71 results (0,17066 seconds)

Show all filters

Brand

Show all

Merchant

Price (EUR)

Reset filter

Products
From
Shops

Black Ash Woodgrain Fascia Capping Board Joint - 300mm

Black Ash Woodgrain Fascia Capping Board Joint - 300mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 7.93
1

Ogee Fascia Joint Double Ended - 500mm White

Ogee Fascia Joint Double Ended - 500mm White

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 8.59
1

Anthracite Grey Fascia Capping Board Joint - 300mm

Anthracite Grey Fascia Capping Board Joint - 300mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 7.93
1

Golden Oak Fascia Capping Board Joint - 300mm

Golden Oak Fascia Capping Board Joint - 300mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 7.93
1

Rosewood Fascia Capping Board Joint - 300mm

Rosewood Fascia Capping Board Joint - 300mm

Fascia joint covers are used to hide the 10mm expansion gap that should be left between two boards.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Double ended joints can be cut to size with a standard hacksaw or fine toothed saw.

GBP 7.93
1

Ogee Fascia Corner - 300mm White

Ogee Fascia Corner - 300mm White

Corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint. Fascia corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 4.98
1

Ogee Fascia Internal Corner - 300mm White

Ogee Fascia Internal Corner - 300mm White

Internal corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. Internal corners are usually found at the foot of a valley on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Internal corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 6.60
1

Black Ash Woodgrain Fascia Capping Board Internal Corner - 300mm

Black Ash Woodgrain Fascia Capping Board Internal Corner - 300mm

Internal corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. Internal corners are usually found at the foot of a valley on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Internal corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 7.40
2

Golden Oak Fascia Capping Board Internal Corner - 300mm

Golden Oak Fascia Capping Board Internal Corner - 300mm

Internal corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. Internal corners are usually found at the foot of a valley on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Internal corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 7.40
1

Rosewood Fascia Capping Board Internal Corner - 300mm

Rosewood Fascia Capping Board Internal Corner - 300mm

Internal corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. Internal corners are usually found at the foot of a valley on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.Internal corners can be cut to size with a standard hacksaw or fine toothed saw.

GBP 7.40
1

White Fascia Capping Board External Corner Joint Trim - 135 Degree x 300mm

White Fascia Capping Board External Corner Joint Trim - 135 Degree x 300mm

135 Degree corner trims are used to hide the 10mm expansion gap that should be left between two boards at the corner of the eaves. 135 degree corners (or 45 degree corners as they are also called) are usually found above a bay window on a roof.To enable the system to expand and contract correctly in a different range of temperatures, one side of any joint or corner on any PVC fascia installation should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.All corner trims can be cut to size with a standard hacksaw or fine toothed saw

GBP 4.75
1

Fascia Bargeboard Finial - 340mm White

Fascia Bargeboard Finial - 340mm White

Bargeboard finials are a more decorative way of covering the joint between the two bargeboards at the apex of the roof.To enable the barge boards to expand and contract correctly in a different range of temperatures, one side of the finial should be glued to the board and the other side should be sealed with low modulus silicon, which allows movement within the joint.This rule should be always applied to any corner or joint cover on any PVC fascia installation.

GBP 8.74
1

Pressure Sensitive Seam/ Secure Tape - 76mm (per metre)

Pressure Sensitive Seam/ Secure Tape - 76mm (per metre)

ClassicBond pressure sensitive seam tape is manufactured with a clear poly backing for easier on-site application. ClassicBond seam tape offers 30% greater peel and sheer strength compared to other similar products in the market. Designed for use with EPDM roofing systems to fuse the EPDM membranes together when installing an overlap seam. 76mm wide - the tape can be cut to the desired length and will come in one piece up to 30.5M long, after which additional rolls will be cut. Must be used with ClassicBond EPDM Primer (302060)

GBP 5.65
1

Stone Cladding Panel - 600mm x 150mm x 15mm Kandla Grey

Stone Cladding Panel - 600mm x 150mm x 15mm Kandla Grey

Our kandla grey stone cladding panels can be installed on both indoor and outdoor walls to create a beautiful, natural looking space. They can also be used for other applications such as clad raised furniture or outdoor water features. Each of our stone cladding panels are 600mm in length, 150mm in width and 15mm thick. They are fully frost resistant and feature a riven surface and sawn edges to create an aesthetically pleasing finish.

GBP 6.16
1

Stone Cladding Panel - 600mm x 150mm x 15mm Black Slate

Stone Cladding Panel - 600mm x 150mm x 15mm Black Slate

Our black slate cladding panels can be installed on both indoor and outdoor walls to create a beautiful, natural looking space. They can also be used for other applications such as clad raised furniture or outdoor water features. Each of our slate cladding panels are 600mm in length, 150mm in width and 15mm thick. They are fully frost resistant and feature a riven surface and sawn edges to create an aesthetically pleasing finish.

GBP 6.16
1

Stone Cladding Panel - 600mm x 150mm x 15mm Graphite

Stone Cladding Panel - 600mm x 150mm x 15mm Graphite

Our graphite stone cladding panels can be installed on both indoor and outdoor walls to create a beautiful, natural looking space. They can also be used for other applications such as clad raised furniture or outdoor water features. Each of our stone cladding panels are 600mm in length, 150mm in width and 15mm thick. They are fully frost resistant and feature a riven surface and sawn edges to create an aesthetically pleasing finish.

GBP 6.16
1

Stone Cladding Panel - 600mm x 150mm x 15mm Green Slate

Stone Cladding Panel - 600mm x 150mm x 15mm Green Slate

Our green slate cladding panels can be installed on both indoor and outdoor walls to create a beautiful, natural looking space. They can also be used for other applications such as clad raised furniture or outdoor water features. Each of our slate cladding panels are 600mm in length, 150mm in width and 15mm thick. They are fully frost resistant and feature a riven surface and sawn edges to create an aesthetically pleasing finish.

GBP 6.16
1