35 results (0,16197 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Gerband 586 Sealing Tape (60mm x 25m)

Gerband 586 Sealing Tape (60mm x 25m)

Gerband 586 Sealing Tape (60mm x 25m) Product Part Number Gerband 586 Sealing Tape (60mm x 25m) - GERBAND-586_60 Gerband 586 Sealing Tape (75mm x 25m) - GERBAND-586_75 Gerband 586 Sealing Tape (100mm x 25m) - GERBAND-586_100 Description Gerband 586 Airtight Tape offers permanent adhesion as well as a great ageing resistance. The elasticity in connection with the tear resistant thread reinforcement makes the Gerband 586 Airtight Tape universally suitable for achieving airtightness as well as sealing many different types of surfaces. It is both pliable and stretchable PE-film sealing tape with mositure resistant, polyacrylate adhesive of extremley high tack. Key Features Base material: LD-Polyethylene foil, stretchy green Adhesive: Acrylate dispersion, solvent free Adhesive middle layer: Polyester lattice layer Thickness (without covering): 0.28mm Covering Material: Silicon paper, brown Adhesive layer: 210g / m2 Adhesive strength: 35N / 25mm DIN EN 1939 Temperature Resistance: -40C to + 80C Uv Resistance: Max. 3 months Processing Temperature: Recommended from +5C to +40 Suitable Substrates Wood (Especially hard wood-based panel) Gypsum fibreboard Plasterboards Cement fibreboards Metals Hard Plastics & electric cables

GBP 14.69
1

90mm Pro Radial Pipe Connector

90mm Pro Radial Pipe Connector

Quiet-Vent Pro 75mm Duct Connector Product Part Number QV90-PRO-PF-CON Key Features The PRO connector is designed to connect two sections of 75mm Radial duct. It enables the use of remaining ends of ventilation ducts or extends a single duct. Built with CLICK system couplers featuring built-in gaskets and snaps for secure duct attachment. The dedicated PRO connector ensures quick and secure joining of two duct sections. No additional gaskets, clips, or tape are required for a tight connection.

GBP 7.20
1

75mm Pro Radial Pipe Connector

75mm Pro Radial Pipe Connector

Quiet-Vent Pro 75mm Duct Connector Product Part Number QV75-PRO-PF-CON Key Features The PRO connector is designed to connect two sections of 75mm Radial duct. It enables the use of remaining ends of ventilation ducts or extends a single duct. Built with CLICK system couplers featuring built-in gaskets and snaps for secure duct attachment. The dedicated PRO connector ensures quick and secure joining of two duct sections. No additional gaskets, clips, or tape are required for a tight connection.

GBP 7.20
1

Insulated Flexible Ducting x 10 meter Box

Insulated Flexible Ducting x 10 meter Box

Insulated Flexible Ducting x 10 meter Product Part Number 100mm Insulated flex duct - IFD100 125mm Insulated flex duct - IFD125 150mm Insulated flex duct - IFD150 160mm Insulated flex duct - IFD160 180mm Insulated flexi duct - IFD180 200mm Insulated flex duct - IFD200 250mm Insulated flex duct - IFD250 300mm Insulated flex duct - IFD300 350mm Insulated flex duct - IFD350 400mm Insulated flexi duct - IFD400 450mm Insulated flexi duct - IFD450 Description Flexible Aluminium inner core with silver foil faced 25mm glass wool insulation   The insulation reduces the heat gain or heat loss resulting from temperature different between the air flowing in a duct and the outer air 10 Meter long - compressed in box 1.2m long for transport 25mm insulation minimises condensation in cold attic spaces Can also be used for final connections or roof vents on heat recovery systems The outer jacket acts as vapour barrier to prevent condensation from entering the insulation 10 metre Insulated Round Hose, Aluminium insulated ducting hose in silver Suitable for both domestic and commercial use Installation Fully extend ducting, then cut to exact length required using a sharp knife and pliers. We recommend that joints be sealed on medium and high-pressure applications using Duct Sealant or Aluminium Duct Sealing Tape. Securely clamp the inner core first and then tape or clamp the outer jacket and inner core to the spigot. Taping the outer jacket to the spigot will prevent any fibre migration Compatibility This product is compatible with most manufactures including   102mm  127mm 152 182           202 Verplas  INS100X10 INS127X10

GBP 29.70
1

Metal T Piece

Metal T Piece

Metal T Piece Product Part Number 100mm T Piece - T100M 125mm T Piece - T125M 150mm T Piece - T150M 160mm T Piece - T160M 180mm T Piece - T180M 200mm T Piece - T200M Description Metal T piece, main trunk and single branch off in size of your choice, constructed of high quality durable galvanised metal All spigots are male and will fit inside galvanised spiral or other female fittings NOTE: Supplied without seals Made in the UK Perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans Can be used to connect long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufactures for galvanised metal ducting Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) should be insulated. The insulation needs to be

