44 results (0,18219 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

White Fascia Capping Board Joint - 300mm

White Fascia Capping Board Joint - 300mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.75
1

White Fascia Capping Board Double End Joint - 500mm x 42mm

White Fascia Capping Board Double End Joint - 500mm x 42mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.29
1

White Fascia Capping Board External Corner - 300mm

White Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.83
1

Fascia Double End Joint Trim - 500mm x 35mm White

Fascia Double End Joint Trim - 500mm x 35mm White

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.ÂÂandnbsp;Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.75
1

White Fascia Capping Board Double End Corner - 500mm x 42mm

White Fascia Capping Board Double End Corner - 500mm x 42mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 2.52
1

Fascia Double End Corner Trim - 500mm x 35mm White

Fascia Double End Corner Trim - 500mm x 35mm White

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.02
1

White Fascia Capping Board Internal Corner - 300mm

White Fascia Capping Board Internal Corner - 300mm

Internal corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. Internal corners are usually found at the foot of a valley on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Internal corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 3.77
1

Standard Woodgrain / Grooved Composite Decking Starter Clip - Stainless Steel w/ Screws

Standard Woodgrain / Grooved Composite Decking Starter Clip - Stainless Steel w/ Screws

Stainless steel starter clips for our Standard Woodgrain / Grooved Composite Decking Boards should be used for securing the first line and the last line of your decking. Starter clips should be installed with a minimum spacing of 300mm centres. ( 12 Clips per Length ).Sold Per Each.KEY BENEFITS OF THIS PRODUCT10 year guarantee.Anti-slip finish.No rotting, splintering, warping or algae growth.Easy installation.Environmentally friendly.Maintenance free.

GBP 0.22
1

Weatherboard Cladding Butt Joint - Colonial Blue

Weatherboard Cladding Butt Joint - Colonial Blue

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56
1

Weatherboard Cladding Butt Joint - Sand

Weatherboard Cladding Butt Joint - Sand

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56
1

Bullnose Fascia Large End Cap - 300mm x 25mm White

Bullnose Fascia Large End Cap - 300mm x 25mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This end cap is 313mm long overall, with a 300mm useable length (one curved edge).Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 3.82
1

Bullnose Fascia End Cap Pair - 100mm x 25mm White

Bullnose Fascia End Cap Pair - 100mm x 25mm White

Our Bullnose fascia is manufactured by Freefom, it is 18mm thick and it comes in a range of widths from 150mm to 250mm.This end cap is 100mm long overall, consisting of a pair of end caps.Bullnose fascia boards can be fixed directly to the rafter ends without the need for a backing board, itandnbsp;should be fixed using 2 x 65mm polytop nails at each rafter (maximum spacing 600mm).The rear of the board is rebated at the bottom edge to accept a soffit board.andnbsp;

GBP 1.68
1

Weatherboard Cladding Butt Joint - Storm Grey

Weatherboard Cladding Butt Joint - Storm Grey

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56
1

Weatherboard Cladding Butt Joint - White

Weatherboard Cladding Butt Joint - White

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green and Sand and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56
1

FloPlast Shiplap Cladding Butt Joint - 150mm White

FloPlast Shiplap Cladding Butt Joint - 150mm White

The 150mm UPVC Shiplap Cladding Butt Joint Trim is to be used to join boards together and when used, breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Shiplap Cladding Butt joint is available in White, Anthracite Grey, Black Ash, Golden Oak or Rosewood and is to be used with the 150mm Shiplap Cladding boards.For more information on cladding joints please take a look at our short video:

GBP 1.42
1

Weatherboard Cladding Butt Joint - Anthracite Grey

Weatherboard Cladding Butt Joint - Anthracite Grey

The Weatherboard Cladding Butt Joint Trim is to be used to join boards together and when used breaks up the line a little bit on larger installations covering the joint in a staggered effect.The butt joint is usually used as an alternative to a centre joint trim which produces a straight line joint.The Butt joint is available across the Weatherboard Cladding range including White, Colonial Blue, Storm Grey, Slate Grey, Sage Green, Misty Grey, Pale Gold, Sand and Anthracite Grey and is to be used in conjunction the 170mm Weatherboard panel.

GBP 3.56
1