push bog from GBP 2 | See the cheapest prices and offers on css.lazzaweb.dk

Verplas Thermal Rectangular Pipe

Verplas Thermal Rectangular Pipe Product Part Number 1 x Meter of 204x60mm rectangular pipe - SST-204-1M 1 x Meter of 220x90mm rectangular pipe - SST-220-1M-IND Description The Verplas Self-Seal thermal 1 meter duct is manufactured from graphite impregnated expanded Polystyrene. Supplied with duct to duct connector to fit into the next set of duct. The open end of the duct is designed to push-fit over a 204x60mm/220/90mm fan spigot. It is possible to cut the length to allow for a duct to fitting to push lock and click into a female coupling. Pipe meets thermal conductivity requirements of BASF-EN13163 as well as exceeding the requirements of DW/143 Class A for low leakage. Available Sizes 204x60mm 220x90mm

GBP 21.80

1

Airflow Airflex 90° Horizontal Elbow

Airflow Airflex 90° Horizontal Elbow Product Part Number Airflex 90° Horizontal Bend - 90000248 Description Airflex Pro Quick and easy to fit system of semi-rigid ducting that can result in up to 70% time saving during the on-site installation process compared to rigid or spiral duct methods The pipe is manufactured from material with an anti-static, non-porous and odourless lining Perfect for long duct runs, devoid of joins It is quick and simple to install thanks to the zero leakage of its push fit connections to other accessories in the range

GBP 11.64

1

Verplas Thermal Rectangular Horizontal 90° Bend

Verplas Thermal Rectangular Horizontal 90° Bend Product Part Number 204x60mm Thermal 90° bend - SST-204-60HB 204x60mm Thermal 90° bend - SST-220-90HB-IND Description Verplas Thermal 204x60/220x90mm 90° Rectangular Horizontal Bend with Male to Female Connectors included. This is part of the award winning Verplas Self-Seal Thermal Range, the Self-Seal technology enables a push – click – lock mechanism, this means that not only is the range incredible efficient but also it quick and easy to install. Insulated thermal ducting is suitable for cold spaces within the home. Sizes Available 204x60mm 220x90mm

GBP 24.25

1

Verplas Thermal Rectangular Vertical 45° Bend

Verplas Thermal Rectangular Vertical 45° Bend Product Part Number 204x60mm 45° Vertical Bend - SST-204-45VB-IND 220x90mm 45° Vertical Bend - SST-220-45VB-IND Description Verplas thermal 204x60mm/220x90mm 90° Rectangular Vertical bend with male to female connectors included. This is part of the Verplas award winning Self-Seal Thermal Range, the Self-Seal technology enables a push – click – lock mechanism, this means that not only is the range incredible efficient but also it quick and easy to install. Insulated thermal ducting is suitable for cold spaces within the home. Available Sizes 204x60mm 220x90mm

GBP 34.07

1

Verplas Thermal Rectangular T Piece

Verplas Thermal Rectangular T Piece Product Part Number 204x60mm Thermal T Piece - SST-204-TP-IND 220x90mm Thermal T Piece - SST-220-TP-IND Description Verplas Thermal 204x60mm Rectangular T-Piece with male to female connectors included. This is part the Verplas award winning Self-Seal Thermal Range, the Self-Seal technology enables a push – click – lock mechanism, this means that not only is the range incredible efficient but also it quick and easy to install. Insulated thermal ducting is suitable for cold spaces within the home. Available Sizes 204x60mm 220x90mm

GBP 31.82

1

Verplas Thermal Rectangular Plenum

Self-Seal Thermal Plenum Product Part Number 204x60mm Thermal 125 Plenum - SST-204-PL-IND 220x90mm Thermal 125 Plenum - SST-220-PL-IND 220x90mm Thermal 160 Plenum - SST-220-PL160-IND Description Verplas Thermal 204x60mm/220x90mm Rectangular to 125mm Round Plenum with male to female connectors included. Part of Verplas award winning Self-Seal Thermal Range, the Self-Seal technology enables a push – click – lock mechanism, this means that not only is the range incredible efficient but also it quick and easy to install. Insulated thermal ducting is suitable for cold spaces within the home. Available Sizes 204x60mm 125mm Spigot 220x90mm 125mm Spigot 220x90mm 160mm Spigot

