lundhags cap from GBP 5 | See the cheapest prices and offers on css.lazzaweb.dk

Stainless Steel Balustrade Flat End Cap - 48.3mm Diameter

End Cap Flat Top designed to be used with Ecoscape balustrade systems.

GBP 4.62

1

Standard Composite Cladding End Cap - 56mm x 49.5mm x 3.6mtr Natural

Composite Cladding End Cap is the perfect finishing touch for your composite wall cladding project, providing a seamless, colour-coordinated edge.The end cap is designed for use at junctions where wall cladding meets an adjoining structure, such as on semi-detached properties, or to neatly cap off cladding boards at corners.

GBP 15.20

1

Fascia End Cap - 300mm Black Smooth

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia board does not terminate at a corner. It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue. Freefoamand#039;s replacement fascia end cap is 300mm in length.

GBP 4.81

1

Fascia End Cap - 300mm White Woodgrain

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia board does not terminate at a corner. It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue. Freefoamand#039;s replacement fascia end cap is 300mm in length.

GBP 5.62

1

Fascia End Cap - 300mm Chartwell Green Woodgrain

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia board does not terminate at a corner. It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue. Freefoamand#039;s replacement fascia end cap is 300mm in length.

GBP 5.62

1

Fascia End Cap - 300mm Anthracite Grey Smooth

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia board does not terminate at a corner. It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue. Freefoamand#039;s replacement fascia end cap is 300mm in length.

GBP 4.81

1

Laminate Wall Panel End Cap Trim - 2420mm Black

These trims are used to cap off the edge of a laminate wall panel and provide an aesthetically pleasing finish.

GBP 15.91

1

Laminate Wall Panel End Cap Trim - 2420mm White

These trims are used to cap off the edge of a laminate wall panel and provide an aesthetically pleasing finish.

GBP 15.91

1

Laminate Wall Panel End Cap Trim - 2420mm Aluminium

These trims are used to cap off the edge of a laminate wall panel and provide an aesthetically pleasing finish.

GBP 13.64

1

Laminate Wall Panel End Cap Trim - 2420mm Silver

These trims are used to cap off the edge of a laminate wall panel and provide an aesthetically pleasing finish.

GBP 20.18

1

Fascia End Cap - 300mm Dark Grey Smooth

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia board does not terminate at a corner. It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue. Freefoamand#039;s fascia end cap is 300mm in length and is coated in a smooth dark grey.

GBP 4.81

1

Dry Verge Ridge Cap Angled - Grey

Dry verge ridge caps finish off the installation neatly at the top of the gable.Angled ridge caps provide a sharp apex, whereas round ridge caps give a softer finish.The ridge cap is placed over the end of the ridge tile so that it hooks over both dry verge units. Using the screws provided, screw into the ridge end cap through the desired blind nail hole and into the end of the ridge batten, or, if this is not available, into the top tiling battens.

GBP 6.68

1

Dry Verge Ridge Cap Round - Terracota

Dry verge ridge caps finish off the installation neatly at the top of the gable.Angled ridge caps provide a sharp apex, whereas round ridge caps give a softer finish.The ridge cap is placed over the end of the ridge tile so that it hooks over both dry verge units. Using the screws provided, screw into the ridge end cap through the desired blind nail hole and into the end of the ridge batten, or, if this is not available, into the top tiling battens.

GBP 6.68

1

Dry Verge Ridge Cap Round - Grey

Dry verge ridge caps finish off the installation neatly at the top of the gable.Angled ridge caps provide a sharp apex, whereas round ridge caps give a softer finish.The ridge cap is placed over the end of the ridge tile so that it hooks over both dry verge units. Using the screws provided, screw into the ridge end cap through the desired blind nail hole and into the end of the ridge batten, or, if this is not available, into the top tiling battens.

GBP 6.68

1

Dry Verge Ridge Cap Angled - Terracota

Dry verge ridge caps finish off the installation neatly at the top of the gable.Angled ridge caps provide a sharp apex, whereas round ridge caps give a softer finish.The ridge cap is placed over the end of the ridge tile so that it hooks over both dry verge units. Using the screws provided, screw into the ridge end cap through the desired blind nail hole and into the end of the ridge batten, or, if this is not available, into the top tiling battens.

GBP 6.68

1

Dry Verge Ridge Cap Round - Brown

Dry verge ridge caps finish off the installation neatly at the top of the gable.Angled ridge caps provide a sharp apex, whereas round ridge caps give a softer finish.The ridge cap is placed over the end of the ridge tile so that it hooks over both dry verge units. Using the screws provided, screw into the ridge end cap through the desired blind nail hole and into the end of the ridge batten, or, if this is not available, into the top tiling battens.

GBP 6.68

1

Dry Verge Ridge Cap Angled - Brown

Dry verge ridge caps finish off the installation neatly at the top of the gable.Angled ridge caps provide a sharp apex, whereas round ridge caps give a softer finish.The ridge cap is placed over the end of the ridge tile so that it hooks over both dry verge units. Using the screws provided, screw into the ridge end cap through the desired blind nail hole and into the end of the ridge batten, or, if this is not available, into the top tiling battens.

