carbon styr racer from GBP 60 | See the cheapest prices and offers on css.lazzaweb.dk

Nuaire IAQ Carbon Filter Boxes

Nuaire IAQ Carbon Filter Box Product Part Number Nuaire IAQ Carbon Filter Box with no pre filter - IAQBOX-S Nuaire Carbon NOX Filter Box (PM2.5 pre-filter) - IAQBOX-S-PM2.5

GBP 1371.56

1

Vent Axia Lo-Carbon VA100 LT

Vent-Axia LO-CARBON VA100 LT Product Part Number Vent Axia VA100 LT - 251210 Description Lo-Carbon VA100 LT (Timer) Electronic adjustable overrun timer (5-30 minutes). Indication light. 2 speed options. Stock Ref. No: 251210 Long Life Ventilation VA100 The improved Vent-Axia Lo-Carbon VA100 range features Lo-Carbon long life DC motors that are more efficient than conventional motors whilst delivering up to 87% energy savings. Shutters The Vent-Axia Lo-Carbon VA100 range is fitted with a motorised shutter mechanism that uses no extra power in operation or off. Installation Fitted with integral protection against low energy lighting circuits, the VA100 is a 100mm axial fan suitable for use in the bathroom or toilet. VA100 is a quick and simple to fit product with easy-wire on one line terminals. Suitable for installation in window, walls or panels/ceilings at any angle using kits available. The 100mm telescopic wall kit fit walls 225 to 360mm thick.

GBP 59.60

4

Vent-Axia Lo-Carbon Heat Save

Vent-Axia Lo-Carbon Heat Save Product Part Number Vent-Axia Lo-Carbon Heat Save - 496036 Vent-Axia Wired Zone Control Panel - 496037 Description Through-The-Wall Heat recovery Unit The Vent-Axia Lo-Carbon Heat Save is a ventilation unit designed for living rooms and bedrooms in single and multi-family buildings. The unit is usually located in an exterior wall to provide new air to the room. The Vent-Axia Lo-Carbon Heat Save uses a reversible fan to extract dirty air from the room and replace it with outside air 70 seconds later. This air passes through a filter to ensure that clean air enters the room. These systems work best in pairs as when one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They are controlled by a SENWZP Sentinel wired zone controller which can operate up to 8 units in synchronization. This provides a single room or whole house balanced ventilation system with heat recovery. As well as filtering the air, the Vent-Axia Lo-Carbon Heat Save uses a thermal accumulator to extract warmth from the outgoing air and uses it to temper the incoming air to avoid the feeling of cold drafts and recover heat that would otherwise be lost to the outside. Typical Installation The Vent-Axia Lo-Carbon Heat Save can be fitted in a 180mm diameter hole. Maximum wall thickness is 460mm or 745mm with optional wall tube (see accessories). The wall sleeve length (included up to 460mm) can be cut down to size to fit any wall thickness. Vent-Axia Lo-Carbon Heat Save units work best in pairs. When one unit is extracting, the other can be supplying air to provide a balanced ventilation system. They alternate direction every 70 seconds when the thermal accumulator on the extract unit has warmed up allowing the supply air to benefit from these thermal gains. They are controlled by a SENWZP Sentinel wired zone controller. This is fully modular and controllable with customized ventilation profiles available so that every room in the home can have the perfect ventilation.

GBP 413.62

1

Vent Axia Lo-Carbon Quadra TP Kitchen/Bathroom fan

The Vent Axia Lo-Carbon Quadra Ventilation for any room Product Part Number Vent-Axia Lo-Carbon Quadra TP (Timer/Pullcord) - 439251 Description The Lo-Carbon Quadra TP offers a single fan suitable for surface or flush mounting. Low speed selectable between 6, 9 and 12l/s and high between 15, 30 and 60l/s all with through the wall or two ducted selections to ensure installed performance is met. It is also one of the most unobtrusive centrifugal kitchen fans available. The front cover design also provides no area for dirt to build up so it stays looking better for longer. Lo-Carbon Quadra SELV Designed to meet building requirements where there is a need to fit in Zone 1 containing a fixed bath or shower according to IEE wiring regulations. The Lo-Carbon Quadra SELV can be safely installed within the spray area with the 24VDC Safety Isolating Power Supply situated away from the spray zone and out of reach of the person using the facility. With discrete aesthetics and low noise levels due to an accurately balanced impeller. Key Features Meets current Building Regulations Approved Document F & L for intermittent or continuous use Recognised in SAP PCDB - Low SFP on PCDB 0.38 W/l/s 100mm circular spigot for easy installation and replacement of any existing fan - flush or surface mount Filterless technology and maintenance free Lo-Carbon motors offering 90% energy savings and long life Motor cassette cartridge for simple replacement Integral day-logger (option on SELV models) 5 Year Motor Guarantee IPX4 rated - IPX7 rated (SELV) Suitable for wall, ceiling and panel mounting Dimensions mm 230 x 260 x 112

