Awardvindende Google Marketing Powerhouse

KNOWLED WMR Rail Mount Receiver for KNOWLED LiteFlow Cine Reflector System

The GODOX WMR Receiver is designed for use with the Godox KNOWLED LiteFlow Cine Reflector System. It enables you to mount any of the LiteFlow panels (with the exception of the LiteFlow100 panels) to any light stand, or any studio grip accessories with a standard 5/8" stud mount, making rigging up your set an easier, and more enjoyable process. perfect for Cinematographers, DOPs, and Lighting gaffers who already have a LiteFlow kit, but need extra Receiver adapters, for added flexibility. The Godox WRM Receiver is perfect for Cinematographers, DOPs, and Lighting gaffers who already have a LiteFlow kit, but need extra Receiver adapters, enabling them to use more of the panels in their kit, for virtually limitless lighting possibilities.

X1R 2.4GHZ X-System Flash Receiver Only (Canon)

The GODOX X1R X-System TTL Flash Receiver enables you to trigger Non-Godox/Pixapro branded flashes with any of the Godox 2.4GHz X-Series Flash Triggers. It features a built-in hot shoe, which allows you to connect virtually any hot-shoe Flashgun/Speedlite to it, enabling you to easily incorporate it into your flash setup. It also features a 2.5mm Sync cable jack, enabling it to be plugged into a third-party studio strobe. The X1R is perfect for Photographers who have other brands of flashes that they would like to integrate into their Godox flash setups. The GODOX X1R X-System TTL Flash Receiver is an essential accessory for photographers who would like to integrate third-party flashes into their Godox X-System flash setup. Featuring HSS and TTL support with supported flashes, as well as the added bonus of working as a receiver for a wireless shutter release for your camera.

DM-16 16-Channel 433MHz Flash Trigger With AC-Powered Receiver Set

The GODOX DM-16 Trigger and Receiver Set is a 16-channel 433MHz radio flash trigger that can be used with virtually any mains-powered studio strobe flash on the market. The Trigger/Transmitter features a universal single-pin hotshoe, which makes it compatible with virtually any camera that has a hot shoe, including most DSLRs, Mirrorless, and some high-end point-and-shoot cameras. The receiver uses an IEC320 pass-through system enabling it to be powered by the same IEC320 cable (sometimes known as a kettle lead) that powers your flash head. simply plug the receiver into your flash's power cable port, and then insert the mains power cable into the IEC320 connector on your trigger, and you're ready to go. The Godox DM-16 Trigger and Receiver set is a perfect solution for photographers who are using third-party studio strobes, and need a simple no-frills wireless trigger system to fire them without having to resort to using cumbersome sync-cables or unreliable infrared triggers.

KUPO KS-047 Baby Receiver Wall Plate (SPECIAL ORDER)

The KUPO Baby Receiver Wall Plate (KUP-KS-047) is designed for mounting lighting fixtures or grip accessories to walls. This robust wall plate features a welded 3-inch long 5/8-inch baby stud, making it ideal for attaching to baby stands, junior receivers, or as a platform for monitors, speakers, and lighting. Its chrome steel construction ensures durability and reliability in professional settings such as film, theatre, and photography.

PRO ST-III R 2.4GHz X-System Flash Receiver Only (X1R) - CLEARANCE Sony

The PIXAPRO PRO ST-III R equivalent to Godox's X1 TTL is a 2.4GHz Radio Wireless Flash Receiver designed for use with the Pixapro Pro ST-III TTL Flash Trigger system, The PIXAPRO PRO ST-III R also has a full GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off. The ST-III system also has 32 separate channels, which enable you to use your ST-III trigger system in the vicinity of other photographers, without fear of accidentally triggering each other’s lights. NOTE: This item requires the Pro ST-III Trigger Set to trigger your flash. This Item is sold as an extra receiver for people with multiple TTL compatible flashes.

PRO ST-III R 2.4GHz X-System Flash Receiver Only (X1R) - CLEARANCE Canon

The PIXAPRO PRO ST-III R equivalent to Godox's X1 TTL is a 2.4GHz Radio Wireless Flash Receiver designed for use with the Pixapro Pro ST-III TTL Flash Trigger system, The PIXAPRO PRO ST-III R also has a full GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off. The ST-III system also has 32 separate channels, which enable you to use your ST-III trigger system in the vicinity of other photographers, without fear of accidentally triggering each other’s lights. NOTE: This item requires the Pro ST-III Trigger Set to trigger your flash. This Item is sold as an extra receiver for people with multiple TTL compatible flashes.

