20 results (0,15489 seconds)

Show all filters

Brand

Merchant

Price (EUR)

Reset filter

Products
From
Shops

FloPlast Fascia Bargeboard Finial - 340mm Golden Oak

FloPlast Fascia Bargeboard Finial - 340mm Golden Oak

Bargeboard finials are a more decorative way of covering the joint between the two bargeboards at the apex of the roof.To enable the barge boards to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.This rule should be always applied to any corner or joint cover on any PVC fascia installation.

GBP 9.41
1

Golden Oak Fascia Capping Board External Corner - 300mm

Golden Oak Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 9.48
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Golden Oak

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Golden Oak

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 9.79
1

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Golden Oak

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Golden Oak

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 9.48
1

FloPlast Shiplap Cladding Drip Trim - 5mtr White

FloPlast Shiplap Cladding Drip Trim - 5mtr White

The Cladding Drip Trim will usually be used above a door or window head to deflect any running water away from the opening which can be useful during periods of adverse weather.This trim is 5 metres in length and should be used in conjunction with UPVC Shiplap or V Joint Cladding and is suitable for external use on buildings as a decorative and protective facing.The drip trim is available in White, Anthracite Grey, Black Ash, Golden Oak or Rosewood.For more information please take a look at our Introduction to Cladding video below:

GBP 13.61
1

FloPlast Shiplap Cladding Universal Channel - 5mtr White

FloPlast Shiplap Cladding Universal Channel - 5mtr White

The Universal Channel trim is general purpose trim used to tidy up the edges of all cladding installations either by closing off or framing. When installed the end of the cladding will sit inside the channel ensuring that all cut edges are hidden.This trim is 5 metres in length and should be used in conjunction with UPVC Shiplap or V Joint Cladding and is suitable for external use on buildings as a decorative and protective facing.The universal channel is available in White, Anthracite Grey, Black Ash, Golden Oak or Rosewood.For installation advice please see our guides and tips pages.

GBP 13.37
1

FloPlast Shiplap Cladding Starter Trim - 5mtr White

FloPlast Shiplap Cladding Starter Trim - 5mtr White

The Cladding Starter Trim gives a solid base from which to begin the installation, with the first length of cladding slotting directly into the purpose made channel.The trim should be mounted to the wall before cladding is installed and should be used in conjunction with UPVC Shiplap or V Joint Cladding for external use on buildings as a decorative and protective facing.The bottom return leg allows an element of batten cover for mid-height installations whilst still allowing air to circulate behind the cladding.The starter trim is available in White, Anthracite Grey, Black Ash, Golden Oak or Rosewood.For more information please take a look at our Introduction to Cladding video below:

GBP 11.84
1

175mm White Fascia Capping Board - 9mm x 5mtr

175mm White Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 16.64
1

150mm White Fascia Capping Board - 9mm x 5mtr

150mm White Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 14.92
1

100mm White Fascia Capping Board - 9mm x 5mtr

100mm White Fascia Capping Board - 9mm x 5mtr

Our 9mm UPVC Cover Boards are available in five colour options - White, Black Ash, Anthracite Grey, Rosewood and Golden Oak. They come in a range of sizes from 100mm to 275mm (this varies depending upon the colour choice).Cover boards are generally used for covering existing timber fascia or window boards, but they are also used on new installations. In new build applications a timber backing board is used behind the cover board to support it along its length (we recommend 25mm thick sawn timber).Cover boards are measured externally including the bottom return leg, ie. a 200mm Cover board will cover 191mm of existing timber. The return leg measures 42mm overall (33mm Internal).PVC cover boards should be fixed using 2 x 50mm Polytop Nails no further than 600mm apart for white boards (max 400mm for woodgrain coloured boards). This means that you should allow 18 nails for each 5m length in white, and 26 for colours.

GBP 14.53
1