GBP 218.40

3

Vent Axia Lo-Carbon Solo Plus P

Vent Axia LO-CARBON SOLO PLUS P Product Part Number Vent Axia Solo Plus P - 427477 Description Long Life Ventilation The Lo-Carbon Solo Plus range from Vent-Axia has been specially designed for through the wall and ducted applications, suitable for internal bathrooms, toilets and other small rooms. Finished in white, the Lo-Carbon Solo Plus can be flush or surface mounted, with a 2 position 100mm circular spigot for rear entry or connecting to a vertical ducting system. The powerful centrifugal impeller allows installations using 100mm ducting in straight runs, whilst still achieving 15l/s as required by Building Regulations Approved Document F. Continuous running products, such as the Lo-Carbon Solo Plus, installed in all wet areas of a dwelling are classed as a wholehouse ventilation system and therefore only need to move the amount of air as outlined in table 5.1a and 5.1b of Building Regulations Approved Document F. The Lo-Carbon Solo Plus has an adjustable boost speed which is set at installation variable between a wall or duct setting for boost/override operation to meet Building Regulations thus ensuring minimum energy usage and low sound levels. All models have an optional speed for constant trickle ventilation (12l/s), selectable at installation. Depending on the model, the fan will switch from trickle (if selected) to boost via the pullcord/light switch/humidity sensor/PIR. All models can be wall, panel or ceiling mounted and can be connected to either circular, rectangular or Vent-Axia’s flat ducting. Enclosure of the electrical components is manufactured from flame retardant grade material.

GBP 93.55

3

Vent Axia Lo-Carbon Pozidry Compact Pro

Vent Axia Lo-Carbon Pozidry Compact Pro Product Part Number Vent Axia Pozidry Pro Compact with Heater - 479188 Description The new Pozidry Compact Pro with integral heater now available! Technical Features 100mm duct connection Unit weight: 3kg Sound level @ 3m: 11.6-29.7 dB(A) Dimensions W x H x D: 393mm x 206mm x 200mm Removable inner cartridge for easy maintenance and repairs Filters - Washable, high capacity G4 or F7 filter Installation - Easy to install solution for mould and condensation in residential properties If the ambient temperature exceeds 27°C, the Lo-Carbon PoziDry Compact Pro will automatically switch off to prevent over-heating This temperature threshold can be adjusted at installation Models In the case of the integral 300W heater version, the heater element is automatically activated when necessary and tempers the supply air to a chosen temperature. Performance Speed FID (l/s) Power (W) No. Bedrooms Breakout dB(A) @ 3m 1 13 4.0 1 11.6 2 17 8.3 2 18.9 3 21 12.5 3 15.4 4

GBP 414.00

1

Vent Axia Lo-Carbon Sentinel Multivent

Vent Axia Lo-Carbon Sentinel Multivent The top of the range Sentinel Multivent continuous mechanical extract ventilation range is designed for the simultaneous extraction of up to several bathrooms/ Wet Rooms to a centrally positioned unit normally installed in the attic space Complete DIY Kit of a Vent Axia multiple room extraction unit with in insulated Flexible Ducting and fittings suitable for extraction of 4 separate areas Our Comprehensive DIY Kits have everything you should require to install the system to building control regulations Please note - You can purchase the MEV unit with or without the ductwork on this listing Key Unit Features Integral LCD display allows the installer to select appropriate low, normal and boost speeds to meet demand Energy efficient EC/DC motors - 1/3 less energy lost to heat than a conventional AC motor Ultra-quiet - acoustically lined for low noise levels Manual and automatic control options Integral adjustable overrun timer and delay on timer Option of wall, ceiling, and loft mounting Fully serviceable unit with all parts accessible PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels Technical Features Max Airflow of 450m3/h Best in class Specific Fan Power (SFP) as low as 0.16 wls Dimensions (mm) 340 long x 310 wide x 249 high Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Demand Control - enables precise ventilation rate, is set in 1% increments based on property size Plug-n-Play automatic sensor detection Switched live and SELV connections Dry Out setting – Option set at installation, Sentinel Multivent will run on boost for 1 week to assist in removing moisture Optional Wireless Control – up to 4 controllers on any one system Recognised in SAP Appendix Q Complies with Building ADF (System 3) Energy efficient EC/DC motors - 1/3 less energy lost to heat than a conventional AC motor 2-year standard or optional 5-year parts warranty Controllability Demand Control - enables precise ventilation rate, is set in 1% increments based on property size