PRO ST-III R 2.4GHz X-System Flash Receiver Only (X1R) - CLEARANCE Nikon

The PIXAPRO PRO ST-III R equivalent to Godox's X1 TTL is a 2.4GHz Radio Wireless Flash Receiver designed for use with the Pixapro Pro ST-III TTL Flash Trigger system, The PIXAPRO PRO ST-III R also has a full GR Group style interface allowing up to 5 Groups to be individually set to either TTL, Manual, or Off. The ST-III system also has 32 separate channels, which enable you to use your ST-III trigger system in the vicinity of other photographers, without fear of accidentally triggering each other’s lights. NOTE: This item requires the Pro ST-III Trigger Set to trigger your flash. This Item is sold as an extra receiver for people with multiple TTL compatible flashes.

GEARTREE 2742 Single-Point Mounting Ring Clamp Interface for GEARTREE System

The GEARTREE 2742 Single-Point Mounting Clamp with 5/8" Receiver features a single 16mm spigot receiver, to enable you to to fix accessories to a floor-to-ceiling stand, light stand, or desk stand to connect compatible brackets or arms. Durable & superior quality | UK Stock | Next-day deliver

PRO ST-III T 2.4GHz Radio-Controlled Flash Trigger (X1T) - CLEARANCE Sony

The PIXAPRO PRO ST-III equivalent to Godox's X1 TTL is a 2.4GHz Radio flash trigger system capable of transmitting TTL information between your camera and compatible flashes. The PIXAPRO PRO ST-III trigger has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you don’t need direct line of sight, and is not affected by bright Sunlight which can sometimes cause problems with optical slave systems. The perfect solution for the busy photographer who require a reliable TTL radio trigger system.

PRO ST-III T 2.4GHz Radio-Controlled Flash Trigger (X1T) - CLEARANCE Nikon

The PIXAPRO PRO ST-III equivalent to Godox's X1 TTL is a 2.4GHz Radio flash trigger system capable of transmitting TTL information between your camera and compatible flashes. The PIXAPRO PRO ST-III trigger has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you don’t need direct line of sight, and is not affected by bright Sunlight which can sometimes cause problems with optical slave systems. The perfect solution for the busy photographer who require a reliable TTL radio trigger system.

PRO ST-III T 2.4GHz Radio-Controlled Flash Trigger (X1T) - CLEARANCE Fuji

The PIXAPRO PRO ST-III equivalent to Godox's X1 TTL is a 2.4GHz Radio flash trigger system capable of transmitting TTL information between your camera and compatible flashes. The PIXAPRO PRO ST-III trigger has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you don’t need direct line of sight, and is not affected by bright Sunlight which can sometimes cause problems with optical slave systems. The perfect solution for the busy photographer who require a reliable TTL radio trigger system.

KNOWLED WMS Rail Mount Stud for KNOWLED LiteFlow Cine Reflector System

The GODOX WMS Stud is designed for use with the Godox KNOWLED LiteFlow Cine Reflector System. It enables you to mount any of the LiteFlow panels (with the exception of the LiteFlow100 panels) to any light stand, or any studio grip accessories with a standard 5/8" stud mount, making rigging up your set an easier, and more enjoyable process. perfect for Cinematographers, DOPs, and Lighting gaffers who already have a LiteFlow kit, but need extra Receiver adapters, for added flexibility. The Godox WRM Receiver is perfect for Cinematographers, DOPs, and Lighting gaffers who already have a LiteFlow kit, but need extra Receiver adapters, enabling them to use more of the panels in their kit, for virtually limitless lighting possibilities.

PRO ST-III T 2.4GHz Radio-Controlled Flash Trigger (X1T) - CLEARANCE Olympus/Panasonic

The PIXAPRO PRO ST-III equivalent to Godox's X1 TTL is a 2.4GHz Radio flash trigger system capable of transmitting TTL information between your camera and compatible flashes. The PIXAPRO PRO ST-III trigger has a transmission range of approximately 100m in an open area, and since the transmitter and receivers use radio waves as opposed to Infra-red, you don’t need direct line of sight, and is not affected by bright Sunlight which can sometimes cause problems with optical slave systems. The perfect solution for the busy photographer who require a reliable TTL radio trigger system.