GBP 27.90

1

PVC 90o Elbow Bend

PVC 90º Elbow Bend Product Part Number 100mm PVC 90º Elbow Bend - B90100 125mm PVC 90º Elbow Bend - B90125 150mm PVC 90º Elbow Bend - B90150 KEY FEATURES: UK manufactured Male fitting - Will fit inside round pipe or flexible hose. Easy to install and durable, just push-fit duct and fittings together. Compatible with most other manufactures Extensive range of fittings, outlets, and grilles available Max / min temperature: +60°c / -15°c. DW/154 and meets UL94HB flammability standard Suitable to use in compliance with Part F Building Regulations. Sap Appendix Q Compliant Airflow performance independently tested by BSRIA or BRE. Compatibility Compatible with most manufacturers including 100mm 125mm 150mm Verplas VKC300 VKC350 VKC360 Vent-Axia 372004 427360 370295 Manrose 44900 55900 66900 Domus 490

GBP 2.58

1

Verplas Thermal Rectangular Horizontal 45° Bend

Verplas Thermal Rectangular Horizontal 45° Bend Product Part Number 204x60mm 45° Thermal Bend - SST-204-45HB 220x90mm 45° Thermal Bend - SST-220-45HB-IND Description Verplas self-seal 45° thermal bend, makes full use of the push-click-lock mechanism meaning a large reduction in the time it takes to install a system. The insulated ducting is best used in cold spaces in the within the home. Manufactured from EPS using male to female connections. The Bend tested to meet thermal conductivity requirements set out in BASF-EN13163 to help prevent condensation. On top this the bend exceeds requirements set out in the DW/143 Class A meaning the product provides a low leakage solution to a ventilation system. Sizes Available 204x60mm 220x90mm

GBP 24.66

1

PVC 45o Round Elbow Bend

PVC 45º Round Elbow Bend Product Part Number 100mm PVC 45º Round Elbow Bend - B45100 125mm PVC 45º Round Elbow Bend - B45125 150mm PVC 45º Round Elbow Bend - B45150 KEY FEATURES: UK manufactured Male fitting - will fit inside round pipe or flexible hose. Easy to install and durable, just push-fit duct and fittings together. Compatible with most other manufactures Extensive range of fittings, outlets, and grilles available Max / min temperature: +60°c / -15°c. DW/154 and meets UL94HB flammability standard Suitable to use in compliance with Part F Building Regulations. Sap Appendix Q Compliant Airflow performance independently tested by BSRIA or BRE. Compatibility Compatible with most manufacturers including 100mm 125mm 150mm Verplas VKC301 VKC351 VKC361 Vent-Axia 372005 441657 - Manrose 44450 55450 - Domus 491 591 691 Nuaire PVC491WH PVC591WH

GBP 2.57

1

PVC T Piece Round

PVC T Piece Round Product Part Number 100mm PVC Round T Piece - T100 125mm PVC Round T Piece - T125 150mm PVC Round T Piece - T150 KEY FEATURES: UK manufactured Male fitting - will fit inside round pipe or flexible hose Easy to install and durable, just push-fit duct and fittings together Compatible with most other manufactures Extensive range of fittings, outlets, and grilles available Max / min temperature: +60°c / -15°c DW/154 and meets UL94HB flammability standard Suitable to use in compliance with Part F Building Regulations Sap Appendix Q Compliant Airflow performance independently tested by BSRIA or BRE Compatibility Compatible with most manufacturers including 100mm 125mm 150mm Verplas VKC302 VKC352 VKC362 Vent-Axia 372007 428626 370237 Manrose 44920 44930 44940 Domus 492 592 692 Nuaire PVC492WH

GBP 6.47

1

PVC Round Pipe Connector

PVC Round Pipe Connector Product Part Number 100mm Connector - C100 125mm Connector - C125 150mm Connector - C150 Key Features: UK manufactured Pipe ends are female and will accept male fittings such as bends and grilles. Lengths of duct channel can be joined together using a male connector. Easy to install and durable, just push-fit duct and fittings together. Compatible with most other manufactures Extensive range of fittings, outlets, and grilles available Max / min temperature: +60°c / -15°c. DW/154 and meets UL94HB flammability standard Suitable to use in compliance with Part F Building Regulations. Sap Appendix Q Compliant Airflow performance independently tested by BSRIA or BRE. Compatibility Compatible with most manufacturers including 100mm 125mm 150mm Verplas EK0028 VKC355 VKC365 Vent-Axia 372006 428633 370299 Manrose 141C 515C

