8 results (0,13840 seconds)

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Drayton Wiser Thermostat Kit 2

Drayton Wiser Thermostat Kit 1

Drayton Wiser Multi-zone Kit 2

Drayton Wiser Multi-zone Kit 1

DucoBox Connect MEV

DucoBox Connect MEV

DucoBox Connect MEV The DucoBox silent Connect is a high-quality demand controlled MEV unit that extracts continually from the kitchen and bathrooms to one central unit to provides a quiet and efficient ventilation system The difference between the DucoBox Silent Uk and DucoBox silent connect is that there is additional possibility to connect several additional features of Wall mounted Wired or RF Remote controls, Room sensors, Connectivity board allowing control via APP and the possible use of the optional commissioning App kit The unit does not come with any sensors and all options are at extra cost Demand controlled with optional internal humidity or Co2 box sensor that will automatically increase the speed to lower high humidity levels Manufactured in Belgium and developed with double wall construction to provide the quietist MEV available in Europe With a high performance of 400 m3/hr. this unit is ideally suited for high quality new builds or high-end renovations with up to 7 extract points The DucoBox silent has 7 x125mm connections and 1 x 125mm outlet With the optional Q-V adaptors this unit is also suitable with the use of up to 7 x 90mm crushproof radial ductwork connections with antibacterial lining that will lower the installation time and comply to the latest building control regulations BPC are MEV specialists and the original developers of MEV kits in the Uk and Ireland with lifetime technical support on our top-quality systems Key Features Suitable for up to 7 bathrooms Quietest MEV unit in Europe Powerful airflow rate of up to 400 m³/hour @ 150 Pa Sap Appendix Q (BRE) approved Low energy High performance DC fan SFP as low as 0.25 W.L.S. Optional C02 sensor Optional acoustic plus kit Only 4.3 kg in weight Slimline dimensions of 480x480x195mm 3 x Variable fan speeds 2+1 Year parts warranty* Optional 2 or 3 speed switch Suitable for wall or floor mounting Optional Humidity or CO2 box sensor Optional Wired / RF wall controller Optional App / BMS control Optional commissioning App kit Optional 7x 125 to 90 radial adaptors Optional fault indicator Optional laptop connection for commissioning Demand Controlled Ventilation Historically, MEV-units used to run continuously: 24 hours a day, 7 days a week. At a single set speed This was deemed to be “ok” so the energy losses were deemed to be small. DUCO feels that this “old school”-way-of-thinking is a thing of the past and decided to go a step beyond the “normal” operation mode of a “traditional” MEV system. DUCO offers true “on demand” solutions which result in true energetically optimised ventilation solutions: To only ventilate, when necessary, where it is necessary and as long as it is necessary! The DucoBox Silent has an internal humidity sensor that detects high humidity and increases the performance until the set level is reached again It is also possible to install a CO2 box sensor inside the DucoBox Silent UK With an “on demand” DUCO-system, the occupant can always be assured to breathe the best possible indoor air, whilst also using the least amount of energy! DUCO brings you the SMARTEST ventilation solutions!   External Control Components The DucoBox Silent Connect can be linked with the following external control components.   Box Sensors Box sensors can be installed very easily and quickly and provide CO2 and/or moisture measurement in an air duct. They are wired directly to the circuit board. This means that no wiring for room sensors need to be provided. A DucoBox Silent contains a maximum of two box sensors – one CO2 Box sensor and/or one Humidity Box Sensor – each of which can be clicked separately into a specific duct opening or together into one duct opening of the DucoBox. Smart Demand User controller There are 3 types of User controllers are available in either wireless or wired versions and in black or white face plates Remote control (popular option) Remote Control with CO2 sensor Remote control with Humidity Sensor The wired version will require the additional 24v Power supply Duco Connectivity Board The Duco Connectivity Board enables the Duco Installation App to be used on your phone or tablet This PCB also enables interfacing for home automation and building management systems via REST API (locally or via the cloud) or Modbus TCP (locally). Both possible via Ethernet and Wi-Fi. CO2 Room Sensors The CO2 Room sensor is available in either wireless or wired versions and with black or white face plates Switch