Dmx 2.4ghz wireless transceiver set for echo600 - clearance

This DMX512 Wireless receiver is designed to be used with the ECHO600 LED lights. It plugs into the ECHO600 LED light, to enable the light to wirelessly receive signals from the ECHO600 Wireless DMX controller console, using the 2.4GHz frequency band. This device allows lighting directors and cinematographers to control a single, or multiple ECHO600 lights during Film, Television and Theatrical productions. This DMX512 Wireless receiver is perfect for Stage lighting, large-scale theatrical performances, stadium lighting, temporary stage performances, urban lighting systems, TV stations, conference centres, professional theatres, theme parks, and movie sets.

CUBE-C-CC Charging Case for the Godox CUBE-C Wireless Microphone System - (SPECIAL ORDER)

The GODOX CUBE-C-CC Charging Case is designed for use with the CUBE-C Wireless Mic System. As well as being a Sleek and Dependable storage solution for your Cube-C Microphones, it also doubles as a Wireless Charging Case, enabling you to keep two CUBE-C transmitters and one receiver charged when you are away from mains power. featuring built-in slots for the receiver and two transmitters, its Internal 2300mAh Battery can Charge All Three Devices Up To Three Times before needing to recharge the case via its USB-C port.

CVM-D-SPX (UC) 3.5mm TS to Apple Lightning Interface Adapter - CLEARANCE

The 45cm Comica Audio CVM-D-SPX (UC) 3.5mm to Apple Lightning cable allows you to connect a microphone or wireless mic receiver that's equipped with a 3.5mm female output connector to th eLightning port of your iPhone or iOS device.

KUPO KCP-610 Foamcore Fork (SPECIAL ORDER)

The Foamcore Fork has four sharp pins that securely grip into the foamcore, ensuring a stable hold. The stud can then be attached to a grip arm or any 5/8" baby receiver, allowing you to easily place the foamcore wherever it’s needed, whether to bounce light or block it.

5/8" Baby Pin to 1-1/8" Junior Pin Adapter

Stand Adapter enables you to mount a light fixture or accessory with a baby 5/8" (16mm) receiver to any stand with a stand with a junior 1-1/8" (28mm). Made from solid steel, the PIXAPRO® 5/8" Baby Pin to 1-1/8" Junior Pin adapter features high strength and durability.

Geartree 2747 Basic Extension Grip Arm

This Basic Extension Grip Arm 2747 adds 10.6" of extension to the Geartree studio stand. It attaches using a standard 5/8" stud and has a 5/8" receiver with locking knob on the end. Up to three of the extension Grip Arms can be stacked. Durable & superior quality | UK Stock | Next-day delivery

Warranty Product KINOII 600+ Studio Flash Head with Built-In 2.4GHz Receiver (QS600 II) - 3 years Warranty

Warranty Product V860III TTL Speedlite With Rechargeable Battery, Built-In 2.4GHz Receiver & High-Speed Sync - 2 years Warranty

Warranty Product V1 Round-Head TTL Speedlite With Built-In 2.4GHz Receiver And High-Speed Sync - 2 years Warranty

KUPO KS-019 Swivel Extension Arm W/ 5/8" Socket (SPECIAL ORDER)

The KS-019 Swivel Extension Arm is a versatile tool designed to offer flexible rigging solutions in studio and lighting setups. Constructed with durable aluminium and steel, this mini extension arm features a 5/8" baby receiver on one end and a 16mm hex baby stud with a 3/8"-16 female thread on the other. This design ensures compatibility with various lighting equipment and accessories. The double ball elbow joint provides smooth, adjustable articulation in any direction, making it ideal for use with Convi and Super Viser clamps.

Warranty Product GIO1 Round-Head TTL Speedlite With Built-in 2.4GHz Receiver and High-Speed Sync (V1) - 3 years Warranty

RC-A5 II 433MHz Wireless Light Remote Control For LED Lights

The RC-A5 II Wireless Remote Control enables you to wirelessly control a single head unit, or multiple groups of lights simultaneously, without having to walk up to each individual light and set each one. There is a total of 16 available channels, to choose from, which allows one or more LED studio lights to be controlled remotely. The RC-A5 II features a digital display that shows you your current settings.