GBP 1.52

1

Verplas Thermal Rectangular Vertical 90° Bend

Verplas Thermal Rectangular Vertical 90° Bend Product Part Number 204x60mm 90° Vertical Bend - SST-204-90VB-IND 220x90mm 90° Vertical Bend - SST-220-90VB-IND Description Verplas thermal self-seal vertical 90° bend uses a push-click-lock mechanism to improve the speed in which a system can be installed. Manufactured from EPS and is supplied with self-seal female couplings. The couplings are manufactured fro a high impact PVC. The Bend has been tested on thermal conductivity based on the requirements of BASF-EN13163 which assists in the prevention of condensaton build up. Flame retardant to DIN 4102-B1. The click and lock mechanism has exceeded the requirements set out in the DW/143 Class A leakage test as well as the DW/154 ductwork standards. Available Sizes 204x60mm 220x90mm

GBP 24.73

1

220x90mm - Double Airbrick with Grille - GPVC220

Double Airbrick with Grille - Double Airbrick Adaptor to fit 204mmx60mm or 220x90mm ducting systems - Comes with pre-fitted with two brown or white airbrick grilles - Specially designed to provide 90% free area supply and extract air vent in accordance with 2010 Domestic Ventilation Compliance Guide - Can be used in a bathroom, kitchen, ulility or part of whole house ducting systems Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems Is designed to be low profile to fit inside ceilings, floor slabs, or to be concealed above kitchen wall units. It is best utilised as part of a ducting system for high powered cooker hood extractors and whole house ventilation systems, such as heat recovery systems or mechanical ventilation systems in offices, houses, and apartments. KEY FEATURES: UK Manufactured Easy to install and durable, just push-fit duct and fittings together Compatible with most other manufactures Extensive range of fittings, outlets, and grilles available Max / Min Temperature: +60c / -15c. DW/154 and meets UL94HB Flammability standard Suitable to use in compliance with Part F Building Regulations. Sap Appendix Q Compliant Airflow performance independently tested by BSRIA or BRE. Compatibility Can be used as part in 204x60mm or220x90mm ductwork systems with suppliers such as Verplas(VKC5733G), Vent Axia(449224), Manrose (60977). Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of Plastic Ducting Sealant and Aluminium Duct Sealing Tape Apply Duct sealant to the male fitting Push together Apply Aluminium Duct Sealing Tape over joint

GBP 11.20

1

Vent-Angel Ventilation Fire Safety Unit

Vent-Angel Ventilation Fire Safety Unit Product Part Number Vent-Angel Fire Safety Unit - QV-VA-21 Description The Vent-Angel is suitable for domestic homes and apartments and connects to any domestic fire alarm and will in the unfortunate event of a fire will remove the power supply to any type of Ventilation unit. The Vent-Angel unit can also control mains powered fire dampers, Purge fans or other devices The Vent -Angel is simple to install and comes complete with a discrete wall mounted control panel to test and reset the system. Why Use a Vent-Angel If a fire breaks out there is a possibility that any system that supplies fresh air could further cause the fire to intensify and spread. If even a small fire breaks out the smoke will enter the ventilation unit’s ductwork that could be very costly to remove any contaminants and smell. Control Panel The Vent-Angel includes a Test / Rest switch plate which would be mounted remotely in a location that has easy access (i.e. Hallway, Utility room), the switch plate also has LED operational indication. i.e. the Test push button with be illuminated Green under normal running conditions and the Reset push button will be illuminated Red in the event of a fault. The Test / Reset switch plate will also allow the system to be tested by pushing the TEST button. (It is recommended that this test is carried out twice yearly), to Reset the system press the RESET button, this action is also required if the system has been activated. Please ensure all Smoke/Fire Alarm issues have been resolved before activating the Vent Angel system. Contents: 1 x Vent Angel unit 1 x Vent Angel Test/Reset switch plate 1 x 15m length of 9 core YY cable 1 x 4mm O ring crimp 2 x Lockable Glands (FUW optional Fire Damper / Purge unit)

