87 results (0,15051 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Material: Standard CDS)

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Material: Standard CDS)

This cage offers substantial protection whilst avoiding any permanent changes to the vehicle. The rear mounts bolt direct to the rear strut tops whilst the front plates sit on top of the rear seat shelf, simply mark and drill the holes for the front plates and fit the high quality Riv-nuts provided with the cage. This is a 2 piece cage joined by FIA approved lap joints. The cage consists of a centre X with harness bars and curved gusseting. These are available powder coated in a range of colours!

GBP 819.00
1

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Specific Metallic RAL, Material: Standard CDS)

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Specific Metallic RAL, Material: Standard CDS)

This cage offers substantial protection whilst avoiding any permanent changes to the vehicle. The rear mounts bolt direct to the rear strut tops whilst the front plates sit on top of the rear seat shelf, simply mark and drill the holes for the front plates and fit the high quality Riv-nuts provided with the cage. This is a 2 piece cage joined by FIA approved lap joints. The cage consists of a centre X with harness bars and curved gusseting. These are available powder coated in a range of colours!

GBP 970.20
1

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Specific RAL, Material: Standard CDS)

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Specific RAL, Material: Standard CDS)

This cage offers substantial protection whilst avoiding any permanent changes to the vehicle. The rear mounts bolt direct to the rear strut tops whilst the front plates sit on top of the rear seat shelf, simply mark and drill the holes for the front plates and fit the high quality Riv-nuts provided with the cage. This is a 2 piece cage joined by FIA approved lap joints. The cage consists of a centre X with harness bars and curved gusseting. These are available powder coated in a range of colours!

GBP 907.20
1

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This cage offers substantial protection whilst avoiding any permanent changes to the vehicle. The rear mounts bolt direct to the rear strut tops whilst the front plates sit on top of the rear seat shelf, simply mark and drill the holes for the front plates and fit the high quality Riv-nuts provided with the cage. This is a 2 piece cage joined by FIA approved lap joints. The cage consists of a centre X with harness bars and curved gusseting. These are available powder coated in a range of colours!

GBP 1228.50
1

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This cage offers substantial protection whilst avoiding any permanent changes to the vehicle. The rear mounts bolt direct to the rear strut tops whilst the front plates sit on top of the rear seat shelf, simply mark and drill the holes for the front plates and fit the high quality Riv-nuts provided with the cage. This is a 2 piece cage joined by FIA approved lap joints. The cage consists of a centre X with harness bars and curved gusseting. These are available powder coated in a range of colours!

GBP 1455.30
1

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This cage offers substantial protection whilst avoiding any permanent changes to the vehicle. The rear mounts bolt direct to the rear strut tops whilst the front plates sit on top of the rear seat shelf, simply mark and drill the holes for the front plates and fit the high quality Riv-nuts provided with the cage. This is a 2 piece cage joined by FIA approved lap joints. The cage consists of a centre X with harness bars and curved gusseting. These are available powder coated in a range of colours!

GBP 1360.80
1

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This cage offers substantial protection whilst avoiding any permanent changes to the vehicle. The rear mounts bolt direct to the rear strut tops whilst the front plates sit on top of the rear seat shelf, simply mark and drill the holes for the front plates and fit the high quality Riv-nuts provided with the cage. This is a 2 piece cage joined by FIA approved lap joints. The cage consists of a centre X with harness bars and curved gusseting. These are available powder coated in a range of colours!

GBP 1134.00
1

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Unpainted, Material: Standard CDS)

MAZDA RX-7 FD CLUBSPORT HALF CAGE (Colour: Unpainted, Material: Standard CDS)

This cage offers substantial protection whilst avoiding any permanent changes to the vehicle. The rear mounts bolt direct to the rear strut tops whilst the front plates sit on top of the rear seat shelf, simply mark and drill the holes for the front plates and fit the high quality Riv-nuts provided with the cage. This is a 2 piece cage joined by FIA approved lap joints. The cage consists of a centre X with harness bars and curved gusseting. These are available powder coated in a range of colours!