GBP 383.39
1

DucoBox Connect MEV with RH BOX Sensor

DucoBox Connect MEV with RH BOX Sensor

DucoBox Connect MEV The DucoBox silent Connect is a high-quality demand controlled MEV unit that extracts continually from the kitchen and bathrooms to one central unit to provides a quiet and efficient ventilation system The difference between the DucoBox Silent Uk and DucoBox silent connect is that there is additional possibility to connect several additional features of Wall mounted Wired or RF Remote controls, Room sensors, Connectivity board allowing control via APP and the possible use of the optional commissioning App kit The unit does not come with any sensors and all options are at extra cost Demand controlled with optional internal humidity or Co2 box sensor that will automatically increase the speed to lower high humidity levels Manufactured in Belgium and developed with double wall construction to provide the quietist MEV available in Europe With a high performance of 400 m3/hr. this unit is ideally suited for high quality new builds or high-end renovations with up to 7 extract points The DucoBox silent has 7 x125mm connections and 1 x 125mm outlet With the optional Q-V adaptors this unit is also suitable with the use of up to 7 x 90mm crushproof radial ductwork connections with antibacterial lining that will lower the installation time and comply to the latest building control regulations BPC are MEV specialists and the original developers of MEV kits in the Uk and Ireland with lifetime technical support on our top-quality systems Key Features Suitable for up to 7 bathrooms Quietest MEV unit in Europe Powerful airflow rate of up to 400 m³/hour @ 150 Pa Sap Appendix Q (BRE) approved Low energy High performance DC fan SFP as low as 0.25 W.L.S. Optional C02 sensor Optional acoustic plus kit Only 4.3 kg in weight Slimline dimensions of 480x480x195mm 3 x Variable fan speeds 2+1 Year parts warranty* Optional 2 or 3 speed switch Suitable for wall or floor mounting Optional Humidity or CO2 box sensor Optional Wired / RF wall controller Optional App / BMS control Optional commissioning App kit Optional 7x 125 to 90 radial adaptors Optional fault indicator Optional laptop connection for commissioning Demand Controlled Ventilation Historically, MEV-units used to run continuously: 24 hours a day, 7 days a week. At a single set speed This was deemed to be “ok” so the energy losses were deemed to be small. DUCO feels that this “old school”-way-of-thinking is a thing of the past and decided to go a step beyond the “normal” operation mode of a “traditional” MEV system. DUCO offers true “on demand” solutions which result in true energetically optimised ventilation solutions: To only ventilate, when necessary, where it is necessary and as long as it is necessary! The DucoBox Silent has an internal humidity sensor that detects high humidity and increases the performance until the set level is reached again It is also possible to install a CO2 box sensor inside the DucoBox Silent UK With an “on demand” DUCO-system, the occupant can always be assured to breathe the best possible indoor air, whilst also using the least amount of energy! DUCO brings you the SMARTEST ventilation solutions!   External Control Components The DucoBox Silent Connect can be linked with the following external control components.   Box Sensors Box sensors can be installed very easily and quickly and provide CO2 and/or moisture measurement in an air duct. They are wired directly to the circuit board. This means that no wiring for room sensors need to be provided. A DucoBox Silent contains a maximum of two box sensors – one CO2 Box sensor and/or one Humidity Box Sensor – each of which can be clicked separately into a specific duct opening or together into one duct opening of the DucoBox. Smart Demand User controller There are 3 types of User controllers are available in either wireless or wired versions and in black or white face plates Remote control (popular option) Remote Control with CO2 sensor Remote control with Humidity Sensor The wired version will require the additional 24v Power supply Duco Connectivity Board The Duco Connectivity Board enables the Duco Installation App to be used on your phone or tablet This PCB also enables interfacing for home automation and building management systems via REST API (locally or via the cloud) or Modbus TCP (locally). Both possible via Ethernet and Wi-Fi. CO2 Room Sensors The CO2 Room sensor is available in either wireless or wired versions and with black or white face plates Switch

