open circuits from GBP 1 | See the cheapest prices and offers on css.lazzaweb.dk

Zeta SCM-ACM Conventional Sounder Circuit Module - 2 Circuits

Zeta SCM-ACM Conventional Sounder Circuit Module - 2 CircuitsThe plug-in SCM-ACM module provides 2 Conventional sounder circuits for the Smart Connect Multiloop Panel. Each circuit has a 500mA output.The circuits are supervised for open circuit short circuit and earth fault conditions and will report this status back to the control panel.An additional feature that is included in the SCM-ACM module is that it has the ability to program a circuit as a 24v auxiliary output which can be used to provide power to external equipment.Key FeaturesCan be configured as an alarm output or a power output2 x output circuit 500mA eachExtensive front unit status indicationsQuick and easy to install by plugging the RJ45 cable into the module and control panel cable supplied with unitPower limited

GBP 161.52

1

Notifier PEARL IO Card for EN54-13 Compliant Sounder Circuits PRL-VDS

Notifier PEARL IO Card for EN54-13 Compliant Sounder Circuits PRL-VDSThe Notifier PRL-VDS is an input output card kit for use with the Notifier Pearl range of analogue addressable fire alarm control panels.This card is used for EN54-13 compliant sounder circuits fire routing interface fault routing interface and fire protection interface.

GBP 1024.55

1

Cooper EOLM-3 End of Line Module Bi-Wire Circuits Box of 8

Cooper EOLM-3 End of Line Module Bi-Wire Circuits Box of 8Each Zone on the panel that is configured for BiWire mode must have the intelligent end of line module EOLM-3 fitted to continually monitor each zone for the presence of fault conditions such as detector head removal open or short circuit and for end of line failures even when in a Fire condition.For new installations any Zone on the panel that is configured for Conventional mode can use the intelligent end of line module EOLM-3 to terminate the zone but the panel will be limited to only detecting the presence of open or short circuit conditions to make it backward compatible with the EOLM-1. All detector head removals will be seen as an open circuit condition. The EOLM-3 module can be placed into the base of the last manual call point or detector base.

GBP 44.06

1

Advanced QuickZone XL 8 Zone Control Panel with 2 Additional Sounder Circuits and Switched Relay

Advanced QuickZone XL 8 Zone Control Panel with 2 Additional Sounder Circuits and Switched Relay -QZXL-8HSQuickZone XL is up to 12 zone Conventional Twin Wire sav-wire control panel with integral power supply space for standby batteries. The panel continues the attributes of quality and reliability that is easy to install maintain and is simple to operate for the end user. Up to 12 fire zone circuits are provided plus two monitored sounder circuits. Fire and fault VFCO relays Fire Fault switched negative outputs class change and an alert input are also included.The fire zone outputs can be set as Twin Wire by DIL switch selection. The DIL switches are also used to allow Zone interface setting and Access to Level 3 mode. In Level 1 the panel will indicate if there are any faults Supply Fire System General repeater. As well as this the panel is capable of indicating zones in Fire Fault and disablements and delay status. Auxiliary Output and Sounder status will be shown including if the panel is in test mode.Controls enabled in Level 2 include Resound Silence and Reset. Disable and Test modes can also be established at this level as well as muting the internal buzzer and testing the functionality of all the LED indicators. In access Level 3 it is possible to select sounder resound options for zones EN54 requirement select Type A dependency per view and edit dependency functions as well as restore factory settings. The buzzer volume can also be set and the event log viewed. Two Additional monitored sounder outputs programmable switched negative outputs and one programmable relay available with high specification expansion card.Key Features4 to 12 ZonesTwin Wire selection by DIL switchFully approved to EN54-2 4Three year warranty as standardIntegral 3 Amp switch mode PSUClass Change Alert programmable inputsProgrammable relays and outputsTest Mode with or without soundersAlarm load of 2.4A shared across all sounder outputsModular expansion zone cards available2 Additional sounder circuits with high spec expansion cardFully functional repeater panelsCan support up to 8 repeater panelsKey-switch or code entry for activation of controlsSpace for up to 7.0Ah batteriesTwo monitored sounder circuits fitted as standardIntegral detector removal monitoring

GBP 636.84

1

Advanced QZXL-12HS QuickZone 12 Zone Control Panel with 2x Sounder Circuits and Switched Relay