GBP 487.87

1

Vent Axia Lo-Carbon Sentinel Kinetic Cooker Hood

Vent Axia Sentinel Kinetic heat recovery unit with Cooker Hood Product Part Number Vent Axia Kinetic CWH L (White Cooker Hood) - 446756 Description The Sentinel Kinetic Cooker Hood is designed to fit in a 600mm wide aperture above a hob. The telescopic hood incorporates two flat removable metal grease filters, low energy light bulbs and is available with a White or Brushed Aluminium front trim. The hood contains an integral fire damper in accordance with BRE Digest 398 and is connected to the heat recovery unit by a galvanised steel duct with access for cleaning. When the hood is opened, the heat recovery unit goes to boost speed and the summer bypass automatically opens to prevent cooking by-products entering the heat recovery cell. As an additional safety feature, the duct also contains a thermal cut-out fuse which turns off the MVHR unit in the event of excessive temperature in the airway. Cooker Hood units cannot be handed on-site and must be purchased as left hand (L) or right hand (R) models. The Lo-Carbon Sentinel Kinetic BH is the UKs bestselling heat recovery unit for people looking for a top quality unit at a realistic cost. Suitable for houses up to 150 m2 and meets the latest requirements of the Building Regulations ADF and ADL for whole house system ventilation. Filtration 2 x G4 with the option of a F7 pollen intake filter Controllability The Lo-Carbon Sentinel Kinetic models have 3 fully adjustable speeds and a purge setting (maximum flow). Provided with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range Boost can be achieved with almost any type of sensor or switch including momentary Integral Humidity Sensor The integral humidity sensor (models with H suffix) increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction The outer enclosure is constructed of PVC with the inner body being constructed of EPP Motors The unit has 2 x low energy, high efficiency EC/DC motors Installation Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after

GBP 2862.29

1

Vent Axia Lo-Carbon Multivent MVDC-MS unit

Vent Axia Lo-Carbon Multivent MVDC-MS Unit Product Part Number Vent Axia MVDC-MS - 437634 Key Features Variable speed settings Ultra-quiet - acoustically lined for low noise levels Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (H x W x D) 310mm x 360mm x 249mm Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Recognised in SAP Appendix Q Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live (LS) can also be used to select boost speed when wired through an Isolator Relay (Part No. 442030 - not supplied). An additional third speed (purge) is available using a second switched live connection. Isolator relay controller, Vent-Axia part number 442030

GBP 279.00

1

Vent Axia Lo-Carbon Multivent MVDC-MS

Vent Axia Lo-Carbon Multivent MVDC-MS - VMSMEVPK The Multivent continuous mechanical extract ventilation range is designed for the simultaneous extraction of up to several bathrooms/ Wet Rooms to a centrally positioned unit normally installed in the attic space Complete DIY Kit of a Vent Axia MVDS-MS multiple room extraction unit with insulated Flexible Ducting and fittings suitable for extraction of 7 separate areas Our Comprehensive DIY Kits have everything you should require installing the system to building control regulations Please note - You can purchase the MEV unit with or without the ductwork on this listing Key Features Vent Axia MVDC-MS multi room extraction unit Any products not required can be returned for full refund (excluding return delivery cost) Any extra products required will be discounted to the Kit Price (excluding delivery) Variable speed settings Ultra-quiet - acoustically lined for low noise levels Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels With a DC motor the Multispeed Multivent is one of the most efficient central extract units in the UK. The Multivent MVDC MS offers the option of ‘Close Control’ both in the residential and the commercial sectors. Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (H x W x D) 310mm x 360mm x 249mm Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Recognised in SAP Appendix Q Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live