GBP 420.31
1

BSK Zephyr Single Room Heat Recovery Unit

BSK Zephyr Single Room Heat Recovery Unit

Description With advanced features such as built-in Wi-Fi, remote control and app control, the BSK ZEPHYR V2 is a future-proof solution that offers functions that are otherwise only seen on much more expensive models. Manufactured in Turkey to a very high quality this unit is popular throughout Europe and as we have sold 1000s of these units, we can say that this is the best value single room unit available How does it work BSK Zephyr can recover heat by using a 2-way fan heating and cooling of the ceramic heat exchanger inside. The device operates on a cycle that extracts and supplies air in periods of 70 seconds. While the air is extracted out from the room, the ceramic heat exchanger will be heated, when the air flow direction is reversed and fresh air from outside is supplied to the room, thanks to the heat stored in the ceramic core, it will be blown inside in a conditioned manner. BSK Zephyr, whose power consumption does not exceed a few watts and can reach 90% thermal efficiency, also allows you to save energy while meeting your ventilation needs. You can connect multiple devices to each other via wi-fi, and you can control your devices with the included IR remote. BPC are MVHR specialists and the original developers of MVHR kits in the Uk and Ireland with lifetime technical support on our top-quality systems, Key Features – BSK Zephyr (v2) High heat recovery efficiency of up to 90%. App control via phone App (v2) IR handheld speed controller supplied with unit Wi-Fi pairing between and programming between units Internal humidity sensor 4 speed settings Delivers an airflow of 15 - 60m³ per hour (16 l/s), Suitable for areas up to 50m². Ultra Quiet energy efficient Motor 24-48 dBa Easy to service filters Ceramic heat recovery core Anti draft damper when not in use Optional External colored cowls available Optional Thin wall cowl available 24-month warranty Easy to install Detailed Info App Control It is now possible to control all the ZEPHYR devices and features in the house via a user-friendly app. Handheld IR controller The unit comes with an IR remote control that allows you to control all the features on the one unit or any other additional units simultaneously Wi-Fi Built-in Wi-Fi enables wireless pairing of multiple devices across your house, when paired devices will run either in parallel or in reverse depending on your setup. When the primary device is in ventilation mode, all parallel devices will also follow, while the reverse devices will be in exhaust mode. This way you can have continuous ventilation and aspiration and create air drafts inside or across rooms to increase the effectiveness of ventilation. You can set different settings and speeds for different rooms and create various ventilation zones. Humidity control Integral humidity sensor with 3 humidity monitoring levels. When a set humidity is reached, the device will enter exhaust mode to dispense excess humidity. Speed Control 4-speed settings from 15 m3/hr. to 60 m3/hr. including a night mode for silent operation 3 Ventilation Modes Set your unit up for any situation with a press of a button and will allow for either heat recovery of up to 90% or simply extract warm or humid air or even just supply fresh air in from outside Energy Use Unparalleled A+ rated 4-speed high-performance motor that uses as little as 1.2 watts of energy on night-time mode and only 6.3 watts on high boost Silent Operation True silent operation with an ultra-low 3.6 dBA on night-time mode and 27.3 dBA on high boost Heat Recovery The heat of the unit is a quality ceramic heat recovery core that provides long-term performance of up to 90% heat recovery Filters & Maintenance The system has been designed with extra quick and easy servicing of the two filters as the core and filters can be removed and cleaned without any tools or removing the outer covers Anti-draft During operation, the inner grille will open depending on the chosen airflow rate and if the unit is not being used the grille will close over with a foam seal Easy to install To provide a quiet and efficient unit the pipe diameter is 160mm and due to the new telescopic wall liner can be used as standard on walls from 250mm to

GBP 216.00
1