Advanced QZXL-12HS QuickZone 12 Zone Control Panel with 2x Sounder Circuits and Switched RelayQuickZone XL is up to 12 zone Conventional Twin Wire sav-wire control panel with integral power supply space for standby batteries. The panel continues the attributes of quality and reliability that is easy to install maintain and is simple to operate for the end user. Up to 12 fire zone circuits are provided plus two monitored sounder circuits. Fire and fault VFCO relays Fire Fault switched negative outputs class change and an alert input are also included.The fire zone outputs can be set as Twin Wire by DIL switch selection. The DIL switches are also used to allow Zone interface setting and Access to Level 3 mode. In Level 1 the panel will indicate if there are any faults Supply Fire System General repeater. As well as this the panel is capable of indicating zones in Fire Fault and disablements and delay status. Auxiliary Output and Sounder status will be shown including if the panel is in test mode.Controls enabled in Level 2 include Resound Silence and Reset. Disable and Test modes can also be established at this level as well as muting the internal buzzer and testing the functionality of all the LED indicators. In access Level 3 it is possible to select sounder resound options for zones EN54 requirement select Type A dependency per view and edit dependency functions as well as restore factory settings. The buzzer volume can also be set and the event log viewed. Two Additional monitored sounder outputs programmable switched negative outputs and one programmable relay available with high specification expansion card.Key Features4 to 12 ZonesTwin Wire selection by DIL switchFully approved to EN54-2 4Three year warranty as standardIntegral 3 Amp switch mode PSUClass Change Alert programmable inputsProgrammable relays and outputsTest Mode with or without soundersAlarm load of 2.4A shared across all sounder outputsModular expansion zone cards available2 Additional sounder circuits with high spec expansion cardFully functional repeater panelsCan support up to 8 repeater panelsKey-switch or code entry for activation of controlsSpace for up to 7.0Ah batteriesTwo monitored sounder circuits fitted as standardIntegral detector removal monitoring

GBP 799.87

1

Zeta SCM-ZMM Conventional Zone Monitor - 6 Circuits

Zeta SCM-ZMM Conventional Zone Monitor - 6 CircuitsThe SCM-ZMM is a six zone monitor module that is designed to be DIN mounted inside of a Smart Connect Multiloop control panel. Its powered and interfaced to the panel via a RJ45 connection.The module has six conventional zones which can be typically used for conventional devices andor for special detectors that are not available in addressable form such as UV detectors aspiration and beam detectors etc.The module monitors and transmits the status normal open short or alarm of a zone with the detectors to a control panel. Each zone input can be programmed to either give an Alarm signal or a technical alarm signal when active. The SCM-ZMM is a six zone monitor module that is designed to be DIN mounted inside of a Smart Connect Multiloop control panel. Its powered and interfaced to the panel via a RJ45 connection.The module has six conventional zones which can be typically used for conventional devices andor for special detectors that are not available in addressable form such as UV detectors aspiration and beam detectors etc. The module monitors and transmits the status normal open short or alarm of a zone with the detectors to a control panel. Each zone input can be programmed to either give an Alarm signal or a technical alarm signal when active.Key FeaturesDesigned to EN54 Part 26 x Conventional ZonesEach zone is monitored for open short circuitExtensive front unit status indicationsQuick and easy to install by plugging the RJ45 cable into the module and control panel cable supplied with unitEach zone input can be configured as either Alarm or Technical Alarm

GBP 182.12

1

EOLM-1 JSB End Of Line Module Conventional Circuits

EOLM-1 JSB End Of Line Module Conventional CircuitsEach Zone on the panel that is configured for Standard Conventional mode must have the intelligent end of line module EOLM-1 fitted to continually monitor each zone for the presence of fault conditions such as detector head removal open or short circuit and for end of line failures even when in a Fire condition. The EOLM-1 module can be placed into the base of the last manual call point or detector base.

GBP 5.51

1

Fireclass 517.001.301FC MTL7728 Zener Safety Barrier for Conventional Detection Circuits