GBP 288.00

1

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor

Vent Axia Lo-Carbon Multivent MVDC-MSH unit with Humidity Sensor Product Part Number Vent Axia MVDC-MSH - 443298 Key Features Internal Humidity sensor Ultra-quiet - acoustically lined for low noise levels Recognised in SAP Appendix Q Complies with Building ADF (System 3) Option of wall, ceiling, and loft mounting Improved controllability The unit has Long life, low energy multispeed DC motor Ceiling, wall, or floor Installation is recommended PVC outer casing with an acoustic lining is included as standard, ensuring minimum noise levels. Technical Features Max Airflow of 350m3/h Best in class Specific Fan Power (SFP) as low as 0.15 wls Dimensions (mm) 330 long x 391 wide x 248 high Fitted with four extract 125 or 100mm diameter spigots allowing quick connection to ducts Switched Live Boost connection Fully variable normal and boost speeds Fully serviceable unit with all parts accessible 2-year standard or optional 5-year parts warranty Controllability The potentiometer-controlled speed selector allows accurate setting of airflow The unit has 2 fully variable speeds for trickle and boost, with an inbuilt humidistat activation for the boost speed. A switched live (LS) can also be used to select boost speed when wired through an Isolator Relay (Part No. 442030 - not supplied). An additional third speed (purge) is available using a second switched live connection. MVDC-MS H (443298) the Boost setting is activated by the internal humidity sensor. The internal humidity sensor uses one of the two available LS inputs, the other remaining LS input can be used to switch the unit to Purge speed. MVDC-MS H has the option to switch from Normal to Boost speed (in effect over-riding the internal humidity sensor), this can be achieved by connecting an isolated switched live connection to the LS connection on the power supply terminal block. This must be isolated by using, for example an Isolator Relay Control, Vent-Axia part number 442030, or similar. Isolator relay controller, Vent-Axia part number 442030

GBP 204.00

1

Vent Axia Centra

Lo-Carbon Centra Lo-Carbon Centra has a specific fan power of only0.18 W/l/s in through-the-wall kitchen applications. Product Part Number 441782B Description The Lo-Carbon Centra meets the latest requirementsof the Building Regulations Approved Document Ffor wholehouse system ventilation.Selection of the two normal flow rates (6l/s or9l/s) is via a simple ‘jumper’ on the control board.Different methods are available for operatingboost speed from a simple switched live to integralhumidistat. See individual models for further details.The attractive and discreet styling of the Vent-AxiaLo-Carbon Centra will complement the décorof any new home while virtually silent operationensures optimum ventilation is achieved withoutintrusive noise. Key Features • Building Regulations ApprovedDocuments F and L compliant, System 3Continuous mechanical extract• Recognised in SAP Appendix Q- Low SFP on SAP Q• Quietest dMEV available• Discreet, tasteful styling• Single fan for use in all applications• IPX4 rated - IPX7 rated (SELV)• Pressure detection device• Normal and Boost speeds• Lo-Carbon motor offering 90% energysavings and long life• 5 Year Motor Guarantee• Suitable for wall, ceiling, panel andwindow mounting• SELV Models - Supplied with a remotetransformer• SELV Models Suitable for ‘Zone 1’installation Air Pressure Sensor Auto speed selection at installation. The integralair pressure sensor checks the airflow when firstinstalled and also helps the fan to compensate forexternal wind pressure. BPC Support We don’t sell boxes we provide a service that few can match Free Lifetime Technical support on purchased items Largest independent MVHR suppliers Lowest cost on full systems guarantees Inhouse design Team Inhouse certified training Largest rage and stock available Worldwide delivery options Solutions available from Value to prestige housing

GBP 112.32

1

Vent Axia Centra T

Lo-Carbon Centra T Ideal for bathroom and toilet applications, this unitruns continuously on trickle setting and may beboosted by the switched live input which activatesthe adjustable timer (5-30 minutes). Product Part Number 473825 Description The Lo-Carbon Centra meets the latest requirementsof the Building Regulations Approved Document Ffor wholehouse system ventilation.Selection of the two normal flow rates (6l/s or9l/s) is via a simple ‘jumper’ on the control board.Different methods are available for operatingboost speed from a simple switched live to integralhumidistat. See individual models for further details.The attractive and discreet styling of the Vent-AxiaLo-Carbon Centra will complement the décorof any new home while virtually silent operationensures optimum ventilation is achieved withoutintrusive noise. Key Features • Building Regulations ApprovedDocuments F and L compliant, System 3Continuous mechanical extract• Recognised in SAP Appendix Q- Low SFP on SAP Q• Quietest dMEV available• Discreet, tasteful styling• Single fan for use in all applications• IPX4 rated - IPX7 rated (SELV)• Pressure detection device• Normal and Boost speeds• Lo-Carbon motor offering 90% energysavings and long life• 5 Year Motor Guarantee• Suitable for wall, ceiling, panel andwindow mounting• SELV Models - Supplied with a remotetransformer• SELV Models Suitable for ‘Zone 1’installation BPC Support We don’t sell boxes we provide a service that few can match Free Lifetime Technical support on purchased items Largest independent MVHR suppliers Lowest cost on full systems guarantees Inhouse design Team Inhouse certified training Largest rage and stock available Worldwide delivery options Solutions available from Value to prestige housing

