesting with one tool is faster and more productiveLess tools and equipment to carry aroundAllows testing and removal of detectors up to 9 metres 30 ft in heightCombined stimuli delivers quicker activation times for combination detectorsUnique Clearing Cycle provides rapid detector reset with no repeat alarmsTest times reduced by as much as 66 saving labourFully reverse compatible with the Solo range of poles battery batons and chargers.Ideal in any application Land Air and MarineA must have addition to any Professional Engineers Tool SuiteReduced carriage and shipping costs - no pressurised cans of gasReduced Test Stimuli Re-stocking and freight costs - no pressurised cans of gasTestifire 9001 - 001 Smoke and Heat Detector Testing and Removal Kit Includes1 x Testifire 1000-001 Head Unit inside the 1001-001 box it will also include1 x TS3-001 Smoke Capsule 1 x Solo 770-001 Battery Baton option to buy second baton in the drop-down box and 1 x Solo 727-001 Multi Voltage Fast Charger1 x Solo 100-001 Fibreglass Telescopic Access Pole 4.5 metres 15 ft3 x Solo 101-001 Fibreglass Extension Pole 1.13 metres 4 ft1 x Solo 200-001 Universal Detector Removal Tool1 x Solo 610-001 Protective Carrying Storage Bag

GBP 2511.41

1

Crowcon SS0700 Sensor Blank and Seal

Crowcon SS0700 Sensor Blank and SealA Sensor Blank and Seal.Crowcon specialises in providing gas detection solutions for various industries and applications. As part of their product offerings Crowcon also provides an extensive range of spare parts and accessories specifically designed for their gas detection systems.

GBP 21.38

1

Testifire 9201-001 Smoke Heat and CO Detector Test and Removal Kit - 9 Metres 30 ft

Testifire 9201-001 Smoke Heat and CO Detector Test and Removal Kit - 9 Metres 30 ftNow Including High Capacity Battery BatonsTestifire 2000 Series is the worlds first multi-stimulus detector tester for smoke heat and CO fire detectors. Smoke heat and CO stimuli are created in a single test unit and delivered individually or - for the first time - simultaneously in whichever combination are required.Testifire does this without using pressurised cans of gas or other hazardous goods. Stimuli Smoke Heat and CO are generated at the time of test using safe and patented processes fuelled by replaceable capsules.The new SOLO770 Battery Baton is a higher capacity product 3000mAh. It allows greater efficiency both in the field and on site as it gives more tests per battery for the same charge time as before but provided by the new SOLO727 Battery Charger.The SOLO727 charger has also been improved and while it provides the same functionality as before it is now capable of enabling fast charging of the new higher capacity battery batons from both mains power and in-vehicle outlets.Features BenefitsTesting with one tool is faster and more productiveLess tools and equipment to carry aroundAllows testing and removal of detectors up to 9 metres 30 ft in heightCombined stimuli delivers quicker activation times for combination detectorsUnique Clearing Cycle provides rapid detector reset with no repeat alarmsTest times reduced by as much as 66 saving labourFully reverse compatible with the Solo range of poles battery batons and chargers.Ideal in any application Land Air and MarineA must have addition to any Professional Engineers Tool SuiteReduced carriage and shipping costs - no pressurised cans of gasReduced Test Stimuli Re-stocking and freight costs - no pressurised cans of gasTestifire 9201 - 001 Smoke Heat and CO Detector Testing and Removal Kit Includes1 x Testifire 2000-001 Head Unit inside the 2001-001 box it will also include 1 x TS3-001 Smoke Capsule 1 x TC3-001 CO Capsule 1 x Solo 770-001 Battery Baton option to buy second baton in the drop-down box and 1 x Solo 727-001 Multi Voltage Fast Charger1 x Solo 100-001 Fibreglass Telescopic Access Pole 4.5 metres 15 ft3 x Solo 101-001 Fibreglass Extension Pole 1.13 metres 4 ft1 x Solo 200-001 Universal Detector Removal Tool1 x Solo 610-001 Protective Carrying Storage Bag

GBP 4123.44

1

Testifire 6201-001 Smoke Heat and CO Detector Test and Removal Kit - 6 Metres 20 ft

Testifire 6201-001 Smoke Heat and CO Detector Test and Removal Kit - 6 Metres 20 ftNow Including High Capacity Battery BatonsTestifire 2000 Series is the worlds first multi-stimulus detector tester for smoke heat and CO fire detectors. Smoke heat and CO stimuli are created in a single test unit and delivered individually or - for the first time - simultaneously in whichever combination are required.Testifire does this without using pressurised cans of gas or other hazardous goods. Stimuli Smoke Heat and CO are generated at the time of test using safe and patented processes fuelled by replaceable capsules.The new SOLO770 Battery Baton is a higher capacity product 3000mAh. It allows greater efficiency both in the field and on site as it gives more tests per battery for the same charge time as before but provided by the new SOLO727 Battery Charger.The SOLO727 charger has also been improved and while it provides the same functionality as before it is now capable of enabling fast charging of the new higher capacity battery batons from both mains power and in-vehicle outlets.Features BenefitsTesting with one tool is faster and more productiveLess tools and equipment to carry aroundAllows testing and removal of detectors up to 6 metres 20 ft in heightCombined stimuli delivers quicker activation times for combination detectorsUnique Clearing Cycle provides rapid detector reset with no repeat alarmsTest times reduced by as much as 66 saving labourFully reverse compatible with the Solo range of poles battery batons and chargers.Ideal in any application Land Air and MarineA must have addition to any Professional Engineers Tool SuiteReduced carriage and shipping costs - no pressurised cans of gasReduced Test Stimuli Re-stocking and freight costs - no pressurised cans of gasTestifire 6201 - 001 Smoke Heat and CO Detector Testing and Removal Kit Includes1 x Testifire 2000-001 Head Unit inside the 2001-001 box it will also include 1 x TS3-001 Smoke Capsule 1 x TC3-001 CO Capsule 1 x Solo 770-001 Battery Baton with option to buy a second in the drop down box above and 1 x Solo 727-001 Multi Voltage Fast Charger1 x Solo 100-001 Fibreglass Telescopic Access Pole 4.5 metres 15 ft1 x Solo 200-001 Universal Detector Removal Tool1 x Solo 610-001 Protective Carrying Storage Bag

GBP 3763.45

1

In Case of Fire - Vinyl 150mm x 150mm ICFV

In Case of Fire - Vinyl 150mm x 150mm ICFVAdvise staff and visitors what to do in the event of a fire within the building - provides specific details relevant to the building in question.Material Vinyl

GBP 3.37

1

In Case of Fire - Rigid 150mm x 150mm ICFR

In Case of Fire - Rigid 150mm x 150mm ICFRAdvise staff and visitors what to do in the event of a fire within the building - provides specific details relevant to the building in question.Material Rigid Plastic

GBP 6.66

1

Ziton 2010-CK ZP2 Key and Lock

Ziton 2010-CK ZP2 Key and LockReplacement key and lock arrangement for ZP2 control panels and repeaters large and small cabinets.Physical dimensions 102 x 32 x 154 mm W x H x DNet weight 59gMounting type In cabinet

GBP 20.47

1

Morley HLS-RES-5BUTHAND 5 Button Paging Transmitter In Enclosure

Morley HLS-RES-5BUTHAND 5 Button Paging Transmitter In EnclosureA 5 Button Paging Transmitter in enclosure.The Response Paging System offers the latest innovations in wireless paging and monitoring. Its a cost effective and flexible system that provides the ability to quickly respond to activated alarms.

GBP 857.12

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)