34 results (0,15674 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Show all

Reset filter

Products
From
Shops

Finerfilters Self-Piercing Saddle Valve

Finerfilters Self-Piercing Saddle Valve

Finerfilters Self-Piercing Saddle Valve. Finerfilters self-piercing saddle valve is suitable for allowing connection to a 15mm copper pipe. This saddle clamp fits over 15mm copper pipe and allows a feed to connect to 1/4" Tubing. Ideal for plumbing a water feed to your Reverse Osmosis Unit, undersink water kit or for supplying water to a Fridge. A saddle valve is mounted directly onto 15mm copper pipe. Saddle valves are self-tapping devices. Once mounted onto a pipe, with the included rubber seal in place, all that is required is to turn the valve clockwise until it pierces the pipe. When the valve handle can no longer be turned, it has done tapping the pipe. Turning the handle counter-clockwise opens the valve. Please turn off the mains water supply to install this item. Please Note: The saddle valve will be supplied with 1m of tubing, but the colour of the tubing supplied may vary to that included in the picture.

GBP 6.99
1

Finerfilters Long Reach Ceramic Valve Quarter Turn Water Filter Tap

Finerfilters Long Reach Ceramic Valve Quarter Turn Water Filter Tap

Deluxe Long Reach Ceramic Valve Quarter Turn Tap. Classic European Style. Fits all Water Filter Systems & Reverse Osmosis Systems Finerfilters Are Proud To Present A Deluxe Long Reach Ceramic Valve Quarter Turn Tap Classic Style Single Lever Polished Chrome Drinking Water Filter Tap Long Reach Neck Swivels 360 Degrees Single Lever 1/4 Turn Ceramic Valve Operating Pressure: Minimum - 0.5 Bar/7PSI Maximum - 8.5 Bar/123PSI

GBP 19.99
1

John Guest ASV3 - Angle Stop Valve 1/4" Water Feed Connector 15mm Push Fit

John Guest ASV3 - Angle Stop Valve 1/4" Water Feed Connector 15mm Push Fit

JOHN GUEST ASV3 - ANGLE STOP VALVE 1/4" WATER FEED CONNECTOR 15mm PUSH FIT This is a genuine John Guest ASV3 adapter and meets NSF (National Science Foundation) standards and is WRAS Approved fitting. This angle stop valve is used to obtain a 1/4" water feed from standard 15mm mains pipe. The valve connects inline with 15mm pipework using John Guest Speed Fittings, and tees off a 1/4" connection (to connect to water coolers, fridges, under sink filters, etc...). The valve has a built in one way check valve and a On / Off control for the 1/4" outlet for ease of use

GBP 19.99
1

Flush Valve Assembly for Reverse Osmosis Systems

Flush Valve Assembly for Reverse Osmosis Systems

Flush Valve Assembly for Reverse Osmosis Systems This is an attachment that can be added onto the waste/drain line of a Reverse Osmosis System (Aquarium or Domestic) which allows water to bypass the flow restrictor. This then allows the build-up of pressure within the membrane housing to be released, subsequently allowing water to run across the surface of the membrane to flush it. This attachment is handy for customers who may have a compact reverse osmosis system that doesn't come with a flush valve as standard.

GBP 6.99
1

Finerfilters 6.5 Litre Pressurised Stainless Steel Reverse Osmosis Water Storage Tank

Finerfilters 6.5 Litre Pressurised Stainless Steel Reverse Osmosis Water Storage Tank

Finerfilters Reverse Osmosis 6.5 Litre / 3.2 Gal Pressurised Storage Tank Tank uses 1/4" valves. Stainless steel, 3 gallons (11.35 litres). Operating pressure 6 bar (80-90 psi) Weight is 3.4kg Dimensions: 280 x 280 x 375 Please Note: All tanks are sold without a tank valve. If you're replacing an existing tank, your old tank valve will probably work. If you want a new valve, please contact us before placing your order.

GBP 39.99
1

Finerfilters 10 Litre Pressurised Reverse Osmosis Water Storage Tank

Finerfilters 10 Litre Pressurised Reverse Osmosis Water Storage Tank

Finerfilters 10 Litre Pressurised Reverse Osmosis Water Storage Tank This tank is designed to be used with a Reverse Osmosis system, with a holding capacity of 10 litres. The tank also contains a rubber bladder, which is kept at around 10PSI to allow the water to be drawn. Water is stored in the bladder, which is made of a material called butyl. When there is a demand for water, the water is pushed out of the tank's bladder by air pressure. Once the tank has been depleted to a certain level, and pressure is released from the tank, the auto shut off valve on the RO system senses this and starts to produce water to refill the tank. The water you're going to drink doesn't touch the material that the tank is made from – Except for the spout, which is food grade polypropylene on most modern tanks. The water contacts only the butyl bladder. Butyl has been used for years for RO tanks and well tanks and is regarded as inert. Dimensions: Weight: 2600g/2.6kg Please Note: All tanks are sold without a tank valve. If you're replacing an existing tank, your old tank valve will probably work. If you want a new valve, please contact us before placing your order

GBP 34.99
1

Finerfilters Reverse Osmosis 6.5 litre Pressurised Storage Tank

Finerfilters Reverse Osmosis 6.5 litre Pressurised Storage Tank

Finerfilters Reverse Osmosis 6.5 litre Pressurised Storage Tank Please Note: All tanks are sold without a tank valve. If you're replacing an existing tank, your old tank valve will probably work. If you want a new valve, please contact us before placing your order Replacement pressurised water storage tank for your Reverse Osmosis Water filter system. This tank can be connected to additional tanks to increase the storage capacity on your Reverse Osmosis system. This tank is an air bladder tank meaning the water does not touch the metal outer shell, but rests in a butyl bladder. There is a small air charge between the outside of the bladder and the inside of the tank. It’s the air pressure that pushes the water out of the tank when the tap is opened. The tank is pre-charged with air but will require topping up as part of the regular maintenance of your reverse osmosis system. Air can be added using a bicycle pump or similar.

GBP 27.99
1

10" Standard Clear Water Filter Housing with 3/4" Ports, PRV & Doulton Ultracarb Imperial OBE W9223006 Ceramic Water Filter

10" Standard Clear Water Filter Housing with 3/4" Ports, PRV & Doulton Ultracarb Imperial OBE W9223006 Ceramic Water Filter

Finerfilters 10" Clear Housing with 3/4" ports, Pressure Release Valve &Doulton Ultracarb Imperial OBE (W9223006) Filter Housing Specifications Clear 10" water filter housing with 3/4" BSP brass threaded ports and PRV (pressure release valve).This filter housing is suitable for under sink water filter systems, Reverse Osmosis, Koi Filters, Pre-Filters, KDF, Water Fed Pole Systems, Bio Diesel Filters and any other filter using standard 10" cartridges. Max working pressure: 125 PSI Filter housing fits all 10" standard sized water filter cartridges. 3/4" BSP Brass threaded ports, ideal for a high flow rate Built in Pressure Release Valve (PRV), to release pressure before changing filters Clear bowl, ideal for viewing the current state of the filter cartridge withinFood grade plastics, suitable for drinking water filters The Doulton Ultracarb Imperial OBE Cartridge uses a 4 stage system to remove bacteria, pathogens, chlorine, lead and organic material. The carbon block core is more effective than granular carbon at removing taste and odours associated with chlorine.

GBP 59.99
1