Fireclass 517.001.301FC MTL7728 Zener Safety Barrier for Conventional Detection CircuitsThe MTL7728 is an intrinsically safe zone-powered Zener-diode barrier for use in conventional fire detection systems for protection within hazardous areas.Each Zone contains two stages of pulse-tested Zener or forward- connected diodes and an infallible terminating resistor. In the event of an electrical fault in the safe area the diodes limit the voltage that can reach the hazardous area and the resistor limits the current. A fuse protects the diodes and the two stages of voltage limitation ensure continued safety if either stage should fail. No active output-current limiting circuits are employed.Model MTL7728 is certified ia for all zones and IIC for all explosive atmospheres.The MTL7700 Series intrinsically safe shunt-diode safety barriers are innovative devices designed to provide exceptionally high packing densities straightforward installation and simplified connection commissioning and maintenance facilities. The MTL7700 Series include secondary replaceable fuses. These are useful where there is the possibility of faults occurring during commissioning which would otherwise blow the barriers internal safety fuses.One secondary replaceable fuse for each barrier channel is provided and is lower in value than the safety related fuse. Fuses are packaged in small mouldings which can be latched in a disconnect position to break the safe and hazardous areas during commissioning maintenance and fault finding thus avoiding the need for additional disconnect terminals.Key FeaturesRemovable colour-coded terminalsBussed power feed to other modulesRelay and solid state switch modulesDual channel variants - 6.3mm per channelProximity detector inputsCompatible terminal numbering and safety descriptionsDimensions 105 x 90 x 12.6mmNumber of Channels 1Supply Voltage 28 V dcSafety Voltage Maximum 26 V dcSafety Current Resistance 300ohmSafety Current Maximum 93mASignal Type AnalogueMinimum Operating Temperature -20CMaximum Operating Temperature 65CHazardous Area Certification ATEXOperating Temperature Range Maximum of 65 C

GBP 77.08

1

FireClass FC410CIM Contact Input Module

FireClass FC410CIM Contact Input ModuleThe FC410CIM FC Addressable Contact Input Module is designed to monitor fire contacts such as extinguishing system control ventilation control fire door control etc. The FC410CIM can be configured asTwo spur circuits monitoring multiple normally open contacts with short circuit giving a fault output.Two spur circuits monitoring single normally closed contacts with short circuit giving a fault output.Key FeaturesMonitors fire contacts for safety systemsConfigurable as two spur circuitsSupports normally open and closed contactsShort circuit detection for fault outputIdeal for extinguishing and ventilation controlCompatible with fire door control systems

GBP 52.60

1

Advanced MxPro 5 MXP-536 P-BUS 8 Way Conventional Zone Card

Advanced MxPro 5 MXP-536 P-BUS 8 Way Conventional Zone CardThe Programmable 8-Zone Monitor Card is an optional peripheral unit that provides eight individually programmable zone monitor circuits compliant with BSEN54- 18 1998 Clause 7.8. Up to 16 cards can be connected to a multi-loop panel providing a maximum of up to 128 additional zone monitor circuits. Each zone is fully programmable using the powerful dynamic cause-and-effect rules. The unit is available as either a printed circuit card only.Applications LimitationsEN54-18 compliant zone monitor circuit.Key Features8 zone circuits - each zone is monitored for open and short circuitEach zone is individually programmable with the available dynamic cause-and-effect rulesUp to 16 cards can be connected giving a total of 128 additional zone monitors1 relay output for reset128 zone monitor circuits per panelEasily configured via PC-NET-0033 year warranty as standard

GBP 467.81

1

STI STI-1212 Open Back Spacer for Stopper Dome

STI STI-1212 Open Back Spacer for Stopper DomeAn Open Back Box for the Stopper Dome Series.

GBP 31.21

1

Commander 209P Turn Left To Open Photolumi 100 X 100

Commander 209P Turn Left To Open Photolumi 100 X 100A Turn Left To Open photoluminescent sign.Key FeaturesSize 100 x 100

GBP 1.94

1

Commander 210P Turn Right To Open Photolumi 100 X 100

Commander 210P Turn Right To Open Photolumi 100 X 100A Turn Left To Open photoluminescent sign.Key FeaturesSize 100 x 100

GBP 1.94

1

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APO

Apollo Intelligent Open Area Red Sounder Sonos - 55000-001APOThe Intelligent Open-Area Sounder has beendesigned for use in open areas and can be connected to any Discovery or XP95 system.Key Features Self-test fault monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of tonesIndividual and group addressingBuilt in isolatorRed or white optionsLoop-poweredIP65 rated

GBP 44.81

1

Turn To Open Clockwise - Rigid 100mm x 100mm TTOCR

Turn To Open Clockwise - Rigid 100mm x 100mm TTOCRThe Jewel Fire Group Rigid Turn to Open Clockwise sign is available to purchase directly from Acorn Fire. There are two different finishes available Rigid and Vinyl.

GBP 0.84

1

Turn To Open Clockwise - Vinyl 100mm x 100mm TTOCV

Turn To Open Clockwise - Vinyl 100mm x 100mm TTOCVThe Jewel Fire Group Vinyl Turn to Open Clockwise sign is available to purchase directly from Acorn Fire. There are two different finishes available Rigid and Vinyl.