GBP 756.00
1

MK3 Audi TT Clubsport half cage (Colour: Unpainted, Material: Standard CDS)

MK3 Audi TT Clubsport half cage (Colour: Unpainted, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage  uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed.   Available in a range of colours  Available in CDS or lightweight T45 

GBP 945.00
1

MK3 Audi TT Clubsport half cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK3 Audi TT Clubsport half cage (Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage  uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed.   Available in a range of colours  Available in CDS or lightweight T45 

GBP 1260.00
1

MK3 Audi TT Clubsport half cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK3 Audi TT Clubsport half cage (Colour: Specific RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage  uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed.   Available in a range of colours  Available in CDS or lightweight T45 

GBP 1373.40
1

MK3 Audi TT Clubsport half cage (Colour: Specific RAL, Material: Standard CDS)

MK3 Audi TT Clubsport half cage (Colour: Specific RAL, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage  uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed.   Available in a range of colours  Available in CDS or lightweight T45 

GBP 1121.40
1

MK3 Audi TT Clubsport half cage (Material: Standard CDS)

MK3 Audi TT Clubsport half cage (Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage  uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed.   Available in a range of colours  Available in CDS or lightweight T45 

GBP 1008.00
1

MK3 Audi TT Clubsport half cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK3 Audi TT Clubsport half cage (Colour: Unpainted, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage  uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed.   Available in a range of colours  Available in CDS or lightweight T45 

GBP 1197.00
1

MK3 Audi TT Clubsport half cage (Colour: Specific Metallic RAL, Material: Standard CDS)

MK3 Audi TT Clubsport half cage (Colour: Specific Metallic RAL, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage  uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed.   Available in a range of colours  Available in CDS or lightweight T45 

GBP 1171.80
1

MK3 Audi TT Clubsport half cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK3 Audi TT Clubsport half cage (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with harness bars and curved gussets with a rear X, This Clubsport cage  uses existing mounting points at the rear, one hole at the rear is pre threaded however the second hole needs drilling bigger to fit a 10mm Riv-Nut into. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts or use nuts from the underside, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed.   Available in a range of colours  Available in CDS or lightweight T45 

GBP 1423.80
1

LANDROVER DISCOVERY 1 CAMEL TROPHY ROOF RACK - PRE ORDER (PRE ORDER: FULL AMMOUNT DISCOUNTED)

LANDROVER DISCOVERY 1 CAMEL TROPHY ROOF RACK - PRE ORDER (PRE ORDER: FULL AMMOUNT DISCOUNTED)

WE ARE CURRENTLY DEEP IN THE DEVELOPMENT OF BRINGING BACK THE ORIGIONAL CAMEL TROPHY ROOF RACK! THE RACK WILL COME AS SHOWN READY TO FIT ACCOMPANIED WITH OUR INTERNAL ROLL CAGE. PLEASE NOTE YOU MUST HAVE OUR ROLL CAGE TO FIT THIS RACK. THIS RACK IS BASED OFF THE ORIGIONAL WHICH CARRIED A CANOE, 2 BIKES AND A LARGE ARRAY OF TOOLS AND LUGGAGE. MOUNTING HOLES ARE TO BE DRILLED WITH THE RACK IN SITUE DURING ALIGNMENT. SPACERS FOR THE ROOF PROVIDED. DELIVERY TO BE QUOTED CASE BY CASE, PLEASE CONTACT FOR A QUOTE. POWDERCOATED SATIN BLACK. £2800 RRP 50% DEPOSIT SECURES A PRE ORDER 100% DEPOSIT SECURES A TOTAL DISCOUNT OF £200 PRE ORDER OF CAGE AND RACK TOGETHER SECURES A DISCOUNT OF £400   OTHER PRODUCTS TO ACCOMPANY THIS WILL SOON BE AVAILABLE.    