GBP 6.68

1

Fascia End Cap - 300mm Storm Grey Smooth

End caps work by sealing off the cellular core of the cut board that is exposed and are commonly used when the fascia boards does not terminate at a corner._x000D_It is recommended to use a hacksaw to trim the end cap to match the fascia board size and fix it in place with superglue._x000D_Freefoamand#039;s fascia end cap is 300mm in length and is coated in a smooth storm grey._x000D_Freefoam fascia_x000D_Available in 6 different sizes ranging from 150mm to 410mm in a wide selection of colours featuring Freefoam patented Colourmax technology._x000D_Freefoamand#039;s fascias are BS EN 13245-2:2008 certified.

GBP 4.81

1

Wetwall Bathroom Panel End Cap - 2440mm Polished Silver

Enhance the finish of your Wetwall Alloy panels with the end cap in polished silver colour. Designed to provide a clean, seamless edge, this durable trim protects panel edges while adding a sleek, modern look. Ideal for bathrooms, wet rooms, and shower enclosures, it ensures a polished and professional finish.

GBP 19.81

1

Wetwall Bathroom Panel End Cap - 2440mm Matt Black

Enhance the finish of your Wetwall Alloy panels with the end cap in matt black colour. Designed to provide a clean, seamless edge, this durable trim protects panel edges while adding a sleek, modern look. Ideal for bathrooms, wet rooms, and shower enclosures, it ensures a polished and professional finish.

GBP 19.81

1

Compact Composite Wall Panel End Cap - 2440mm Black Tile

Enhance the finish of your compact wall panels with the end cap in black colour. Designed to provide a clean, seamless edge, this durable trim protects panel edges while adding a sleek, modern look. Ideal for bathrooms, wet rooms, and shower enclosures, it ensures a polished and professional finish.

GBP 17.00

1

Compact Composite Wall Panel End Cap - 2440mm White Tile

Enhance the finish of your compact wall panels with the end cap in white colour. Designed to provide a clean, seamless edge, this durable trim protects panel edges while adding a sleek, modern look. Ideal for bathrooms, wet rooms, and shower enclosures, it ensures a polished and professional finish.

GBP 17.00

1

Compact Composite Wall Panel End Cap - 2450mm Polished Silver

Enhance the finish of your compact wall panels with the end cap in polished silver colour. Designed to provide a clean, seamless edge, this durable trim protects panel edges while adding a sleek, modern look. Ideal for bathrooms, wet rooms, and shower enclosures, it ensures a polished and professional finish.

GBP 20.40

1

Standard Composite Cladding End Cap - 56mm x 49.5mm x 3.6mtr Grey

Composite Cladding End Caps are the perfect finishing touch for your composite wall cladding project, providing a seamless, colour-coordinated edge.These end caps are designed for use at junctions where wall cladding meets an adjoining structure, such as on semi-detached properties, or to neatly cap off cladding boards at corners.

GBP 15.20

1

Standard Composite Cladding End Cap - 56mm x 49.5mm x 3.6mtr Teak

Composite cladding end trim is the perfect finishing touch for your composite wall cladding project, providing a seamless, colour-coordinated edge.These end caps are designed for use at junctions where wall cladding meets an adjoining structure, such as on semi-detached properties, or to neatly cap off cladding boards at corners.

GBP 15.20

1

Awardvindende Google Marketing Powerhouse

Brand

Merchant

Price (EUR)

Stainless Steel Balustrade Flat End Cap - 48.3mm Diameter

Standard Composite Cladding End Cap - 56mm x 49.5mm x 3.6mtr Natural

Fascia End Cap - 300mm Black Smooth

Fascia End Cap - 300mm White Woodgrain

Fascia End Cap - 300mm Chartwell Green Woodgrain

Fascia End Cap - 300mm Anthracite Grey Smooth

Laminate Wall Panel End Cap Trim - 2420mm Black

Laminate Wall Panel End Cap Trim - 2420mm White

Laminate Wall Panel End Cap Trim - 2420mm Aluminium

Laminate Wall Panel End Cap Trim - 2420mm Silver

Fascia End Cap - 300mm Dark Grey Smooth

Dry Verge Ridge Cap Angled - Grey

Dry Verge Ridge Cap Round - Terracota

Dry Verge Ridge Cap Round - Grey

Dry Verge Ridge Cap Angled - Terracota

Dry Verge Ridge Cap Round - Brown

Dry Verge Ridge Cap Angled - Brown

Fascia End Cap - 300mm Storm Grey Smooth

Wetwall Bathroom Panel End Cap - 2440mm Polished Silver

Wetwall Bathroom Panel End Cap - 2440mm Matt Black

Compact Composite Wall Panel End Cap - 2440mm Black Tile

Compact Composite Wall Panel End Cap - 2440mm White Tile

Compact Composite Wall Panel End Cap - 2450mm Polished Silver

Standard Composite Cladding End Cap - 56mm x 49.5mm x 3.6mtr Grey

Standard Composite Cladding End Cap - 56mm x 49.5mm x 3.6mtr Teak

Powered by Cobiro