GBP 204.00

1

Domus DX-CON - Multi Fan Remote Control

Domus DX-CON - Multi Fan Remote Control Optional remote controller DX-CON, designed to work the DX fan range and integral and remote sensors. Features Provides supply or extract variable speed Automatic or manual switching of several fans Economy speed setting 50% On/off switches Maximum or economy performance Control DX-CON can control several fans at one time from the same controller Up to 5 6” fans Up to 5 9” fans Up to 2 12” fans Do not mix fan sizes on the same controller Installation Mount the controller 1.5 meters from the floor Do no expose to large amount of oil, grease or water To install - Lift panel and remove two screws - Push out the backplate box cable entry using a screwdriver - Spot through backplate box and drill and plug the wall. Flat the backplate box to the prepared wall - Feed 20cm of the supply cable into the box - Connect end of the cable into the control block, connect wires (see wiring diagram) - If a security strap has been fitted, hook the lip of the security strap in hinge socket. Fit the control into the backplate box - Secure installation

GBP 132.19

1

Metal T Piece

Metal T Piece Product Part Number 100mm T Piece - T100M 125mm T Piece - T125M 150mm T Piece - T150M 160mm T Piece - T160M 180mm T Piece - T180M 200mm T Piece - T200M Description Metal T piece, main trunk and single branch off in size of your choice, constructed of high quality durable galvanised metal All spigots are male and will fit inside galvanised spiral or other female fittings NOTE: Supplied without seals Made in the UK Perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans Can be used to connect long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufactures for galvanised metal ducting Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) should be insulated. The insulation needs to be

GBP 17.52

1

Metal Female Duct Connector

Female Duct Metal Connector Product Part Number 100mm Duct Connector - C100FM 125mm Duct Connector - C125FM 150mm Duct Connector - C150FM 160mm Duct Connector - C160FM 180mm Duct Connector - C180FM 200mm Duct Connector - C200FM Description These connectors are constructed of high quality durable galvanised metal Female duct metal connectors are designed to join two male duct fittings together Manufactured in the UK, made without seals Designed for use with safe seal galvanised metal ducting but it can be used with equivalent standard metal ducting or some plastic ducting ranges Perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans Can be used to connect long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation

GBP 2.47

1

125mm PVC Self Seal Connector Duct to Duct

125mm PVC Self Seal Connector Duct to Duct Product Part Number 125mm duct to duct connector - VSSC125PP Description Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems KEY FEATURES: UK Manufactured Pipe ends are female and will accept male fittings such as bends and grilles Lengths of duct channel can be joined together using a male connector Easy to install and durable, just push-fit duct and fittings together Compatible with most other manufactures Extensive range of fittings, outlets, and grilles available Max / Min Temperature: +60c / -15c DW/154 and meets UL94HB Flammability standard Suitable to use in compliance with Part F Building Regulations Sap Appendix Q Compliant Airflow performance independently tested by BSRIA or BRE Performance Solid Rigid ducting systems are suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space.

GBP 10.13

1

Metal 45° Bend

Metal 45° Bend Product Part Number 100mm Metal Bend - B45100M 125mm Metal Bend - B45125M 150mm Metal Bend - B45150M 160mm Metal Bend - B45160M 180mm Metal Bend - B45180M 200mm Metal Bend - B45200M Description 45° bend metal is constructed of galvanised metal and features 2 male spigots, which will fit inside flexible hose or round pipe. Best used with galvanised steel spiral ducting (round metal ducting - P100M-1). NOTE: Supplied without rubber seals Our metal ducting is manufactured in the UK with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Performance Galvanised metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or Aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Insulation of Ductwork It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/ (m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space.

GBP 6.07

1

Metal Male Duct Connector

Metal Male Duct Connector Product Part Number 100mm Male Connector - C100MM 125mm Male Connector - C125MM 150mm Male Connector - C150MM 160mm Male Connector - C160MM 180mm Male Connector - C180MM 200mm Male Connector - C200MM Description Male fitting constructed of high quailty durable galvanised metal. NOTE: Supplied without seals Made in the UK Perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans Can be used to connect long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of

GBP 2.40

1

Short Round to Rectangular Adaptor Female

110x54mm - Short Round to Rectangular Adaptor Female Product part Number Short Round Female Adaptor - AS110100 Description Adaptor for 100mm round female spigot to 110mm x 54mm rectangular duct pipe Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole-house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm Rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 110x54mm rectangular to 100mm