GBP 123.24

1

Vent Axia Centra HT

Lo-Carbon Centra HT (Humidistat/Timer) For bathroom/toilet applications, the continuousrunning HT model is automatically boosted by thebuilt-in humidistat or by a switched live input whichactivates the adjustable timer (5-30 minutes). Product Part Number 473827 Description The Lo-Carbon Centra meets the latest requirementsof the Building Regulations Approved Document Ffor wholehouse system ventilation.Selection of the two normal flow rates (6l/s or9l/s) is via a simple ‘jumper’ on the control board.Different methods are available for operatingboost speed from a simple switched live to integralhumidistat. See individual models for further details.The attractive and discreet styling of the Vent-AxiaLo-Carbon Centra will complement the décorof any new home while virtually silent operationensures optimum ventilation is achieved withoutintrusive noise. Key Features • Building Regulations ApprovedDocuments F and L compliant, System 3Continuous mechanical extract• Recognised in SAP Appendix Q- Low SFP on SAP Q• Quietest dMEV available• Discreet, tasteful styling• Single fan for use in all applications• IPX4 rated - IPX7 rated (SELV)• Pressure detection device• Normal and Boost speeds• Lo-Carbon motor offering 90% energysavings and long life• 5 Year Motor Guarantee• Suitable for wall, ceiling, panel andwindow mounting• SELV Models - Supplied with a remotetransformer• SELV Models Suitable for ‘Zone 1’installation BPC Support We don’t sell boxes we provide a service that few can match Free Lifetime Technical support on purchased items Largest independent MVHR suppliers Lowest cost on full systems guarantees Inhouse design Team Inhouse certified training Largest rage and stock available Worldwide delivery options Solutions available from Value to prestige housing

GBP 166.92

1

Nuaire Drimaster-ECO-NOX Loft Mounted PIV

Nuaire Drimaster-ECO-NOX Loft Mounted PIV Product Part Number Nuaire Drimaster-ECO-NOX-HC (In Home Controls with Carbon Filters) - DRI-ECO-NOX-HC Nuaire Drimaster-ECO-NOX-HEAT (In Home Controls RF enabled WITH HEATER & CARBON FILTERS) - DRI-ECO-NOX-HEAT Description Nuaire Drimaster-ECO-NOX-HC By utilising Nuaire’s market-leading Positive Input Ventilation (PIV) strategy as well as two carbon cartridges inside of each ePM10 filter, the Drimaster ECO NOX eliminates condensation dampness, filters out harmful pathogens and particulate matter, and reduces the NOX levels within the home by up to 80%. Nuaire Drimaster-ECO-NOX-HEAT This model has a 400W heating element fitted on the diffuser. Cost-effective and simple to install ventilation solution that has proven to significantly improve indoor air quality, creating a healthy and comfortable living environment. This integrated heater tempers the airflow should the temperature in the loft space drop below a set point, ensuring ultimate comfort in the home. If the loft temperature becomes excessive the unit will switch to standby mode (no airflow). Once installed, the airflow can be set to suit the house size and, if required, the way it responds to the temperature changes within. This unit also comes with a 7 segment display in the ceiling diffuser, offering complete control at the touch of a button without needing access to the unit located in the loft space. A lock function can be used to ensure the system remains tamper-proof.

