142 results (0,16927 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Plastic Headed Pins - 40mm White - Box of 250

Plastic Headed Pins - 40mm White - Box of 250

Often referred to as polytop nails and pins, our A4 Stainless steel plastic headed nails and pins are made from marine grade stainless steel to ensure that they will not rust over time.Cheap inferior fixings can save a few pounds on a roofline installation but they will cause no end of problems - including structural failure and unsightly staining of the PVC fascia system. We heartily recommend that you should not be tempted to take the risk, as rectification of such problems is a complicated and costly process.65mm plastic headed nail are generally used for installing replacement fascia boards. 50mm nails should be used to fix cover boards in place, whilst 40mm and sometimes 30mm pins are used for fixing soffits.

GBP 14.68
1

Plastic Headed Nails - 50mm White - Box of 100

Plastic Headed Nails - 50mm White - Box of 100

Often referred to as polytop nails and pins, our A4 Stainless steel plastic headed nails and pins are made from marine grade stainless steel to ensure that they will not rust over time.Cheap inferior fixings can save a few pounds on a roofline installation but they will cause no end of problems - including structural failure and unsightly staining of the PVC fascia system. We heartily recommend that you should not be tempted to take the risk, as rectification of such problems is a complicated and costly process.65mm plastic headed nail are generally used for installing replacement fascia boards. 50mm nails should be used to fix cover boards in place, whilst 40mm and sometimes 30mm pins are used for fixing soffits.

GBP 14.68
1

Plastic Headed Pins - 30mm White - Box of 250

Plastic Headed Pins - 30mm White - Box of 250

Often referred to as polytop nails and pins, our A4 Stainless steel plastic headed nails and pins are made from marine grade stainless steel to ensure that they will not rust over time.Cheap inferior fixings can save a few pounds on a roofline installation but they will cause no end of problems - including structural failure and unsightly staining of the PVC fascia system. We heartily recommend that you should not be tempted to take the risk, as rectification of such problems is a complicated and costly process.65mm plastic headed nail are generally used for installing replacement fascia boards. 50mm nails should be used to fix cover boards in place, whilst 40mm and sometimes 30mm pins are used for fixing soffits.

GBP 14.68
1

Plastic Headed Nails - 65mm White - Box of 100

Plastic Headed Nails - 65mm White - Box of 100

Often referred to as polytop nails and pins, our A4 Stainless steel plastic headed nails and pins are made from marine grade stainless steel to ensure that they will not rust over time.Cheap inferior fixings can save a few pounds on a roofline installation but they will cause no end of problems - including structural failure and unsightly staining of the PVC fascia system. We heartily recommend that you should not be tempted to take the risk, as rectification of such problems is a complicated and costly process.65mm plastic headed nail are generally used for installing replacement fascia boards. 50mm nails should be used to fix cover boards in place, whilst 40mm and sometimes 30mm pins are used for fixing soffits.

GBP 14.68
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Rosewood

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Rosewood

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.40
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Black Ash Woodgrain

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Black Ash Woodgrain

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.40
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Golden Oak

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Golden Oak

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.40
1

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Anthracite Grey

FloPlast Fascia Double End Joint Trim - 500mm x 35mm Anthracite Grey

Joint covers are used to hide the 10mm expansion gap that should be left between two fascia boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.40
1

Black Ash Woodgrain Fascia Capping Board External Corner - 300mm

Black Ash Woodgrain Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.08
1

Golden Oak Fascia Capping Board External Corner - 300mm

Golden Oak Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.08
1

Rosewood Fascia Capping Board External Corner - 300mm

Rosewood Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.08
1

Anthracite Grey Fascia Capping Board External Corner - 300mm

Anthracite Grey Fascia Capping Board External Corner - 300mm

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.08
1

Ogee Fascia Corner Double Ended - 500mm White

Ogee Fascia Corner Double Ended - 500mm White

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.andnbsp;Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.02
1

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Anthracite Grey

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Anthracite Grey

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.08
1

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Rosewood

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Rosewood

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.08
1

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Black Ash Woodgrain

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Black Ash Woodgrain

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.08
1

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Golden Oak

FloPlast Fascia Double End Corner Trim - 500mm x 35mm Golden Oak

Corner trims are used to hide the 10mm expansion gap that should be left between two fascia boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 10.08
1

Pressure Sensitive Russ Strip - 152mm (per metre)

Pressure Sensitive Russ Strip - 152mm (per metre)

It is common for non-reinforced EPDM membranes to, over time, try and pull back to the centre of the membranes. The RUSS (Reinforced Universal Secure Strip) or base tie-in controls the membrane movement and stops the membrane moving away from the perimeter of the roof. The RUSS can be installed in conjunction with 50mm Seam Fastening Plates (300600) below the EPDM membrane for additional membrane securement. Must be used with ClassicBond EPDM Primer (302060). 152mm wide - the tape can be cut to the desired length and will come in one piece up to 30.5mtr long, after which additional rolls will be cut.

GBP 13.41
1