GBP 2.96

1

Quiet-Vent Round Metal Ducting

Quiet-Vent Ventilation Round Metal Ducting Product Part Number 100mm Metal Pipework x 1 meter - P100M-1 125mm Metal Pipework x 1 meter - P125M-1 150mm Metal Pipework x 1 meter - P150M-1 180mm Metal Pipework x 1 meter - P180M-1 200mm Metal Pipework x 1 meter - P200M-1 Description Galvanised spiral metal, available in different sizes, and available in 1-meter lengths. Duct length can be joined using Metal Male Duct Connectors. Compatibility Compatible with most other leading manufacturers for galvanised metal ducting. Performance Solid rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend You provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping the duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm Rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 100mm x 1 Meter Round Metal Ducting 125mm x 1 Meter Round Metal Ducting 150mm x 1 Meter Round Metal Ducting 180mm x 1 Meter Round Metal Ducting 200mm x 1 Meter Round Metal Ducting

GBP 8.06

1

Metal 90° Bend

Metal 90° Bend Product Part Number 100mm - B90100M 125mm - B90125M 150mm - B90150M 160mm - B90160M 180mm - B90180M 200mm - B90200M Description 90 degree galvanized metal elbow bend which uses 2 male spigots, which will fit inside round pipe or flexible hose. Best used with galvanised steel spiral ducting (round metal ducting - P100M-1). NOTE: Supplied without rubber Seals Our metal ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Performance Galvanised Metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Insulation of Ductwork It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool

GBP 6.82

1

Quiet-Vent Metal 45o Pressed Bend with seals

Quiet-Vent Metal 45° Bend With Seals Product Part Number 125mm - QV-B45125M 150mm - QV-B45150M 180mm - QV-B45180M Description Quiest-Vent 45° bend metal is constructed of galvanised metal, it uses 2 male spigots which will fit within flexible hose or round pipe. -Can be use with galvanised steel spiral ducting (round metal ducting - P100M-1) Our metal ducting is manufactured in the UK with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your ventilation system, kitchen extractor fan, bathroom fan or in-line extract fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and heat recovery systems. Performance Galvanised metal ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible PVC or Aluminium duct. It is suitable to use in compliance with Part F Building Regulations. Metal ducting is best suited for larger ductwork due to its superior strength. Compatibility Compatible with most other lead manufacturers for galvanised metal ducting Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of plastic ducting sealant and aluminium duct sealing tape Apply duct sealant to the male fitting Push together Apply aluminium duct sealing tape over joint Insulation of Ductwork It is important that any ducting located in colder areas, such as loft spaces, are always insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/ (m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations Available Sizes 125mm 150mm 180mm

GBP 6.16

1

Rectangular Ducting Elbow Bend(Fixed Spigot)

Rectangular Ducting Elbow Bend (Spigot) Product Part Number 110x54mm Elbow Bend - S110 204x60mm - Fixed Spigot - SP204-125 204x60mm - Fixed Spigot - SP204-150 220x90mm - Fixed Spigot - SP220-125 220x90mm - Fixed Spigot - SP220-150 Description 90 degree elbow bend which converts rectangular PVC ducting to round PVC ducting in order to install a air valve or to convert to round pipe. Our range of plastic ducting is UK manufactured with top quality materials that will supply a durable product suitable for domestic and commercial systems It is perfectly suited for ducting your Ventilation system, Kitchen extractor fan, bathroom fan or In-Line Extract Fans It can be used as a part of a long ductwork run for a variety of purposes including whole house ventilation, passive stack vent, positive input, air conditioning, HVAC, and Heat Recovery Systems. Performance Solid Rigid ducting is suitable for use in all buildings to provide superior airflow performance vs. comparative size rectangular or flexible pvc or Aluminium duct. Suitable to use in compliance with Part F Building Regulations. Installation To provide the best performance in airtightness and durability we recommend you provide greater mechanical strength to a joint by using a combination of Plastic Ducting Sealant and Aluminium Duct Sealing Tape Apply Duct sealant to the pipe connections Push together Apply Aluminium Duct Sealing Tape over joint Alternatively, you can use self-sealing fittings that speed up the time taken by up to 70% and can be easily dismantled Insulation of Ductwork It is important that any ducting located in a cold area (e.g. loft space) to be insulated. The insulation needs to be the equivalent of 25mm thick and have a thermal conductivity of 0.04W/(m.k) or less. This ensures that condensation doesn’t form due to the difference in air temperature inside the duct when compared to the air temperature in the cold space. If you don’t have a loft space there is still a need for insulated ducting on the intake and exhaust legs, as they will be carrying cold air in a warm space. The level of insulation can be achieved by wrapping PVC duct in a layer of 25mm duct wrap that has a silver foil face on a 25mm rockwool It is also worth noting that foil wrap with air bubbles (bubble wrap) is no longer applicable in building control regulations

GBP 2.66

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)