GBP 763.98

1

Vent Axia Pozidry Pro

Vent Axia Pozidry Pro Product Part Number Vent Axia Pozidry Pro - 476310 All the Technical Things Selectable air capacities to suit floor areas up to 200m2 IPX2 rated Uses the latest lo-carbon motor technical for low running costs Ultra-low sound level Complete with ceiling diffuser, flexible duct, and worm drive clips Anti-vibration legs offer flexibility when fitting and guarantee silent running Flexible feet allow the unit to be installed across two joists or along a joist offering simple, easy installation Moulded handle makes carrying the unit safe and simple, allows you to change the pitch of the PIV if hanging kit is used Pozidry Pro is unique in offer F7 filters which filter down PM2.5 including diesel particulates Smart Sense technology is easy to set up with smart data logging capabilities all access via the intuitive 3 button menu This unit uses a sensor to monitor the temperature in the loft The Lo-Carbon PoziDry Pro features a specially developed Lo-Carbon DC fan/motor arrangement which runs quietly and delivers incredibly low running costs of less than £3 per year to run, the motor operating temperature is -25/40°c Performance The Lo-Carbon PoziDry pro uses a sensor to monitor the temperature in the loft, automatically adjusting the air volume when necessary. The unit will continuously ventilate silently in the background whilst in ‘Trickle’ mode. Once the unit automatically senses excess heat being lost into the loft the airflow will increase to ‘Normal’ mode to recover heat that would otherwise be lost through the roof. During summer months should the loft exceed 27°C the unit will enter ‘stand-by’ mode in order stop the circulation of warm air allowing for a more comfortable living environment. PoziDry Pro Heater models automatically turn on the 500W heater to boost air temperature by 10°C during colder months. Under assessment with BBA. Controllability The unit can be controlled by Smart Sense™ Technology – Easy set up and smart data logging capabilities all accessed via the intuitive 3 button menu on the unit Speed control selection is easy. Once house size is selected based on number of bedrooms, PoziDry Pro automatically selects the correct Trickle and Normal speeds. Should you need to adjust speed manually this can be done easily. Data Logger allows the unit to record how long it has been running in each of its speeds. It also measures the number of days the product has been switched on to provide precise running information. Smart Sense technology can also record the duration of heater activity and energy used Installation The Lo-Carbon PoziDry Pro is uniquely flexible in its

GBP 342.00

1

Flat Master Wall Mounted Positive Input Ventilation System

Product Part Number Standard Unit - FLATMASTER Description The Flatmaster solution has been specifically designed to ventilate homes without lofts and is recommended for planned and reactive ventilation servicing. Suitable as a social housing ventilation solution, the system introduces air into the home at a continuously low rate, eliminating condensation dampness and forcing out indoor pollutants such as Radon gas and carbon monoxide. Allergens are kept to a minimum and outdoor pollutants such as pollen and traffic fumes are kept out. The results are a fresh and healthy indoor environment.

GBP 329.99

1

Vent Axia Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit

Vent Axia Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit Product Part Number Sentinel Kinetic 200ZPH Horizontal Heat Recovery Unit - 407162 Description Vent Axia Sentinel Kinetic 200ZPH is a horizontal ceiling mounted whole house heat recovery system with up to 86% heat exchange efficiency. Specifically designed for new build constructions with a high level of insulation. The Lo-Carbon Sentinel Kinetic Horizontal 200ZPH meets the latest requirements of the Building Regulations ADF and ADL for whole house system ventilation: System 4 - Continuous mechanical supply and extract with heat recovery. Vent Axia 200ZPH is suitable for house sizes of up to 140m2 Filtration This unit requires 2 x G3 filter Controllability The Lo-Carbon Sentinel Kinetic Horizontal models have two fully adjustable speeds and a purge setting (maximum airflow). Supplied with the unit is a digital controller that can be used to pre-set the speeds to any required airflow within the performance range. Boost can be achieved with almost any type of sensor or switch including momentary. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and reducing noise. The sensor also reacts to small but rapid increases in humidity, even if the normal trigger threshold is not reached. This unique feature ensures adequate ventilation, even for the smallest wet room. The night time relative humidity setback feature suppresses nuisance tripping as humidity gradually increases with falling temperature Construction Constructed of galvanised steel and is fully insulated Motors The unit has 2 x low energy, high efficiency EC/DC motors Installation The Sentinel Kinetic Horizontal models designed to be horizontally mounted under a slab, with access for servicing and maintenance from below. When mounted in an unheated area ducting must be insulated. 200 ZPH models are 200mm deep, including condensate and mounting bracket. The Condensate drain is through the 'atmosphere' end of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation. Electrical and control connections are also made on the outside of the unit. Accessories In addition to a choice of compatible ducting systems a full range of controls, sensors, in-line silencers, floor/wall/ceiling inlet and outlet diffusers are available to complete the installation.

GBP 1915.20

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)