tarot of the divine from GBP 0 | See the cheapest prices and offers on css.lazzaweb.dk

Screw Cover Caps - 6-8 Gauge Black - Pack of 100

PVC screw caps can be used to provide an aesthetically pleasing finish to the heads of screws that are used during the fitting of wall cladding.

GBP 4.09

1

Screw Cover Caps - 6-8 Gauge Light Grey - Pack of 100

PVC screw caps can be used to provide an aesthetically pleasing finish to the heads of screws that are used during the fitting of wall cladding.

GBP 4.09

1

Screw Cover Caps - 6-8 Gauge Dark Grey - Pack of 100

PVC screw caps can be used to provide an aesthetically pleasing finish to the heads of screws that are used during the fitting of wall cladding.

GBP 4.09

1

Screw Cover Caps - 6-8 Gauge White - Pack of 100

Screw Cover Cups feature an integrated washer which reduces the installation time required to fit them. These plastic screw covers provide a neat finish while protecting the fasteners from potential damage. These screw cover caps are suitable for a large range of screw sizes, reducing stock requirements.andnbsp;

GBP 4.09

1

Corrugated Sheet Fixing Screws - Clear - Pack of 10

A pack of 10 fixing screws for use with 1.1mm and 1.3mm thick clear corrugated sheets.

GBP 2.62

1

Flat Packer - 1mm x 28mm x 100mm - Box of 100

GBP 4.12

1

Dry Verge Unit Right Hand - Grey

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 3.85

1

Dry Verge Unit Right Hand - Brown

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 4.13

1

Dry Verge Unit Left Hand - Grey

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 3.85

1

Dry Verge Unit Left Hand - Terracotta

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 4.13

1

Dry Verge Unit Left Hand - Brown

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 4.13

1

Dry Verge Unit Right Hand - Terracotta

Each Dry verge unit clips onto the tail fins of the previous unit to ensure that it is correctly located.The dry verge unit is nailed into the tile batten through one of the holes in the tail of the unit.Dry verge units are handed. Most orders are comprised of an equal number of left and right units, but for the sake of clarity the handing of Manthorpe dry verge units is shown below;

GBP 4.13

1

Balustrade Newel To Hand Rail L-Shape Bracket - 50mm x 40mm

This bracket secures the Handrail to the Newels on the outer sections of the balustrade systems. Another element of security and stability, the bracket is screwed onto the rail and the post in order to fix the two components.

GBP 1.15

1

Composite Decking Forte Adjustable Cradle - 10mm - 40mm

Cradles are used in the substructure of a composite decking application. Their purpose is to hold and support the joists and their height can be adjusted in order to change the overall height of the decking.

GBP 2.60

1

Composite Decking Forte Adjustable Cradle - 10mm

Cradles are used in the substructure of a composite decking application. Their purpose is to hold and support the joists and their height can be adjusted in order to change the overall height of the decking.

GBP 2.08

1

White Fascia Capping Board Internal Corner - 300mm

Internal corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. Internal corners are usually found at the foot of a valley on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Internal corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.54

1

Balustrade Spindle Insert - 37mm x 37mm

Spindle inserts are measured and fixed onto the bottom handrails and the top of the spindle posts. They are inserted into the hollow top of the spindle in order to attach the upper and lower handrails. This helps ensure the spindles are fixed securely and evenly positioned along the handrails for the smartest and sleekest finish.

GBP 0.34

1

Gutter Trim Internal Corner

Both the gutter andamp; check kerb have internal corners in black. These components make the detailing of roof perimeters fast and easy, saving the need and time of trying to manufacture neat corners on site.

GBP 2.98

1

Check Kerb Internal Corner

Both the gutter andamp; check kerb have internal corners in black. These components make the detailing of roof perimeters fast and easy, saving the need and time of trying to manufacture neat corners on site.

GBP 3.10

1

Dry Verge Eaves Starter - Terracota

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Dry Verge Eaves Starter - Grey

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Dry Verge Eaves Starter - Brown

This universal starter, or eaves closure as it is often referred to as, is used at the eaves to ensure that the system is fully closed at the bottom of the verge.The first dry verge unit is secured onto the eaves starter via a clip that engages with the outer fins of the eaves starter unit.

GBP 3.29

1

Bullnose Fascia End Cap Pair - 100mm x 25mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This end cap is 100mm long overall, consisting of a pair of end caps.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 1.34

1

Ogee Fascia Corner - 300mm White

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Â Fascia corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.98

1

White Fascia Capping Board Double End Corner - 500mm x 42mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.37

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)

Screw Cover Caps - 6-8 Gauge Black - Pack of 100

Screw Cover Caps - 6-8 Gauge Light Grey - Pack of 100

Screw Cover Caps - 6-8 Gauge Dark Grey - Pack of 100

Screw Cover Caps - 6-8 Gauge White - Pack of 100

Corrugated Sheet Fixing Screws - Clear - Pack of 10

Flat Packer - 1mm x 28mm x 100mm - Box of 100

Dry Verge Unit Right Hand - Grey

Dry Verge Unit Right Hand - Brown

Dry Verge Unit Left Hand - Grey

Dry Verge Unit Left Hand - Terracotta

Dry Verge Unit Left Hand - Brown

Dry Verge Unit Right Hand - Terracotta

Balustrade Newel To Hand Rail L-Shape Bracket - 50mm x 40mm

Composite Decking Forte Adjustable Cradle - 10mm - 40mm

Composite Decking Forte Adjustable Cradle - 10mm

White Fascia Capping Board Internal Corner - 300mm

Balustrade Spindle Insert - 37mm x 37mm

Gutter Trim Internal Corner

Check Kerb Internal Corner

Dry Verge Eaves Starter - Terracota

Dry Verge Eaves Starter - Grey

Dry Verge Eaves Starter - Brown

Bullnose Fascia End Cap Pair - 100mm x 25mm White

Ogee Fascia Corner - 300mm White

White Fascia Capping Board Double End Corner - 500mm x 42mm

Powered by Cobiro