GBP 3120.00
1

LANDROVER DISCOVERY 1 CAMEL TROPHY ROOF RACK - PRE ORDER (PRE ORDER: 50% DEPOSIT)

LANDROVER DISCOVERY 1 CAMEL TROPHY ROOF RACK - PRE ORDER (PRE ORDER: 50% DEPOSIT)

WE ARE CURRENTLY DEEP IN THE DEVELOPMENT OF BRINGING BACK THE ORIGIONAL CAMEL TROPHY ROOF RACK! THE RACK WILL COME AS SHOWN READY TO FIT ACCOMPANIED WITH OUR INTERNAL ROLL CAGE. PLEASE NOTE YOU MUST HAVE OUR ROLL CAGE TO FIT THIS RACK. THIS RACK IS BASED OFF THE ORIGIONAL WHICH CARRIED A CANOE, 2 BIKES AND A LARGE ARRAY OF TOOLS AND LUGGAGE. MOUNTING HOLES ARE TO BE DRILLED WITH THE RACK IN SITUE DURING ALIGNMENT. SPACERS FOR THE ROOF PROVIDED. DELIVERY TO BE QUOTED CASE BY CASE, PLEASE CONTACT FOR A QUOTE. POWDERCOATED SATIN BLACK. £2800 RRP 50% DEPOSIT SECURES A PRE ORDER 100% DEPOSIT SECURES A TOTAL DISCOUNT OF £200 PRE ORDER OF CAGE AND RACK TOGETHER SECURES A DISCOUNT OF £400   OTHER PRODUCTS TO ACCOMPANY THIS WILL SOON BE AVAILABLE.    

GBP 1680.00
1

LANDROVER DISCOVERY 1 CAMEL TROPHY ROOF RACK - PRE ORDER (PRE ORDER: RACK AND CAGE PACKAGE)

LANDROVER DISCOVERY 1 CAMEL TROPHY ROOF RACK - PRE ORDER (PRE ORDER: RACK AND CAGE PACKAGE)

WE ARE CURRENTLY DEEP IN THE DEVELOPMENT OF BRINGING BACK THE ORIGIONAL CAMEL TROPHY ROOF RACK! THE RACK WILL COME AS SHOWN READY TO FIT ACCOMPANIED WITH OUR INTERNAL ROLL CAGE. PLEASE NOTE YOU MUST HAVE OUR ROLL CAGE TO FIT THIS RACK. THIS RACK IS BASED OFF THE ORIGIONAL WHICH CARRIED A CANOE, 2 BIKES AND A LARGE ARRAY OF TOOLS AND LUGGAGE. MOUNTING HOLES ARE TO BE DRILLED WITH THE RACK IN SITUE DURING ALIGNMENT. SPACERS FOR THE ROOF PROVIDED. DELIVERY TO BE QUOTED CASE BY CASE, PLEASE CONTACT FOR A QUOTE. POWDERCOATED SATIN BLACK. £2800 RRP 50% DEPOSIT SECURES A PRE ORDER 100% DEPOSIT SECURES A TOTAL DISCOUNT OF £200 PRE ORDER OF CAGE AND RACK TOGETHER SECURES A DISCOUNT OF £400   OTHER PRODUCTS TO ACCOMPANY THIS WILL SOON BE AVAILABLE.    

GBP 4920.00
1

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Colour: Specific RAL, Material: Standard CDS)

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Colour: Specific RAL, Material: Standard CDS)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with side gussets and a rear diagonal with harness bars with 2 gussets up top to replicate the GT3 cages. This Club sport cage  mounts at the rear in front of the boot tray you will need to drill and insert the riv-nuts provided. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. The Rear quarter trims will need a small section cutting out where the hoop feet sit, other than that the cage fits with all trim intact.   Available in a range of colours  Available in CDS or lightweight T45 

GBP 1008.00
1

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

MK3 Audi TTRS CLUBSPORT GT3 STYLE CAGE (Colour: Specific Metallic RAL, Material: LIGHTWEIGHT BS4-T45 - Unapproved for competition)

This Cage Offers a high level of protection as well as outstanding aesthetic appeal. The cage is complimented by X centre with side gussets and a rear diagonal with harness bars with 2 gussets up top to replicate the GT3 cages. This Club sport cage  mounts at the rear in front of the boot tray you will need to drill and insert the riv-nuts provided. The hoop feet sit on the beam behind the front seats, you will need to drill and fit riv-nuts, this beam uses Hardened steel so you will need to use tungsten-carbide drill bits and plenty of oil to get through at a slow speed. The Rear quarter trims will need a small section cutting out where the hoop feet sit, other than that the cage fits with all trim intact.   Available in a range of colours  Available in CDS or lightweight T45 

GBP 1297.80
1