GBP 17.52
1

220x90mm - Double Airbrick with Grille - GPVC220

220x90mm - Double Airbrick with Grille - GPVC220

Double Airbrick with Grille - Double Airbrick Adaptor to fit 204mmx60mm or 220x90mm ducting systems - Comes with pre-fitted with two brown or white airbrick grilles - Specially designed to provide 90% free area supply and extract air vent in accordance with 2010 Domestic Ventilation Compliance Guide - Can be used in a bathroom, kitchen, ulility or part of whole house ducting systems Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. KEY FEATURES: UK Manufactured Easy to install and durable, just push-fit duct and fittings together Compatible with most other manufactures Extensive range of fittings, outlets, and grilles available Max / Min Temperature: +60c / -15c. DW/154 and meets UL94HB Flammability standard Suitable to use in compliance with Part F Building Regulations. Sap Appendix Q Compliant Airflow performance independently tested by BSRIA or BRE. Compatibility Can be used as part in 204x60mm or220x90mm ductwork systems with suppliers such as Verplas(VKC5733G), Vent Axia(449224), Manrose (60977). Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of Plastic Ducting Sealant and Aluminium Duct Sealing Tape Apply Duct sealant to the male fitting Push together Apply Aluminium Duct Sealing Tape over joint

GBP 11.20
1

Metal Female Duct Connector

Metal Female Duct Connector

Female Duct Metal Connector Product Part Number 100mm Duct Connector - C100FM 125mm Duct Connector - C125FM 150mm Duct Connector - C150FM 160mm Duct Connector - C160FM 180mm Duct Connector - C180FM 200mm Duct Connector - C200FM Description These connectors are constructed of high quality durable galvanised metal Female duct metal connectors are designed to join two male duct fittings together Manufactured in the UK, made without seals Designed for use with safe seal galvanised metal ducting but it can be used with equivalent standard metal ducting or some plastic ducting ranges Perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans Can be used to connect long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting  Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation

GBP 2.47
1

Metal 45° Bend

Metal 45° Bend

Metal 45° Bend Product Part Number 100mm Metal Bend - B45100M 125mm Metal Bend - B45125M 150mm Metal Bend - B45150M 160mm Metal Bend - B45160M 180mm Metal Bend - B45180M 200mm Metal Bend - B45200M Description 45° bend metal is constructed of galvanised metal and features 2  male spigots, which will fit inside flexible hose or round pipe. Best used with galvanised steel spiral ducting (round metal ducting - P100M-1). NOTE: Supplied without rubber seals Our metal ducting is manufactured in the UK with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Performance Galvanised metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or Aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength.  Compatibility  Compatible with most other lead manufacturers for galvanised metal ducting Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Insulation of Ductwork It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/ (m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space.

GBP 6.07
1

Metal Male Duct Connector

Metal Male Duct Connector

Metal Male Duct Connector Product Part Number 100mm Male Connector - C100MM 125mm Male Connector - C125MM 150mm Male Connector - C150MM 160mm Male Connector - C160MM 180mm Male Connector - C180MM 200mm Male Connector - C200MM Description Male fitting constructed of high quailty durable galvanised metal.  NOTE: Supplied without seals Made in the UK Perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans Can be used to connect long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of

GBP 2.40
1

Domus Flexible PVC Hose

Domus Flexible PVC Hose

Domus 100mm Flexible PVC Hose Product Part Number 100mm White Domus Flexible PVC Hose 3m - 363 125mm White Domus Flexible PVC Hose 3m - 563 150mm White Domus Flexible PVC Hose 3m - 663 Description Domus Ventilation Flexible Hose is a range of wire reinforced, flexible PVC ducting that has been specially designed for the ventilation market. The round profiles are compatible with the Domus Ventilation rigidPVC product range. The hose provides solutions to overcome situations where a rigid component cannot be installed. Flexible hose is particularly suitable for installation where there is slow moving air, such as, the ducting of tumble driers. Construction The Flexible Hose is constructed as a continuous left-hand helix (English wound) on a bespoke forming ‘head’. The reinforcing wire is 100% sealed inside a fold of PVC tape which is in turn overlapped by the next pitch. The joints are welded by hot air welding of the layers of PVC in order to produce a continuous sealed tube.

GBP 4.49
1

Rectangular Self Seal Coupling Duct to Duct

Rectangular Self Seal Coupling Duct to Duct

Rectangular Self Seal Coupling Duct to Duct Prouct Part Number 204x60mm Duct to Duct Coupling - VSS204DD 220x90mm Duct to Duct Coupling - VSSC220DD Description  204x60mm Self Seal Conn Duct to Duct - VSSC204DD Used to connect 204x60mm ducting to a 204x60mm ducting Zero air leakage No tape or sealant required Quick and easy to install Duct to fitting also available - VSSC204DF 22X90mm Self Seal Conn Duct to Duct - VSSC220DD Used to connect 220x90mm ducting to a 220x90mm fitting Zero air leakage No tape or sealant required Quick and easy to install Duct to fitting also available - VSSC220DF Our PVC ducting range is UK manufactured with high quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems Performance Solid Rigid ducting systems are suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations

GBP 9.73
1

Short Round to Rectangular Adaptor Female

Short Round to Rectangular Adaptor Female

110x54mm - Short Round to Rectangular Adaptor Female Product part Number Short Round Female Adaptor - AS110100 Description Adaptor for 100mm round female spigot to 110mm x 54mm rectangular duct pipe Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm Rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 110x54mm rectangular to 100mm

GBP 2.96
1

Quiet-Vent Round Metal Ducting

Quiet-Vent Round Metal Ducting

Quiet-Vent Ventilation Round Metal Ducting Product Part Number 100mm Metal Pipework x 1 meter - P100M-1 125mm Metal Pipework x 1 meter - P125M-1 150mm Metal Pipework x 1 meter - P150M-1 180mm Metal Pipework x 1 meter - P180M-1 200mm Metal Pipework x 1 meter - P200M-1 Description Galvanised spiral metal, available in different sizes, and available in 1-meter lengths. Duct length can be joined using Metal Male Duct Connectors. Compatibility Compatible with most other leading manufacturers for galvanised metal ducting. Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping the duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm Rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 100mm x 1 Meter Round Metal Ducting 125mm x 1 Meter Round Metal Ducting 150mm x 1 Meter Round Metal Ducting 180mm x 1 Meter Round Metal Ducting 200mm x 1 Meter Round Metal Ducting

GBP 8.06
1

Metal 90° Bend

Metal 90° Bend

Metal 90° Bend Product Part Number 100mm - B90100M 125mm - B90125M 150mm - B90150M 160mm - B90160M 180mm - B90180M 200mm - B90200M Description 90 degree galvanized metal elbow bend which uses 2 male spigots, which will fit inside round pipe or flexible hose. Best used with galvanised steel spiral ducting (round metal ducting - P100M-1). NOTE: Supplied without rubber Seals Our metal ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Performance Galvanised Metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength.  Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Insulation of Ductwork It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool

GBP 6.82
1

Rectangular Self Seal Coupling Duct to Fitting

Rectangular Self Seal Coupling Duct to Fitting

Rectangular Self Seal Coupling Duct to Fitting Product Part Number 204x60mm Duct to Fitting Coupling - VSSC204DF 220x90mm Duct to Fitting Coupling - VSSC220DF 204X60 Self Seal Conn Duct to Fitting - VSSC204DF Used to connect 204X60 mm ducting to a 204X60mm fitting Zero air leakage No tape or sealant required Quick and easy to install Duct to duct fitting also available - VSSC204DD 220X90mm Self Seal Conn Duct to Fitting - VSSC220DF Used to connect 220x90mm ducting to a 220x90mm fitting Zero air leakage No tape or sealant required Quick and easy to install Duct to duct fitting also available - VSSC220DD Description Our PVC ducting range is UK manufactured with high quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems. Performance Solid Rigid ducting systems are suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations

GBP 8.27
1

Quiet-Vent Metal 45o Pressed Bend with seals

Quiet-Vent Metal 45o Pressed Bend with seals

Quiet-Vent Metal 45° Bend With Seals Product Part Number 125mm - QV-B45125M 150mm - QV-B45150M 180mm - QV-B45180M Description Quiest-Vent 45° bend metal is constructed of galvanised metal, it uses 2 male spigots which will fit within flexible hose or round pipe. -Can be use with galvanised steel spiral ducting (round metal ducting - P100M-1) Our metal ducting is manufactured in the UK with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Performance Galvanised metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or Aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength.  Compatibility  Compatible with most other lead manufacturers for galvanised metal ducting Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Insulation of Ductwork It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/ (m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 125mm 150mm 180mm

GBP 6.16
1

Rectangular Ducting Elbow Bend(Fixed Spigot)

Rectangular Ducting Elbow Bend(Fixed Spigot)

Rectangular Ducting Elbow Bend (Spigot) Product Part Number 110x54mm Elbow Bend - S110 204x60mm - Fixed Spigot - SP204-125 204x60mm - Fixed Spigot - SP204-150 220x90mm - Fixed Spigot - SP220-125 220x90mm - Fixed Spigot - SP220-150 Description 90 degree elbow bend which converts rectangular PVC ducting to round PVC ducting in order to install a air valve or to convert to round pipe. Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems. Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of Plastic Ducting Sealant and Aluminium Duct Sealing Tape Apply Duct sealant to the pipe connections Push together Apply Aluminium Duct Sealing Tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations

GBP 2.66
1

Quiet-Vent Metal 90o Pressed Bend with seals

Quiet-Vent Metal 90o Pressed Bend with seals

Metal 90° Bend With Seals Product Part Number 125mm - QV-B90125M 150mm - QV-B90150M 180mm - QV-B90180M Description 90 degree galvanized metal elbow bend. Uses 2 Male Spigots which will fit round pipe or flexible hose. Reccommended to be used along with galvanised steel spiral ducting(P100M-1) Our metal ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Performance Galvanised Metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength.  Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Insulation of Ductwork It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 125mm 150mm 180mm

GBP 7.90
1