GBP 0.76

1

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APO

Apollo Intelligent Red Open-Area Sounder Beacon - 55000-005APOThe Intelligent Open-Area Sounder Visual Indicator is designed for use in open areas and can be connected to an Apollo Discovery or XP95 system.Key Features Self-test monitoringChoice of tones on standard device Apollo Slow Whoop and DINTwo volume settings 92dBA and 100dBAIndividual and group addressingSynchronisation of tones and flashesBuilt in isolatorLoop-poweredIP65 ratedRed and clear lens options

GBP 69.17

1

Apollo Red Multi-Tone Weatherproof Open-Area Sounder - 55000-274APO

Apollo Red Multi-Tone Weatherproof Open-Area Sounder - 55000-274APOThe Weather-proof Multi-Tone Open-Area Sounder is designedfor use in open areas and can be connected to any Discovery or XP95 system.Key Features Updated to include choice of tones Apollo slow whoop and DINTwo volume settings 92dBA and 100dBASynchronisation of tonesIndividual and group addressingLoop PoweredRed or White optionsIP66 rated

GBP 144.16

1

Advanced MxPro 5 MXP-536F 8-Way Programmable Zone Monitor Card Fitted

Advanced MxPro 5 MXP-536F 8-Way Programmable Zone Monitor Card FittedThe Programmable 8-Zone Monitor Card is an optional peripheral unit that provides eight individually programmable zone monitor circuits compliant with BSEN54- 18 1998 Clause 7.8.Up to 16 cards can be connected to a multi-loop panel providing a maximum of up to 128 additional zone monitor circuits.Each zone is fully programmable using the powerful dynamic cause-and-effect rules.The unit is available as either a printed circuit card only.Applications LimitationsEN54-18 compliant zone monitor circuit.Key Features8 zone circuits - each zone is monitored for open and short circuitEach zone is individually programmable with the available dynamic cause-and-effect rulesUp to 16 cards can be connected giving a total of 128 additional zone monitors1 relay output for reset128 zone monitor circuits per panelEasily configured via PC-NET-0033 year warranty as standard

GBP 467.81

1

Turn To Open Anti-Clockwise - Vinyl 100mm x 100mm TTOAV

Turn To Open Anti-Clockwise - Vinyl 100mm x 100mm TTOAVThe Jewel Fire Group Vinyl Turn to Open Anti-Clockwise sign is available to purchase directly from Acorn Fire. There are two different finishes available Rigid and Vinyl.

GBP 0.76

1

Turn To Open Anti-Clockwise - Rigid 100mm x 100mm TTOAR

Turn To Open Anti-Clockwise - Rigid 100mm x 100mm TTOARThe Jewel Fire Group Rigid Turn to Open Anti-Clockwise sign is available to purchase directly from Acorn Fire. There are two different finishes available Rigid and Vinyl.

GBP 0.84

1

Apollo Intelligent Open-Area Red Beacon - 55000-009APO

Apollo Intelligent Open-Area Beacon - 55000-009APOThe Intelligent Open-Area Visual Indicatorhas been developed for use in situations where there is a risk that sounders will not be heard.Key Features For use with XP95 Discovery systemsSelf-test fault monitoringIP65 ratedIndividual and group addressingSynchronisation of flashesComes with Isolating Base as standardLoop-poweredRed and clear lens option

GBP 45.18

1

Apollo SA5501-320APO Open-Area VID White Body White Flash

Apollo SA5501-320APO Open-Area VID White Body WhiteFlashThe Intelligent Open-Area VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery and XP95 system.The Intelligent Open-Area VID includes features such asgroup individual control and status reporting all configured through the firecontrol panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorVariable flash rate 0.5 Hz or 1 HzAvailable in red or white flash

GBP 44.77

1

Apollo SA5501-321APO Open-Area VID White Body Red Flash

Apollo SA5501-321APO Open-Area VID White Body Red FlashThe Intelligent Open-Area VID is designed for use inopen-areas and can be connected to any CoreProtocol Discovery and XP95 system.The Intelligent Open-Area VID includes features such asgroup individual control and status reporting all configured through the firecontrol panel.AddressingThe Intelligent Open-Area VID responds to its own individualaddress which is set with the appropriate XPERT address card. Group address onCoreProtocol systems are set using the fire control panel.Key FeaturesSoftware defined group addressing with up to 16 group addressesBuilt-in controllable isolatorVariable flash rate 0.5 Hz or 1 HzAvailable in red or white flash